TV50C510J-G

TV50C110-G COMCHIP | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

Features

• Glass passivated chip. - Low leakage. - Excellent clamping capability. - Very fast response time. Mechanical Data - 5000W peak pulse power capability with a 10/1000µs waveform, repetitive rate (duty cycle):0.01% - Uni and Bidirectional unit. - Case: DO-214AB/SMC molded plastic. - Lead: Solderable per MIL-STD-750, method 2026. - Weight: (approx.)0.230 gram - Epoxy: UL 94V-0 rate flame retardant - Polarity: Color band denoted cathode end except bipolar. R - UL recognized file # E349157 - Mounting position: Any Maximum Ratings and Electrical CharacteristicsRating at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Notes: 1. Non-repetitive current pulse, per Fig.5 and derated above TA=25°C, per Fig.1 2. Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum. 3. VF<3.5V for devices of VBR<200V and VF<5.0V for devices of VBR>201V Parameter Symbol Value Units Peak power dissipation with a 10/1000μs waveform (Note 1) waveform Peak pulse current 10/1000μs with a (Note 1) Maximum instantaneous forward voltage at 100A for unidirectional only (Note 3) Operation junction and storage temperature range PPP IPP PD VF TJ TSTG, 5000 See Next Table 6.5 3.5/5.0 -55 to +150 W A W IFSM 300 A V Power dissipation on infinite heatsink at TL=75°C Peak forward surge current, 8.3ms single half sine-wave unidirectional only (Note 2) Dimensions in inches and (millimeter) SMC/DO-214AB 0.245(6.15) 0.220(5.52) 0.126(3.16) 0.114(2.86) 0.320(8.02) 0.006(0.15) 0.008(0.20) 0.000(0.00) 0.060(1.51) 0.030(0.75) 0.103(2.59) 0.079(1.98) 0.280(7.02) 0.260(6.52) Uni-directionalBi-directional Circuit Diagram

RATING AND CHARACTERISTIC CURVES (TV50C110-G thru. TV50C441-G) Pulse Width, td (μs) 1001010.1 Fig.4 - Peak Pulse Power Rating Curve 0.1 100 Peak Power, (kW) Ambient Temperature, TA (°C) Fig.1 - Pulse Derating Curve 140 7550 100 175150 100001000 25 125 100 120 Lead Temperature, TL (°C) Fig.3 - Steady State Power Derating Curve Steady State Power Dissipation, (W) 25 75 100 175 50 125 150 Number of Cycles at 60Hz Peak Forward Surge Current, (A) 350 10 100 200 100 150 300 250 8.3ms single half sine-wave (JEDEC method) TJ=TJ max. Fig.2 - Maximum Non-Repetitive Surge Current Fig.6 - Typical Junction Capacitance Junction Capacitance, CJ (pF) 100 10 100 10001 Reverse Breakdown Voltage, VBR (V) 10000 Bi-directional @zero bias Uni-directional@zero bias Uni-directional @VRWM Bi-directional @ VRWM TJ=25°C f=1.0MHz 1000 Fig.5 - Pulse Waveforem Peak Pulse Current, (%) Time, (ms) 0 1.0 4.0 100 3.02.0 Peak value Tr=10μs Half Value= Ipp TJ = 25°C td Pluse width(td) is defined as the point where the peak current decays to 50% of Ipp 10 / 1000 waveform μsec. as defined by R.E.A. (Ipp) Peak Pulse Derating in Percentage of Peak Power or Current, (%) Page 2 Comchip Technology CO., LTD. SMD Transient Voltage Suppressor Company reserves the right to improve product design , functions and reliability without notice. QW-BTV14 REV:F

