DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

  • Protection for the following IEC Standards: IEC61000−4−2 Level 4: ±30 kV Contact Discharge IEC61000−4−5 (Lightning) 40 A (8/20 /C0109s)
  • These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant MAXIMUM RATINGS Rating Symbol Value Unit IEC 61000−4−2 (ESD) Contact Air ±30 ±30 kV Operating Junction and Storage Temperature Range TJ, Tstg −65 to +150 °C Maximum Peak Pulse Current 8/20 /C0109s @ TA = 25°C IPP 40 A Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. This document contains information on a product under development. ON Semiconductor reserves the right to change or discontinue this product without notice. Device Package Shipping †

ORDERING INFORMATION

http://onsemi.com †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification s Brochure, BRD8011/D. TVS8501V12MUT5G UDFN2 (Pb−Free) 8000 / Tape & Reel MARKING DIAGRAM Cathode Anode UDFN2 CASE 517CZ XXM XX = Specific Device Code M = Date Code

http://onsemi.com

ELECTRICAL CHARACTERISTICS

(TA = 25°C unless otherwise noted) Symbol Parameter IPP Maximum Reverse Peak Pulse Current VC Clamping Voltage @ IPP VRWM Working Peak Reverse Voltage IR Maximum Reverse Leakage Current @ VRWM VBR Breakdown Voltage @ IT IT Test Current *See Application Note AND8308/D for detailed explanations of datasheet parameters. Uni−Directional TVS IPP IF V I IRIT VRWMVC VBR VF ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise specified) Parameter Symbol Conditions Min Typ Max Unit Reverse Working Voltage VRWM 12 V Breakdown Voltage (Note 1) VBR IT = 1 mA 13 V Reverse Leakage Current IR VRWM = 12 V 1.0 /C0109A Clamping Voltage (Note 2) VC IPP = 40 A 23 V Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 1. Breakdown voltage is tested from pin 1 to 2 and pin 2 to 1. 2. Non−repetitive current pulse at T A = 25°C, per IEC61000−4−5 waveform. Figure 1. TLP I−V Curve

http://onsemi.com PACKAGE DIMENSIONS UDFN2 1.6x1.0, 1.1P CASE 517CZ ISSUE A NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. ÉÉ ÉÉ A B E D BOTTOM VIEW b 2X 0.08 C PIN ONE REFERENCE TOP VIEW2X 0.08 C A 0.05 C 0.05 C C SEATING PLANESIDE VIEW L DIM MIN MAX MILLIMETERS A 0.45 0.55 A1 −−− 0.05 b 0.85 0.95 D 1.60 BSC E 1.00 BSC e 1.10 BSC L 0.35 0.45 0.58 DIMENSIONS: MILLIMETERS 1.00 *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. SOLDERING FOOTPRINT* e/2 e RECOMMENDED AM0.07 B C AM0.07 B C 1.70 ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a numb er of patents, trademarks, reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 TVS8501V12/D LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative