TVSA EATON | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Transient voltage ESD suppressor
- Lead free, halogen free and RoHS compliant for global applications
- Single-line, bi-directional device for placement flexibility
- Silicon based chip
- Low capacitance to meet the needs for high speed single transient voltage protection
- Provides ESD protection with fast response time (<1ns) allowing equipment to pass IEC 61000-4-2 level 4 test
- Low profile designs for board space savings
- Low leakage current reduces power consumption
- Low clamping voltage
- Solid-state silicon-avalanche technology Pb HALOGEN HFFREE
Applications
- Computers and peripherals
- Digital cameras
- Mobile phones
- DVD/Media Players
- MP3/Multimedia players
- A-V Equipment
- External storage
- DSL Modems
- Set top boxes
- Docking systems V18 C001 Product Family Size Working DC Voltage Capacitance in pF* * Part numbers use “R” to denote decimal point for decimal values of pico farads. TVSA 04 Packaging
- Size 0201: 15,000 pieces per reel - EIA (EIAJ)
- Size 0402: 10,000 pieces per reel - EIA (EIAJ) Surface Mount Device 1 2 Equivalent Circuits Specifications Part Stand-Off Breakdown Clamping Voltage Capacitance ESD Leakage Current Number Size Voltage Voltage At I peak = 1A pF Air/Contact (kV) (typical) TVSA02V05C004 0201 5 10 17 4 15/8 < 10nA TVSA04V05C006 0402 5 10 17 6 15/8 < 10nA Stand-off Voltage - Maximum DC operating voltage the diode can maintain and not exceed 1mA leakage current. Breakdown Voltage - Measured at any I/O pin to ground at 1mA DC current. Clamping Voltage - Maximum peak voltage across the diode with 8/20ms waveform and 1A pulse current. Capacitance - Device capacitance measured with zero volt bias at 1MHz. ESD Air/Contact - Voltages tested to IEC 61000-4-2.
1000 Eaton Boulevard
Cleveland, OH 44122 United States www.eaton.com/electronics © 2017 Eaton All Rights Reserved Printed in USA Publication No. DS4072 BU-SB13279 June 2017 Eaton is a registered trademark. All other trademarks are property of their respective owners. Life Support Policy: Eaton does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. Eaton reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Eaton also reserves the right to change or update, without notice, any technical information contained in this bulletin. Technical Data DS4072 Effective June 2017 TVSA Transient voltage ESD suppressor Dimensions - mm W H L C Size LW HC c b b d a Recommended Pad Layout - mm (in) Size ba cd 0201 0.23 0.30 0.45 0.83 0402 0.51 0.61 0.51 1.70 Tape Packaging Specifications - mm
0201 Carrier Dimensions
0402 Carrier Dimensions
Time (seconds) Temperature (°C) Soldering Recommendations
- Compatible with lead and lead-free solder reflow processes
- Peak reflow temperatures and durations: - IR Reflow = 260°C max for 30 sec. max. - Wave Solder = 260°C max. for 10 sec. max.
- Recommended IR Reflow Profile: