TVS-20KPA

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

Features

Glass passivated chip junction 20000W Peak Pulse Power capability on 10/1000 s waveformμ Excellent clamping capability Repetition rate (duty cycle):0.05% Low incremental surge resistance Fast response time: typically less than 1.0ps from 0 Volts to B min.V High temperature soldering guaranteed: 265°C/10 seconds/.375", (9.5mm) lead length, 5lbs., (2.3kg) tension Pb-free plated 20KP A(20KW) Series Mechanical Data Case: Molded plastic over glass passivated junction Terminals: Solderable per MIL-STD-750,Method 2026 Polarity: Color band denotes positive end (cathode) except Bipolar AnyMounting Position: 0.07 ounce, 2.5 gramsWeight: Devices For Bipolar Application For Bidirectional use C or CA Suffix for types 20KPA20 thru types 20KPA300 (e.g. 20KPA20C , 20KPA300CA) Electrical characteristics apply in both directions Maximum Ratings And Characteristics Ratings at 25 ambient temperature unless otherwise specified.℃ Operating junction and Storage Temperature Range RATING SYMBOL VALUE UNITS PPPM IFSM TJS T G Minimum 20000 400 W atts Amps PM(A V) W atts Peak Pulse Power Dissipation on 10/1000 s waveformμ Steady State Power Dissipation at T LeadL =75 ℃, ..lengths 375 9 5mm",( Peak Pulse Current of on 10/1000 s waveformμ IPPM SEE T ABLE 1 Amps -55 to +175 REV 2016 08 10 ℃Peak Forward Surge Current,1/20 second / 25 (JEDEC Method)

/UNI77ac/UNI96f7/UNI7535/UNI5b50 SPSEMI www.spsemi.cn Page 2 of 5 Dimensions Case Style P600 Dimensions in inches and(millimeters) 1.0 25.4() MIN. 0.360 9 1(.) 0.340 8 6(.) 1.0 25.4() MIN. 0.052 1 32(. ) 0.048 1 22(. ) 0.360 9 1(.) 0.340 8 6(.) DIA.DIA. 20KP A20A 20KP A24A 20KPA26A 20KPA28A 20KPA30A 20KPA32A 20KPA34A 20KPA36A 20KPA40A 20KPA44A 20KPA48A 20KPA52A 20KPA56A 20KPA60A 20KPA64A 20KPA68A 20KPA72A 20KPA80A 20KPA88A 20KPA96A 20KPA104A 20KPA112A 20KPA Part Number Reverse Stand-Off Voltage V (V) RWM Breakdown Voltage @IT V (V)Min.BR Breakdown Voltage @IT V (V)Max.BR Tes t Current IT(mA) Maximum Clamping Voltage @Ipp Vc(V) Peak Pulse Current Ipp(A) Reverse Leakage @VRWM I( A )RUNI-Polar BI-Polar

Electrical Characteristics

22.20 26.67 28.90 31.10 33.30 35.60 37.84 39.3 44.4 48.8 53.2 57.6 62.4 66.8 71.2 75.6 80.0 88.8 97.6 106.8 115.6 124.4 24.50 29.49 31.90 34.40 36.90 39.10 41.53 44.1 49.1 54.0 58.8 63.6 68.8 74.0 78.8 83.6 88.4 98.0 107.6 118.0 127.6 137.6 36.8 41.2 44.7 48.0 51.5 54.3 57.5 61.5 67.8 72.7 79.4 85.8 92.6 97.6 104.0 110.0 116.0 130.0 142.0 155.0 168.0 182.0 548.9 490.3 451.9 420.8 392.2 372.0 351.3 328.5 297.9 277.9 254.4 235.4 218.1 207.0 194.2 183.6 174.1 155.4 142.3 130.3 120.2 111.0 5000 5000 2000 1000 250 150 Notes : 1.For bidirectional type having V of 10 volts and less, the I limit is double RWM R Fo r parts with A , the V is ± 5%2. BR .. . “ ”Stand for commonly used models* 20KP A(20KW) Series REV 2016 08 10 μ

