TSY-13LNB MINI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits Monolithic Amplifier The Big Deal

  • Very wideband, 30 MHz – 1 GHz
  • Low NF over entire frequency band, 1.2 dB
  • Low current and low voltage (2.7V and 7.7 mA)
  • Internal bypass switching Product Overview TSY-13LNB+ (RoHS compliant) is an advanced Low Voltage, Low Current, Low Noise wideband Bypass amplifier fabricated using GaAs E-PHEMT technology offering extremely high dynamic range over a broad frequency range. It has integrated switches enabling users to bypass the amplifier. TSY is enclosed in a 8-lead 2 x 2 mm MCLP package for good thermal performance Feature Advantages Ultra-wideband: 30 MHz – 1 GHz Ideal for a wide range of receiver applications including military, commercial wireless, and instrumentation. Low Voltage & Low Current 2.7V & 7.7 mA Ideal for Battery operates systems High IP3 26.4 dBm typ at 0.5 GHz Provides enhanced linearity over broad frequency range under high signal conditions. Internal bypass switch feature draws 0.2 mA during Bypass Prolongs battery life by switching to bypass mode Compact size: 2 x 2 x 1 mm Saves space in dense system layouts. Low inductance, repeatable transitions, and excellent thermal contact. Key Features TSY-13LNB+ 50Ω 0.03 to 1 GHz Wideband 2mm x 2mm

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits Monolithic Amplifier simplified schematic & pad description Function Pad Number Description (See Figure 1) RF-IN 1 & RF-IN 2 3,4 RF-Input pads. Pad 4 is connected to Pad 3 via two 0.1µF Capacitors RF-OUT 1 & RF-OUT2 & VDD 5,6 RF-Output pads. Pad 6 is connected to Pad 5 via 0.1µF Capacitor. Voltage Enable 1 Voltage Enable Pad. Voltage level on this pad determines Amplifier is ON or by- passed. Venable connected to VDD via RF Choke Ground Paddle Connect to ground. Use via holes as shown in “Suggested Layout for PCB Design” to reduce ground path inductance for best performance. N/C 2,7,8 No connection Product Features

  • Wideband: 0.03-1 GHz
  • Built-in Bypass switching
  • Low Noise figure: 1.2 dB typ.
  • P1dB: +17.1 dBm typ.
  • Low current and low voltage (2.7V and 7.7 mA) REV. OR M159512 TSY -13LNB+ GY/RS/CP 180309 General Description TSY-13LNB+(RoHS compliant) is an advanced Low Voltage, Low Current, Low Noise wideband Bypass amplifier fabricated using GaAs E-PHEMT technology offering extremely high dynamic range over a broad frequency range. It has integrated switches enabling users to bypass the amplifier. TSY is enclosed in a 8-lead 2 x 2 mm MCLP package for good thermal performance. Typical Applications
  • Wireless Base Station Systems
  • Test and Measurement Systems
  • Multi-Band Receivers 0 . 0 3 - 1 G H z Wideband CASE STYLE: MC1631-1 TSY-13LNB+ +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications PADDLE RF-IN 1 RF-IN 2 RF-OUT 1 RF-OUT 2 & VDD VOLTAGE ENABLE N/C N/C N/C

