TV30C5V0-G_12 COMCHIP | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

Features

-Ideally for surface mount applications. -Easy pick and place. -Plastic package has Underwriters Lab. flammability classification 94V-0. -Typical IR less than 1μA above 10V. -Fast response time: typically less than 1nS for uni-direction, less than 5nS for bi-direction, from 0V to BV min. -Use in sensitive electronic protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, automotive and telecommunication. Mechanical data -Case: JEDEC DO-214AB, molded plastic. -Terminals: solderable per MIL-STD-750, method 2026. -Polarity: Color band denotes cathode end. -Approx. weight: 0.21 grams TV30C5V0-G Thru. TV30C441-G Maximum Ratings and Electrical Characteristics Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeter) QW-BTV04 Notes: O 1. Non-repetitive current pulse, per Fig. 5 and derated above TA=25 C, per Fig. 1 2. Measured on 8.3 ms single half sine-wave or equivalent square wave,duty cycle=4 pulses per minute maximum. 3. VF<3.5V for devices of VBR<200V and VF<5.0V for devices of VBR>201V Comchip Technology CO., LTD. Peak power dissipation on 10/1000μS waveform (Note 1) Peak pulse current on 10/1000μS waveform (Note 1) O Steady state power dissipation at TL=75 C Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load, uni-directional only (Note 2) Maximum instantaneous forward voltage at 100A for uni-directional only (Note 3) Operating junction temperature Storage temperature range Value UnitsSymbolCharacteristics PPP IPP PD IFSM VF TJ TSTG 3000 See Next Table 6.0 300 3.5/5.0 -55 to +150 -55 to +150 W A W A V O C O C DO-214AB (SMC) 0.245(6.15) 0.220(5.52) 0.126(3.16) 0.22 (2.86) 0.320(8.02) 0.006(0.15) 0.008(0.20) 0.000(0.00) 0.060(1.51) 0.030(0.75) 0.103(2.59) 0.079(1.98) 0.280(7.02) 0.260(6.52) Rating at 25°C ambient temperature unless otherwise specified.

RATING AND CHARACTERISTIC CURVES (TV30C5V0-G Thru. TV30C441-G) Pulse Width,td ( μS ) 1001010.1 Fig.4 Peak Pulse Power Rating Curve 0.1 1.0 100 Peak Power, ( KW ) Ambient Temperature,TA ( O C ) Fig.1 Pulse Derating Curve 140 Time, (ms) Fig.5 Pulse Waveform 120 1 2 3 4 Fig.6 Typical Junction Capacitance Comchip Technology CO., LTD. Page 2 REV:F 50 100 175150 100 SMD Transient Voltage Suppressor 100001000 25 125 100 120 td Pulse width (td) is defined as the point where the peak current decay to 50% of IPP tr=10μS Peak value IPPM Half value IPP/2 10/1000μsec. Waveform as defined by R.E.A. Lead Temperature , TL ( O C ) Fig.3 Steady State Power Derating Curve Steady Power Dissipation, (W) 25 75 100 175 50 125 150 Number of Cycles at 60Hz Fig.2 Max. Non-Repetitive Surge Current Peak Forward Current , (A) 350 10 100 200 200 100 150 300 250 8.3mS single half sine-wave (JEDEC method) TJ=TJ , max. Peak Pulse Current , ( % ) Peak Pulse Derating in Percentage of Peak Power or Current, ( % ) TJ= 25 O C 10000 Junction Capacitance, (pF) 1000 100 10 100 10001 VBR, Reverse Breakdown Voltage (V) 100000 Bi-directional @zero bias Uni-directional @zero bias Uni-directional @VRWM Bi-directional @ VRWM TJ=25 f=1.0MHz O C

Comchip Technology CO., LTD. Page 3 REV:F SMD Transient Voltage Suppressor VRWM VBR Min. IT IFSM RI @VRWM (V) (V) (V) (mA) (A)@8.3mS (V) IPP (A) (uA) Uni Bi Absolute Maximum Rating (Ta= 25 O Part No Electrical Characteristic (Ta= 25 Max. VC Marking CodeVBR Max.

Comchip Technology CO., LTD. Page 4 REV:F SMD Transient Voltage Suppressor VRWM VBR Min. VBR Max. IT IFSM IR @V RWM (V) (V) (V) (mA) (A)@8.3mS (V) IPP (A) (uA) Uni Bi Part No Absolute Maximum Rating (Ta= 25 O C) Electrical Characteristic (Ta= 25 O Max. VC Marking Code

Comchip Technology CO., LTD. Page 5 REV:F SMD Transient Voltage Suppressor VRWM VBR Min. VBR Max. IT IFSM IR@VRWM (V) (V) (V) (mA) (A)@8.3mS (V) IPP(A) (uA) Uni Bi Part No. Absolute Maximum Rating (TA =25 O C) Electrical Characteristic (TA =25O Max VC Marking Code 1) Suffix K denotes 10% tolerance devices, J denotes 5% tolerance devices.suffix 2) Suffix B after part number to specify Bi-directional devices. 3) For Bi-Directional devices having VR of 10 volts and under, the IR limit is double. Note:

Comchip Technology CO., LTD. Page 6 REV:F SMD Transient Voltage Suppressor B C d D D2D1SYMBOL A (mm) (inch) 1.969 MIN. 4.00 ± 0.10 330 SYMBOL (mm) E F P P0 P1 W W1 1.75 ± 0.10 0.069 ± 0.004 7.50 ± 0.05 0.295 ± 0.002 o 120 Trailer Device Leader 10 pitches (min)10 pitches (min) D1 D2 D T C Direction of Feed Reel Taping Specification Index hole d E F B W P A DO-214AB (SMC) DO-214AB (SMC)

Comchip Technology CO., LTD. Page 7 REV:F SMD Transient Voltage Suppressor Marking Code C XXX 1. C: COMCHIP PKG SMCC 3. XXX: Marking code(see Page.3~5) 4. : Cathod Band A B C E DSIZE (inch) 0.244 (mm) 6.20 1.60 4.80 0.063 0.189 7.80 0.307 E 4.60 0.181 B C D A DO-214AB(SMC) Suggested PAD Layout 2. : Package Standard Packaging Case Type 3,000 REEL ( pcs ) Reel Size (inch) REEL PACK DO-214AB (SMC)