TW8820 INTERSIL | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 2

Technical content

Features

 NTSC (M, 4.43) and PAL (B, D, G, H, I, M, N, N combination), PAL (60), SECAM with automatic format detection  10-bit ADC and analog clamping circuit  Fully programmable static gain or automatic gain control for the Y or CVBS channel  Programmable white peak control for the Y or CVBS channel  High quality adaptive 2D comb filter for both NTSC and PAL inputs  PAL delay line for color phase error correction  Image enhancement with 2D dynamic peaking and CTI  Digital sub-carrier PLL for accurate color decoding  Digital horizontal PLL and advanced synchronization processing for VCR playback and weak signal performance  Programmable hue, brightness, saturation, contrast and sharpness TFT PANEL SUPPORT  Built-in programmable timing controller  Supports 3, 4, 6 or 8 bits per pixel up to 16.8 million colors with built-in dithering engine  Supports digital panels up to WVGA/SVGA resolution  Supports Serial (8-bit) RGB panels TIMING CONTROLLER (TCON)  Supports programmable timing interface signals for control  Column (source) driver/row (gate) driver ON SCREEN DISPLAY  6912 byte programmable font RAM and 256 display RAM  Four windows font OSD with bordering/shadowing  1/2/3/4 bits/pixel  Supports variable width (12/16), height (2~32) IMAGE PROCESSING  High quality scaler with both up/down and nonlinear scaling support  Panorama/Water-glass scaling  Built-in 2D de-interlacing function  Programmable hue, brightness, saturation, contrast and sharpness  Programmable cropping of input video and graphics  Independent RGB gain and offset controls  Programmable 8-bit Gamma correction for each color  Operates in Frame Sync mode  Black/White Stretch CLOCK GENERATION  Spread spectrum clock  Selectable Modulation frequency and spread width MCU  Industry standard 8052 based  Code fetch from external SPI flash memory  512 byte XDATA memory POWER MANAGEMENT  Supports functional based independent  Power-down  1.8/3.3V operation

For additional products, see www.intersil.com/product_tree Intersil products are manufactured, assembled and tested utilizing ISO9001 quality systems as noted in the quality certifications found at www.intersil.com/design/quality Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see www.intersil.com MISCELLANEOUS  Supports 2-wire serial bus interface  Built-in Auxiliary ADC input  Single 27MHz crystal  64 pin LQFP package

Applications

 Video door phone intercom display controller  Portable DVD players, media players, and DVRs  Rear Camera Displays TW8820 FUNCTIONAL BLOCK DIAGRAM Triple ADCs Triple ADCs Triple ADCs 2D-Comb Video Decoder Scaler Image Enhance Input Controller Font OSD Output Formatter TCON 2-Wire Serial Bus SPI YIN1~2 TCON signals Flat Panel Out I2C_SDAT I2C_SCLK SPI Serial Data MCU GPIO