TVD TRANSKO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 2

Technical content

Transko Electronics, Inc. 3981 E. Miraloma Ave. CA 92806 USA Tel: 714-528-8080 Fax: 714-528-8017 Website: www.transko.com E-mail: sales@transko.com Transko Electronics, Inc. 3981 E. Miraloma Ave. Anaheim, CA 92806 USA Tel: 714-528-8000 Fax: 714-528-8017 Website: www.transko.com E-mail: sales@transko.com RoHS Compliant Rev. 3: 06-16-2020 DUAL FREQUENCY OUTPUT CERAMIC SMD VCXO (7.0 x 5.0mm)

FEATURES

  • Designed specifically for Digital Video application
  • 2 user- selectable output frequencies: 148.3516MHz, 148.500MHz
  • High reliability and low aging
  • Available CMOS,LVDS, and LVPECL outputs
  • 3.3V and 2.5V supply options Transko Electronics, Inc reserves the right to make changes to the product (s), service (s), and specification (s) described herein without notice. See “Terms of Sale” for details on our website. ■ SPECIFICATION PARAMETER MIN. TYP. MAX. UNIT NOTE FREQUENCY 148.3516MHz, 148.500MHz FREQUENCY STABILITY ±10* ±50 ±100 ppm See P/N guide for other options OPERATING TEMPERATURE RANGE -40 85 °C See P/N guide for other options STORAGE TEMPERATURE RANGE -55 125 °C SUPPLY VOLTAGE ±10% VDD = 2.5VDC 2.375 2.500 2.625 V VDD = 3.3VDC 2.970 3.300 3.630 V SUPPLY CURRENT CMOS 20 45 mA (VDD = 2.5VDC, 3.3VDC) LVDS 23 45 mA LVPECL 54 60 mA OUTPUT LOAD CMOS 15 pF LVDS 100 Ω Output - Complementary Output LVPECL 50 Ω into VDD - 2VDC LEVEL CMOS (VOH) 0.9 x VDD V CMOS (VOL) 0.1 x VDD V LVDS (VOH) 1.4 1.6 V LVDS (VOL) 0.9 1.1 V LVPECL (VOH) VDD – 1.03V VDD – 0.60V V LVPECL (VOL) VDD – 1.85V VDD – 1.62V V SYMMETRY (DUTY CYCLE) CMOS 45 55 % LVDS 45 55 % LVPECL 45 55 % RISE AND FALL TIME (Tr/Tf) CMOS 1.0 3.0 nS LVDS 0.25 0.6 nS LVPECL 0.25 0.6 nS START-UP TIME 2.0 3.0 mS STAND-BY VOLTAGE ENABLE (VIH) 0.7 x VDD V DISABLE (VIL) 0.3 x VDD V ENABLE DELAY TIME 100 nS DISABLE DELAY TIME 100 nS FREQUENCY DEVIATION ±50 ppm See P/N guide for other options CONTROL VOLTAGE 0.00 VDD V SLOPE Positive LINEARITY 10 % MODULATION BANDWIDTH 10 kHz INPUT IMPEDANCE 100 kΩ AGING per 1year ±3.0 ppm @ 25°C ±3°C per 10years ±5.0 ppm PHASE JITTER RMS 0.60 1.50 pS @ 12kHz ~ 20MHz PERIOD JITTER 2.0 3.0 pS * Available in selected operating temperature range

Transko Electronics, Inc. 3981 E. Miraloma Ave. CA 92806 USA Tel: 714-528-8080 Fax: 714-528-8017 Website: www.transko.com E-mail: sales@transko.com Transko Electronics, Inc. 3981 E. Miraloma Ave. Anaheim, CA 92806 USA Tel: 714-528-8000 Fax: 714-528-8017 Website: www.transko.com E-mail: sales@transko.com RoHS Compliant Rev. 3: 06-16-2020 Transko Electronics, Inc reserves the right to make changes to the product (s), service (s), and specification (s) described herein without notice. See “Terms of Sale” for details on our website. ■ Phase Noise & RMS Jitter measurement NO 10Hz 100Hz 1kHz 10kHz 100kHz 1MHz 5MHz RMS Jitter Note: Consult factory for detail Soldering 255 ±5°C 150 ±5°C Pre-heating <10 Sec <120 Sec 170 ±5°C ■ PART NUMBERING GUIDE ■ REFLOW PROFILE Unit :mm 1.8 2.0 0.54 2.4 ■ SOLDER PATTERN ■ PACKAGE DIMENSIONS BOTTOM TOP SIDE Unit:mm ** LVDS/LVPECL only Pin Configuration

1 Vcon

2 *Fsel

3 Ground

4 Output

5 **C.output

6 VDD

  • Fsel Fsel Corresponding Frequency GND 148.3516MHz VDD 148.500MHz 1.9 2.54 2.54 5.0 7.0 TRANSKO Part Number Frequency 1 3 4 6 2.6 6 4 3 1 1.4 ■ 27MHz 3.3V VCXO Temperature Test Data (-40°C ~ 85°C) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 Product series Output P: PECL L: LVDS H: CMOS Tape and Reel TR: 1000/reel Blank: Cut tape P TVD C TR 50 33 HM Operating Temperature A: -55 B: -50 C: -40 D: -35 E: -30 F: -20 G: -10 H: 0 J: 50 K: 60 M: 70 N: 75 P: 80 Q: 85 R: 90 S: 100 T: 105 U: 125 X:custom Stability 00: ± 100ppm 50: ± 50ppm 25: ± 25ppm 15: ± 15ppm 10: ± 10ppm XX: Two digit for Stability Pullability A: ±50ppm B: ±75ppm C: ±100ppm Supply Voltage 25: 2.5 Volt 33: 3.3 Volt