/UNI77ac/UNI96f7/UNI7535/UNI5b50 SPSEMI www .spsemi.cn Page 3 of 5 20KP A120A 20KPA132A 20KPA144A 20KPA160A 20KPA172A 20KPA180A 20KPA192A 20KPA204A 20KPA216A 20KPA232A 20KPA240A 20KPA256A 20KPA280A 20KPA300A 20KPA Part Number Reverse Stand-Off Voltage V (V) RW M Breakdown V oltage @IT V (V)Min.BR Breakdown V oltage @IT V (V)Max.BR Te st Current IT(mA) Maximum Clamping Voltage @Ipp Vc(V) Peak Pulse Current Ipp(A) Reverse Leakage @VRW M A )RUNI-Polar BI-Polar Electrical Characteristics T ABLE1 20KP A120CA 20KPA132CA 20KPA144CA 20KPA160CA 20KPA172CA 20KPA180CA 20KPA192CA 20KPA204CA 20KPA216CA 20KPA232CA 20KPA240CA 20KPA256CA 20KPA280CA 20KPA300CA 120 132 144 160 172 180 192 204 216 232 240 256 280 300 133.2 146.8 160.0 177.6 191.2 200.0 213.2 226.8 240.0 257.6 266.8 284.4 311.2 333.2 147.2 162.4 176.8 196.4 211.2 221.2 235.6 250.8 265.2 284.8 294.8 314.4 344.0 368.4 194.0 213.0 232.0 258.0 277.0 291.0 309.0 329.0 348.0 374.0 387.0 412.0 451.0 483.0 104.1 94.8 87.1 78.3 72.9 69.4 65.4 61.4 58.0 54.0 52.2 49.0 44.8 41.8 Notes : 1.For bidirectional type having V of 10 volts and less, the I limit is double RW M R F or parts with A , the V is ± 5%2. BR ”Stand for commonly used models* 20KP A(20KW) Series Rating And Characteristic Curves Fig.2 Pulse Derating Curve T --Ambient Temperature( )A ℃ 100 125 150 17575502500 100 120 Peak Pulse Power(P )or Current(I ) PP PPM Derating in Percentage% Fig.1 Peak Pulse Power Rating Curve P -Peak Pulse Power (kW) PPM 100 1000 t d - Pulse Width (sec.) 1.0μs 10μs 100μs 1.0ms REV 2016 08 10 μ

/UNI77ac/UNI96f7/UNI7535/UNI5b50 SPSEMI Rating And Characteristic Curves www.spsemi.cn Page 4 of 5 Fig.3 Pulse Waverform 00 1.0 2.0 4.03.0 10/1000 s Waveformμ as defined by R.E.A Half Value I PPM tr=10 sμ Peak Value I PPM T= 2 5 J Pulse width(td) is defined ad the Point where the Peak Current Decays to 50% of I PPM 100 150 I -Peak Pulse Current(%) PPM t-Time(mS) td I -Peak Forward Surge Current(A) FSM 1 10 100 100 350 450 Number of Cycles at 60H Z 5 50 .. . Fig.4 Typical Junction Capacitance C -Junction Capacitance(pF) J 0.0 50.0 100 1000 V -Reverse Breakdown Voltage(V) BR 10000 Fig.5 Steady State Power Dissipation Derating Curve 00 50 75 150100 1.0 2.0 P Steady State Power Dissipation (W) M(AV) T - Lead Temperature (°C) L 25 125 175 200 3.0 8.0 Lead Lengths 1.6×1.6×0.040" (40×40×1mm) Copper Heat Sirks 4.0 5.0 6.0 7.0 60H Z Resistive or Inductive Load 150 250 Fig.6 Maximum Non-Repetitive Peak Forward Surge Current 400 300 200 TJ=25 ℃ f=1.0MH Z Vsig=50mVp-p Uni-Directional V=0V Bi-Directional V=0V Uni-Directional @V R Bi-Directional @V R 100000 20KPA(20KW) Series Recommended Soldering Conditions Recommended Conditions Reflow Soldering t s t P t L Time time to peak temperature (t 25 to peak)℃ Temperature T (min) s T (max) s T L T P Preheat Ramp-down Ramp-up Critical Zone Tt o T LP Re”ow Condition Pb-Free assembly (see Fig.1) Pre Heat -Temperature Min(T ) s(min) -Temperature Max(T ) s(max) -Time(Min to Max)(t ) s Average ramp up rate (Liquidus Temp(T ) to peak) L T to T -Ramp-up Rate s(max) L Re”ow -Temperature(T )(Liquidus) L -Temperature(t ) L Peak Temp(T ) P Time within 5 of actual Peak Temp(t )℃ P Ramp-down Rate Time 25 to Peak Temp(T )℃ P Do not exceed +150 ℃ +200 ℃ 60-180secs 3 /sec.Max.℃ 3 /sec.Max.℃ +217 ℃ 60-150secs +260(+0/-5) ℃ 30 secs.Max. 6 /sec.Max.℃ 8 min.Max. +260 ℃ REV 2016 08 10

/UNI77ac/UNI96f7/UNI7535/UNI5b50 SPSEMI . www .spsemi.cn Page 5 of 5 Marking Code Cathode Band 20KP A17A ** Marking Code Logo Date Code 20KP A17CA ** Marking Code Logo Date Code 20KP A(20KW) Series REV 2016 08 10 Packaging L W H B T E E A Z ± º5 Dimensions in millimeters BA Z ET L1-L2 L W H Quantity