TVS-P6KE

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

Features

passivated chip junction in DO-15 Package 600W surge capability at 10/1000 s wave formμ Excellent clamping capability Low zener impedance Fast response time: typically less than 1.0ps from 0 Volts to B min. V Typical IR less than 1 A above 10Vμ High temperature soldering guaranteed: 265°C/10 seconds/.375", (9.5mm) lead length, 5lbs., (2.3kg) tension Pb-free plated P6KE(600W) Series Mechanical Data Case: JEDEC DO-15 Molded plastic Terminals: Solderable per MIL-STD-750,Method 2026 Polarity: Color band denotes cathode except Bipolar AnyMounting Position: 0.015 ounce, 0.4 gramsWeight: Devices For Bipolar Application For Bidirectional use C or CA Suffix for types P6KE6.8 thru types P6KE600 (e.g. P6KE6.8C , P6KE600CA) Electrical characteristics apply in both directions Maximum Ratings And Characteristics Ratings at 25 ambient temperature unless otherwise specified.℃ Notes : 1.Non-repetitive current pulse , per Fig. 3 and derated above T = 25 per Fig. 2 .A ℃ 2.Mounted on Copper Pad area of 1.6×1.6" (40×40mm) per Fig. 5 3.8.3ms single half sine-wave , or equivalent square wave, Duty cycle = 4 pulses per minutes maximum. Peak Forward Surge Current,8.3ms Single Half Sine-Wave Superimposed on Rated Load,(JEDEC Method) (Note3) Operating junction and Storage Temperature Range RATING SYMBOL VALUE UNITS PPPM IFSM T, TJS T G Minimum 600 -55 to +175 100 W atts Amps PM(AV) Watts Peak Pulse Power Dissipation at T 25 TAP == ℃, ()1ms Note Steady State Power Dissipation at T LeadL =75 ℃, ..lengths 375 9 5mm Note 2",( ) ( ) REV 2016 08 10

/UNI77ac/UNI96f7/UNI7535/UNI5b50 SPSEMI www.spsemi.cn Page 2 of 6 Dimensions (DO-15) DO-204AC(DO-15) Dimensions in inches and(millimeters) 1.0 25.4() MIN. 0.300 7 6(.) 0.230 5 8(.) 1.0 25.4() MIN. 0.034 0.86() 0.028 0.71() 0.140 3 6(.) 0.104 2 6(.) DIA.DIA. P6KE6.8A P6KE7.5A P6KE8.2A P6KE9.1A P6KE10A P6KE1 1A P6KE12A P6KE13A P6KE15A P6KE16A P6KE18A P6KE20A P6KE22A P6KE24A P6KE27A P6KE30A P6KE33A P6KE36A P6KE39A P6KE43A P6KE47A P6KE51A P6KE Part Number Reverse Stand-Off Voltage V (V)RWM Breakdown Voltage @IT V (V)Min.BR Breakdown Voltage @IT V (V)Max.BR Tes t Current IT(mA) Maximum Clamping Voltage @Ipp Vc(V) Peak Pulse Current Ipp(A) Reverse Leakage @VRWM I( A )RUNI-Polar BI-Polar

Electrical Characteristics

TABLE1“ ”Stand for commonly used models* P6KE6.8CA P6KE7.5CA P6KE8.2CA P6KE9.1CA P6KE10CA P6KE1 1CA P6KE12CA P6KE13CA P6KE15CA P6KE16CA P6KE18CA P6KE20CA P6KE22CA P6KE24CA P6KE27CA P6KE30CA P6KE33CA P6KE36CA P6KE39CA P6KE43CA P6KE47CA P6KE51CA 5.80 6.40 7.02 7.78 8.55 9.40 10.20 .10 12.80 13.60 15.30 17.10 18.80 20.50 23.10 25.60 28.20 30.80 33.30 36.80 40.20 43.60 6.45 7.13 7.79 8.65 9.50 10.50 11.40 12.40 14.30 15.20 17.10 19.00 20.90 22.80 25.70 28.50 31.40 34.20 37.10 40.90 44.70 48.50 7.14 7.88 8.61 9.55 10.50 11.60 12.60 13.70 15.80 16.80 18.90 21.00 23.10 25.20 28.40 31.50 34.70 37.80 41.00 45.20 49.40 53.60 10.5 11.3 12.1 13.4 14.5 15.6 16.7 18.2 21.2 22.5 25.2 27.7 30.6 33.2 37.5 41.4 45.7 49.9 53.9 59.3 64.8 70.1 58.1 54.0 50.4 45.5 42.1 39.1 36.5 33.5 28.8 27.1 24.2 22.0 19.9 18.4 16.3 14.7 13.3 12.2 11.3 10.3 9.4 8.7 600 400 200 Notes : 1.For bidirectional type having V of 10 volts and less, the I limit is double RWM R Fo r parts with A , the V is ± 5%2. BR .. . P6KE(600W) Series μ REV 2016 08 10