Monolithic E-PHEMT MMIC Amplifier Page 3 of 5 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits Parameter Ratings Operating Temperature (ground lead) -40°C to 85°C Storage Temperature -65°C to 150°C Total Power Dissipation 0.2W Input Power Amplifier - ON 10 dBm (continuous), +23 dBm (5 min. max) Amplifier Bypass 15 dBm (continuous), +22 dBm (5 min. max) DC Voltage VDD 6V DC Voltage Enable 6V 5. Permanent damage may occur if any of these limits are exceeded. Electrical maximum ratings are not intended for continuous normal operation. TSY-13LNB+ 1. Measured on Mini-Circuits Characterization Test Board TB-943-13LNB+. See Characterization Test Circuit (Fig. 1) 2. Current increases to 28-54 mA typ. at P1dB 3. Tested at Pout=+6 dBm/tone 4. ((Current at 85°C - Current at -45°C)/130) Electrical Specifications1 at 25°C, Zo=50Ω & VDD=2.7V unless otherwise noted Parameter Condition (GHz) Amplifier - ON Amplifier - Bypass Units Min. Typ. Max. Typ. Frequency Range 0.03 1 0.03 - 1 GHz Noise Figure 0.03 1.3 0.3 dB 0.3 1.2 0.5 0.5 1.2 0.8 0.8 1.4 0.5 1.0 1.4 1.3 Gain/ Insertion loss 0.03 — 15.3 — -0.5 dB 0.3 — 15.1 — -0.6 0.8 — 13.9 — -1.4 1.0 — 13.1 — -1.9 Input Return Loss 0.03 13 19 dB 0.3 14 19 0.5 14 14 0.8 11 10 1.0 10 8 Output Return Loss 0.03 16 18 dB 0.3 20 18 0.5 18 13 0.8 16 9 1.0 14 7 Output Power at 1dB Compression, AMP-ON2 0.03 15.9 1.2 dBm 0.3 16.8 2.6 0.5 17.1 2.7 0.8 17.3 1.9 1.0 17.6 3.1 Output IP33 0.03 25.6 24.9 dBm 0.3 27.5 27.6 0.5 26.4 28.4 0.8 27.8 26.9 1.0 24.7 30.4 Device Operating Voltage (VDD) 2.5 2.7 3.0 0 V Device Operating Current (ID+Ie) — 7.7 10.6 0.2 mA Enable Voltage (Ve) 2.5 2.7 3.0 0 V Device Current Variation vs. Temperature4 1.5 — µA/°C Device Current Variation vs. Voltage 0.0067 — mA/mV Thermal Resistance, junction-to-ground lead 229 — °C/W Absolute Maximum Ratings5 Min. Typ. Max. Units Amplifier-ON (VDD, Ve) 2.5 2.7 2.9 V Amplifier-Bypass (VDD, Ve) — — 0.3

Monolithic E-PHEMT MMIC Amplifier Page 4 of 5 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits TSY-13LNB+ 172L black body model family designation index over pin 1 Fig 1. Block Diagram of Test Circuit used for characterization. (DUT soldered on Mini-Circuits Characterization test board TB-943-13LNB+) Gain, Return loss, Output power at 1dB compression (P1dB), output IP3 (OIP3) and noise figure measured using Agilent’s N5242A PNA-X microwave network analyzer. Conditions: 1. Gain and Return loss: Pin= -25dBm 2. Output IP3 (OIP3): Two tones, spaced 1 MHz apart, +6 dBm/tone at output. Characterization Test Circuit Product Marking Switching Specifications Parameter Min. Typ. Max. Units Amplifier ON to Bypass OFF TIME (50% Control to 10% — 6 — µS FALL TIME (90 TO 10% RF) — 7 — Amplifier Bypass to ON ON TIME (50% Control to 90% — 59 — µS RISE TIME (10% to 90% RF) — 20 — Control Voltage Leakage — 443 — mV Ve Vdd Vs TB-943-13LNB+ Component P/N Supplier Value Size L1 LQG15HS3N0S02D Murata 1uH 0.115’’ x 0.11’’ L2 1008CS-120XJLC Coilcraft 3nH 0402 C1 to C8 GRM155R71C104KA88D Murata 0.1uF 0402 C9 GRM1555C1H120JA01D Murata 1000pF 0402 R1 RK73H1ETTP4320F KOA 432 Ω 0402

Monolithic E-PHEMT MMIC Amplifier Page 5 of 5 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits TSY-13LNB+ ESD Rating Human Body Model (HBM): Class 1A (Pass 250) in accordance with ANSI/ESD STM 5.1 - 2001 Machine. MSL Rating Moisture Sensitivity: MSL1 in accordance with IPC/JEDEC J-STD-020D Performance Data Data Table Swept Graphs S-Parameter (S2P Files) Data Set (.zip file) Case Style MC1631-1 Plastic package, exposed paddle, lead finish: matte-tin Tape & Reel F66 Standard quantities available on reel 7” reels with 20, 50, 100, 200, 500,1K or 2K devices Suggested Layout for PCB Design PL-536 Evaluation Board TB-943-13LNB+ Environmental Ratings ENV08T1 Additional Detailed Technical Information additional information is available on our dash board. To access this information click here MSL Test Flow Chart Additional Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Visual Inspection Electrical Test SAM Analysis Reflow 3 cycles, 260°C Soak 85°C/85RH 168 hours Bake at 125°C, 24 hours Visual Inspection Electrical Test SAM Analysis Start Finish