TX1000 CANDD | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
TX1000 2/2000 REV C Page 1
FEATURES
/circle6 Harmonic Correction to EN61000-3-2 /circle6 Wide Range Input of 90-264VAC /circle6 FCC / CISPR 22 Class A EMI Filtering /circle6 Typical Power Factor of 0.99 /circle6 Active Current Sharing /circle6 Self-Cooled 5”x 4.88”x 12” Chassis /circle6 70-80% Efficiency /circle6 Optional ORing Diode /circle6 UL, CSA, and VDE compliant /circle6 CE Marked /circle6 EN61000-4 Immunity AGENCY APPROVALS Internet: http://www.cdpowerelectronics.com Power Electronics Division, United States
3400 E Britannia Drive, Tucson, Arizona 85706
Phone: 800.547.2537 Fax: 520.770.9369 Power Electronics Division, Europe C&D Technologies (Power Electronics) Ltd. 132 Shannon Industrial Estate, Shannon, Co. Clare, Ireland TX1000
1000 WATT
DESCRIPTION
The TX1000 Series of single-output, 1kW power supplies are fully featured for usage worldwide. With active Power Factor Correction (PFC) to EN61000-3- 2, wide-range input of 90-264V AC , EMI compliance to FCC and CISPR 22, “CE” Mark, and immunity to EN61000-4, the TX1000 series is ready for global deployment. Standard features include remote sense compensation, output voltage adjustment, active current sharing, remote inhibit, power fail warning, DC OK signal, and thermal shutdown. A complete array of output voltages from 2.5 to 48V DC is available. The self-cooled 5” x 4.88” x 12” chassis provides industry- standard modularity that permits optimum flexibility in installation. An optional ORing diode is offered on all models greater than 5V DC models.
Parameters Conditions Min Typ Max Units Operating Range 47-63Hz 90 264 V AC Input Current Nominal line, full load 12 A Inrush Current 120V AC , 250C, cold start 80 A pk 240VAC , 250C, cold start 160 A pk Efficiency Nominal line, full load 70 75 80 % Holdup Full load 20 m sec Power Factor (1) Full load 0.99 Notes: (1) Harmonic currents meet EN61000-3-2 Output Voltages and Maximum Rated Loads Model Output Voltage Output Current TX10005AASLPLNH 5.0 200A TX10005BASLPLNH (1) 12.0 84A TX10005CASLPLNH (1) 15.0 67A TX10005DASLPLNH (1) 18.0 56A TX10005EASLPLNH (1) 24.0 42A TX10005FASLPLNH (1) 28.0 36A TX10005GASLPLNH (1) 36.0 28A TX10005HASLPLNH (1) 48.0 21A TX10005JASLPLNH (1) 20.0 50A TXD10005KASLPLNH (1) 3.3 182A TXD10005LASLPLNH (1) 2.5 200A Notes: (1) Model specified without optional ORing diode; to specify the diode option, replace the letter “N” with the letter “D”, no O-Ring diode on 5V models. Output Specifications Parameter Conditions Min Typ Max Units Output Power All environmental and line conditions 1000 W atts Voltage Adjustment Range Relative to nominal output voltage +5 % Output Regulation Line and load (each) +0.2 % Minimum Load 0 Amps PARD Measured at output terminals, 20MHz 1 % pk-pk Temperature Coefficient 0 0 to 500C +0.2 %/ 0C Environmental Specifications Parameter Conditions Min Typ Max Units Ambient Temperature Output de-rated linearly to 50% of (Operating) rated capacity between 50 0C and 700C 0 +70 0C Ambient Temperature Non-operating -50 +85 0C Altitude (Operating) -200 +10,000 Feet Altitude (Non-operating) -200 +50,000 Feet Shock Per MIL-STD-810D, Method 516.3, Procedure II, in each axis, including NTSA drop test Vibration Per MIL-STD-810D, Method 514.3, Procedure II, in each axis, including NTSA drop test Cooling The TX1000 is provided with an internal cooling fan.
TX1000 2/2000 REV C Page 3 The information provided herein is believed to be reliable; however, C&D TECHNOLOGIES assumes no responsibility for inaccuracies or omissions. C&D TECHNOLOGIES assumes no responsibility for the use of this information, and all use of such information shall be entirely at the user’s own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. C&D TECHNOLOGIES does not authorize or warrant any C&D TECHNOLOGIES product for use in life support devices/systems or in aircraft control applications. Product Features Features Characteristic Remote Sense 500mV compensation Active Current Sharing Single Wire; 5% tolerance if outputs are over 25% of rated load ORing Diode Optional on all models (not available on 5V model) OVP 125% of nominal ( +7.5%) Thermal Shutdown Automatic Restart DC OK Signal Logic “1” when output is within +3% of nominal Power Fail Warning Signal Transition to Logic “0” at least 5msec before loss of output regulation Remote Inhibit Logic “0” applied will inhibit output (referenced to –Sense terminal) Product Compliances Approval Characteristic UL and cUL UL1950, 3 rd Edition (1) VDE EN60950 FCC Class A requirements for conducted emissions CISPR 22 Class A requirements for conducted emissions EN61000-4-2 Electrostatic Discharge, Level 4 EN61000-4-5 Input Surge Immunity, Level 3 EN61000-3-2 Harmonic Currents, Class A CE Mark Low Voltage Directive Notes: (1) UL1950, 3rd Edition incorporates the requirements of CSA 1950. TX1000
Ordering Information
Chassis: “5” = 5” x 4.88” x 12”; “M” = modified Output Voltage: See Chart below Input Filter: “A” designates Class A EMI filter Fan: “S” designates Standard Fan Remote Inhibit: “L ” designates that Logic “0” applied inhibits output “P” designates Active Input Power Factor Correction with widerange input voltage of 90-264 V AC Power Fail Warning: “L ” designates transition to Logic “0” upon loss of AC Output ORing diode: “N” = None; “D” = Diode Option DC OK: “H” designates that Logic “1” indicates a DC OK condition OUTPUT VOLTAGES A = 5V G = 36V B = 12V H = 48V C = 15V J = 20V D = 18V K = 3.3V E = 24V L = 2.5V F = 28V
No. No.
1 Remote Inhibit 10 N/C
2 DC OK 9 - Sense
3 N/C 8 N/C
4 N/C 7 + Sense
5 Power Fail 6 Current Share
.60 12.00 .19 MAX 4.88 +.000 -.170 10 9 2 1 3.0001.008-32UNC-2B.25 MAX. SCREW PENETRA TION
4 PLACES
1.22 V ADJJ1 PIN 1 5.00 .315TYP 1.85 1.95 3.45 TB16-32 UNF-2A PHILSLO T TORQUE TO 9 INCH/LBS MAX.3 PLACES 1.001.60 1/4 - 20 UNC-2AHEX HEAD SCREW2 PLACES 6.375 MECHANICAL J1 CONNECTOR AMP NO. 87579-2 OR EQUIVALENT PIN FUNCTION NO.
1 REMOTE INHIBIT
2 DC OK
3 N/C
4 N/C
5 POWER FAIL
6 CURRENT SHARE
8 N/C
9_ SENSE