/UNI77ac/UNI96f7/UNI7535/UNI5b50 SPSEMI www.spsemi.cn Page 3 of 6 P6KE56A P6KE62A P6KE68A P6KE75A P6KE82A P6KE91A P6KE100A P6KE1 10A P6KE120A P6KE130A P6KE150A P6KE160A P6KE170A P6KE180A P6KE200A P6KE220A P6KE250A P6KE300A P6KE350A P6KE400A P6KE440A P6KE480A P6KE510A P6KE530A P6KE540A P6KE550A P6KE600A P6KE Part Number Reverse Stand-Off Voltage V (V) RW M Breakdown V oltage @IT V (V)Min.BR Breakdown V oltage @IT V (V)Max.BR Te st Current IT(mA) Maximum Clamping Voltage @Ipp Vc(V) Peak Pulse Current Ipp(A) Reverse Leakage @VRW M A )RUNI-Polar BI-Polar Electrical Characteristics T ABLE1“ ”Stand for commonly used models* P6KE56CA P6KE62CA P6KE68CA P6KE75CA P6KE82CA P6KE91CA P6KE100CA P6KE1 10CA P6KE120CA P6KE130CA P6KE150CA P6KE160CA P6KE170CA P6KE180CA P6KE200CA P6KE220CA P6KE250CA P6KE300CA P6KE350CA P6KE400CA P6KE440CA P6KE480CA P6KE510CA P6KE530CA P6KE540CA P6KE550CA P6KE600CA 47.80 53.00 58.10 64.10 70.10 77.80 85.50 94.00 102.00 111.00 128.00 136.00 145.00 154.00 171.00 185.00 214.00 256.00 300.00 342.00 376.00 408.00 434.00 450.00 459.00 467.00 512.00 53.20 58.90 64.60 71.30 77.90 86.50 95.00 105.00 114.00 124.00 143.00 152.00 162.00 171.00 190.00 209.00 237.00 285.00 332.00 380.00 418.00 456.00 485.00 503.50 513.00 522.50 570.00 58.80 65.10 71.40 78.80 86.10 95.50 105.00 116.00 126.00 137.00 158.00 168.00 179.00 189.00 210.00 231.00 263.00 315.00 368.00 420.00 462.00 504.00 535.00 556.50 567.00 577.50 630.00 77.0 85.0 92.0 103.0 113.0 125.0 137.0 152.0 165.0 179.0 207.0 219.0 234.0 246.0 274.0 328.0 344.0 414.0 482.0 548.0 602.0 658.0 698.0 725.0 740.0 760.0 828.0 7.9 7.2 6.6 5.9 5.4 4.9 4.5 4.0 3.7 3.4 2.9 2.8 2.6 2.5 2.2 1.9 1.8 1.5 1.3 1.1 1.0 0.9 0.9 0.8 0.8 0.8 0.75 Notes 1.For bidirectional type having V of 10 volts and less, the I limit is doubleRW M R F or parts with A , the V is ± 5%2. BR P6KE(600W) Series * * REV 2016 08 10 μ

/UNI77ac/UNI96f7/UNI7535/UNI5b50 SPSEMI Rating And Characteristic Curves www.spsemi.cn Page 4 of 6 Fig.3 Pulse Waverform Fig.4 Typ.Junction Capacitance Uni-Directional Fig.5 Steady State Power Dissipation Derating Curve 00 1.0 2.0 4.03.0 10/1000 s Waveformμ as defined by R.E.A Half V alue IPPM tr=10 sμ Peak Value IPPM T= 2 5J ℃ Pulse width(td) is defined ad the Point where the Peak Current Decays to 50% of I PPM 100 150 I -Peak Pulse Current(%) PPM t-Time(mS) Junction Capacitance(pF) 1 10 200 100 1000 6000 V -Reverse Stand-Off Voltage(V)WM td 1001 Measured at Zero Bias Fig.6 Maximum Non-Repetitive Peak Forward Surge Current Uni-Directional Only I -Peak Forward Surge Current(A) FSM 1 10 100 100 200 Number of Cycles at 60H Z T= Tm a xJJ 8.3mS single half sine-wave (JEDEC Method) 5 50 .. . P6KE(600W) Series Fig.1 Peak Pulse Power Rating Curve Fig.2 Pulse Derating Curve T --Ambient Temperature( )A ℃ 100 125 150 17575502500 100 120 Peak Pulse Power(P )or Current(I ) PP PPM Derating in Percentage% P -Peak Pulse Power (kW) PPM 0.1μs 10μs 10ms 0.1 100 td - P ulse Width (sec.) 1.0μs 100μs 1.0ms T= 2 5J ℃ f=1.0MHz Vsig=50mVp-p 00 50 75 150100 Steady State Power Dissipation (W) T - Lead Temperature (°C)L 25 125 175 200 L = 0.375" (9.5 mm) Lead Lengths Measrued at Stand-Of f Voltage V WM REV 2016 08 10 Non-Repetitive Pulse Waveform shown in Fig. 3 TA = 25 °C

/UNI77ac/UNI96f7/UNI7535/UNI5b50 SPSEMI Marking Code Recommended Soldering Conditions Recommended Conditions Reflow Soldering ts tP tL Ti me time to peak temperature (t 25 to peak)℃ T emperature T (min)s T (max)s TL TP Preheat Ramp-down Ramp-up Critical Zone Tt o TLP Re”ow Condition Pb-Free assembly (see Fig.1) Pre Heat -Temperature Min(T ) s(min) emperature Max(T ) s(max) ime(Min to Max)(t ) s A verage ramp up rate (Liquidus Temp(T ) to peak)L T to T -Ramp-up Rates(max) L Re”ow emperature(T )(Liquidus)L emperature(t )L Peak Temp(T )P T ime within 5 of actual Peak Temp(t )℃ P Ramp-down Rate Time 25 to Peak Temp(T )℃ P Do not exceed +150 ℃ +200 ℃ 60-180secs 3 /sec.Max.℃ 3 /sec.Max.℃ +217 ℃ 60-150secs +260(+0/-5) ℃ 30 secs.Max. 6 /sec.Max.℃ 8 min.Max. +260 ℃Cathode Band P6KE6.8A ** Marking Code Logo Date Code P6KE6.8CA ** Marking Code Logo Date Code P6KE(600W) Series REV 2016 08 10

瞬 雷 电 子 P6KE(600W) Series