IPP (A) Maximum Clamping Voltage VC (V) Marking Part No. Reverse Leakage IR (uA) Peak Voltage VRWM (V) TV50C110J(B)-G TV50C120J(B)-G TV50C130J(B)-G TV50C140J(B)-G TV50C360J(B)-G TV50C430J(B)-G TV50C450J(B)-G TV50C400J(B)-G TV50C260J(B)-G TV50C280J(B)-G TV50C300J(B)-G TV50C330J(B)-G TV50C480J(B)-G TV50C190J(B)-G TV50C200J(B)-G TV50C220J(B)-G TV50C240J(B)-G TV50C150J(B)-G TV50C160J(B)-G TV50C170J(B)-G TV50C180J(B)-G (V) (V) (mA) Breakdown voltage Maximum @VRWM Working Reverse Current Reverse @IPP VBR @ IT Code Device Min. ITMax. TV50C510J(B)-G TV50C540J(B)-G TV50C580J(B)-G TV50C600J(B)-G TV50C640J(B)-G TV50C700J(B)-G TV50C750J(B)-G TV50C780J(B)-G TV50C800J(B)-G TV50C850J(B)-G TV50C900J(B)-G TV50C101J(B)-G TV50C111J(B)-G TV50C121J(B)-G TV50C131J(B)-G TV50C141J(B)-G TV50C151J(B)-G TV50C161J(B)-G TV50C171J(B)-G 12.20 13.50 10 13.30 14.70 10 14.40 15.90 10 15.60 17.20 10 16.70 18.50 1 17.80 19.70 1 18.90 20.90 1 20.00 22.10 1 21.10 23.30 1 22.20 24.50 1 24.40 26.90 1 26.70 29.50 1 28.90 31.90 1 31.10 34.40 1 33.30 36.80 1 36.70 40.60 1 40.00 44.20 1 44.40 49.10 1 47.80 52.80 1 50.00 55.30 1 53.30 58.90 1 56.70 62.70 1 60.00 66.30 1 64.40 71.20 1 66.70 73.70 1 71.10 78.60 1 77.80 86.00 1 83.30 92.10 1 86.70 95.80 1 88.80 97.60 1 94.40 104.0 1 100.0 111.0 1 111.0 123.0 1 122.0 135.0 1 133.0 147.0 1 144.0 159.0 1 155.0 171.0 1 167.0 185.0 1 178.0 197.0 1 189.0 209.0 1 800 800 500 200 100 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 19.0 20.0 22.0 24.0 26.0 28.0 30.0 33.0 36.0 40.0 43.0 45.0 48.0 51.0 54.0 58.0 60.0 64.0 70.0 75.0 78.0 80.0 85.0 90.0 100.0 110.0 120.0 130.0 140.0 150.0 160.0 170.0 18.2 19.9 21.5 23.2 24.4 26.0 27.6 29.2 30.8 32.4 35.5 38.9 42.1 45.4 48.4 53.3 58.1 64.5 69.4 72.7 77.4 82.4 87.1 93.6 96.8 103.0 113.0 121.0 126.0 129.6 137.0 146.0 162.0 177.0 193.0 209.0 226.8 243.0 259.0 275.0 274.7 251.3 232.6 215.5 204.9 192.3 181.2 171.2 162.4 154.3 140.8 128.5 118.8 110.1 103.3 93.8 86.1 77.5 72.0 68.8 64.6 60.7 57.4 53.4 51.7 48.5 44.2 41.3 39.7 38.6 36.5 34.2 30.9 28.2 25.9 23.9 22.0 20.6 19.3 18.2 5PDX 5PDZ 5PEE 5PEG 5PEK 5PEM 5PEP 5PER 5PET 5PEV 5PEX 5PEZ 5PFE 5PFG 5PFK 5PFM 5PFP 5PFR 5PFT 5PFV 5PFX 5PFZ 5PGE 5BDX 5BDZ 5BEE 5BEG 5BEK 5BEM 5BEP 5BER 5BET 5BEV 5BEX 5BEZ 5BFE 5BFG 5BFK 5BFM 5BFP 5BFR 5BFT 5BFV 5BFX 5BFZ 5BGE 5PGG 5PGK 5PGM 5PGP 5PGR 5PGT 5PGB 5PGV 5PGX 5PGZ 5PHE 5PHG 5BGG 5BGK 5BGM 5BGP 5BGR 5BGT 5BGB 5BGV 5BGX 5BGZ 5BHE 5BHG 5PHK 5BHK 5PHB 5PHM 5PHP 5PHR 5BHB 5BHM 5BHP 5BHR Page 3 Comchip Technology CO., LTD. SMD Transient Voltage Suppressor Company reserves the right to improve product design , functions and reliability without notice. QW-BTV14 REV:F

IPP (A) Maximum Clamping Voltage VC (V) Marking Part No. Reverse Leakage IR (uA) Peak Voltage VRWM (V) TV50C181J(B)-G TV50C191J(B)-G TV50C201J(B)-G TV50C221J(B)-G TV50C251J(B)-G TV50C301J(B)-G TV50C351J(B)-G TV50C401J(B)-G (V) (V) (mA) Breakdown voltage Note: 1) Suffix J denotes 5% tolerance devices. 2) Suffix B after part number to specify bi-directional devices. 3) For Bi-Directional devices having VR of 20 volts and under, the IR limit is double. Maximum @VRWM Working Reverse Current Reverse @IPP VBR @ IT Code Device Min. ITMax. 224.0 247.0 1 279.0 309.0 1 391.0 432.0 1 200.0 250.0 350.0 324.0 405.0 567.0 15.4 12.3 8.8 5PHW 5PHZ 5PJG 5BHW 5BHZ 5BJG 200.0 211.0 246.0 335.0 447.0 492.0 220.0 232.0 272.0 371.0 494.0 543.0 180.0 190.0 220.0 300.0 400.0 440.0 17.1 16.2 14.0 10.3 7.7 7.0 291.6 307.8 356.0 486.0 648.0 713.0 5PHT 5PHV 5PHX 5PJE 5PJK 5PJM 5BHT 5BHV 5BHX 5BJE 5BJK 5BJMTV50C441J(B)-G Comchip Technology CO., LTD. SMD Transient Voltage Suppressor Company reserves the right to improve product design , functions and reliability without notice. Page 4QW-BTV14 REV:F

(mm) (inch) 1.969 (min) DO-214AB (SMC) A SYMBOL (mm) E F P P0 P1 W W1 1.75 ± 0.10 0.069 ± 0.004 7.50 ± 0.10 0.295 ± 0.004 DO-214AB (SMC) o 120 Trailer Device Leader 10 pitches (min)10 pitches (min) D1 D2 D T C Direction of Feed Reel Taping Specification Index hole d E F B W P A Page 5 Comchip Technology CO., LTD. SMD Transient Voltage Suppressor Company reserves the right to improve product design , functions and reliability without notice. QW-BTV14 REV:F

1. XXXX : Marking code (see Page.3~4) Cathod Band2. : C D B A SIZE (inch) 0.320 (mm) 8.13

4.69 MAX

1.52 MIN

0.185 MAX

0.06 MIN

3.20 MIN 0.126 MIN B C D A DO-214AB(SMC) Suggested PAD Layout Case Type 3,000 REEL ( pcs ) Reel Size (inch) REEL PACK DO-214AB (SMC) Page 6 Comchip Technology CO., LTD. SMD Transient Voltage Suppressor Company reserves the right to improve product design , functions and reliability without notice. QW-BTV14 REV:F