TSV634A

TSV632, TSV632A, TSV633, TSV633A, TSV634, TSV634A, TSV635, TSV635A

Document overview

• Manufacturer or author: STMICROELECTRONICS
• PDF pages: 31

Technical content

Datasheet sections

• 1 Package pin connections
• 2 Absolute maximum ratings and operating conditions
• 3 Electrical characteristics
• 4 Application information
• 4.1 Operating voltages
• 4.2 Rail-to-rail input
• 4.3 Rail-to-rail output
• 4.4 Shutdown function (TSV633, TSV635)
• 4.5 Optimization of DC and AC parameters
• 4.6 Driving resistive and capacitive loads
• 4.7 PCB layouts
• 4.8 Macromodel
• 5 Package information
• 5.1 DFN8 2 x 2 (NB) package information
• 5.2 SOT23-8 package information
• 5.3 MiniSO8 package information
• 5.4 MiniSO10 package information
• 5.5 SO8 package information
• 5.6 QFN16 3x3 package information
• 5.7 TSSOP14 package information
• 5.8 TSSOP16 package information
• 6 Ordering information
• 7 Revision history

Features

Rail-to-rail input and output Low power consumption: 60 µA typ at 5 V Low supply voltage: 1.5 V - 5.5 V Gain bandwidth product: 880 kHz typ Unity gain stable on 100 pF capacitor Low power shutdown mode: 5 nA typ Low offset voltage: 800 µV max (A version) Low input bias current: 1 pA typ EMI hardened op amps Automotive qualification

Related products

See the TSV52x series for higher merit factor (1.15 MHz for 45 µA) See the TSV61x (120 kHz for 9 µA) or TSV62x (420 kHz for 29 µA) for more power savings

Applications

Battery-powered applications Portable devices Signal conditioning Active filtering Medical instrumentation

Description

The TSV63x and TSV63xA series of dual and quad operational amplifiers offers low voltage operation and rail-to-rail input and output. This family features an excellent speed/power consumption ratio, offering an 880 kHz gain- bandwidth product while consuming only 60 µA at 5 V supply voltage. The devices also feature an ultralow input bias current and TSV633 and TSV635 have a shutdown mode. These features make the TSV63x and TSV63xA family ideal for sensor interfaces, bat tery- supplied and portable applications, and active filtering. Table 1: Device summary Reference Dual version Quad version Without standby With standby Without standby With standby TSV63x TSV632 TSV633 TSV634 TSV635 TSV63xA TSV632A TSV633A TSV634A TSV635A

TSV632, TSV632A, TSV633, TSV633A, TSV634, TSV634A, TSV635, TSV635A Package pin connections

1 Package pin connections

Figure 1: Pin connections for each package (top view) 1. The exposed pads of the DFN8 2x2 and the QFN16 3x3 can be connected to VCC- or left floating.

Absolute maximum ratings and operating conditions TSV632, TSV632A, TSV633, TSV633A, TSV634, TSV634A, TSV635, TSV635A

2 Absolute maximum ratings and operating conditions

Table 2: Absolute maximum ratings (AMR) Symbol Parameter Value Unit VCC Supply voltage (1) 6 V Vid Differential input voltage (2) ±VCC Vin Input voltage (3) (VCC-) - 0.2 to (VCC+) + 0.2 Iin Input current (4) 10 mA SHDN SHDN Shutdown voltage (3) (VCC-) - 0.2 to (VCC+) + 0.2 V Tstg Storage temperature -65 to 150 °C Rthja Thermal resistance junction to ambient (5)(6) DFN8 2x2 57 °C/W SOT23-8 105 MiniSO8 190 MiniSO10 113 SO8 125 QFN16 3x3 39 TSSOP14 100 TSSOP16 95 Tj Maximum junction temperature 150 °C ESD HBM: human body model (7) 4000 V MM: machine model (8) 300 CDM: charged device model (9) 1500 Latch-up immunity 200 mA Notes: (1)All voltage values, except the differential voltage are with respect to the network ground terminal. (2)Differential voltages are the non-inverting input terminal with respect to the inverting input terminal. (3)VCC - VIN must not exceed 6 V, VIN must not exceed 6 V. (4)Input current must be limited by a resistor in series with the inputs (5)Rth are typical values (6)Short-circuits can cause excessive heating and destructive dissipation (7)Human body model: 100 pF discharged through a 1.5 kΩ resistor between two pins of the device, done for all couples of pin combinations with other pins floating. (8)Machine model: a 200 pF cap is charged to the specified voltage, then discharged directly between two pins of the device with no external series resistor (internal resistor < 5 Ω), done for all couples of pin combinations with other pins floating (9)Charged device model: all pins plus package are charged together to the specified voltage and then discharged directly to the ground.

TSV632, TSV632A, TSV633, TSV633A, TSV634, TSV634A, TSV635, TSV635A Absolute maximum ratings and operating conditions Table 3: Operating conditions Symbol Parameter Value Unit VCC Supply voltage 1.5 to 5.5 V VICM Common-mode input voltage range (VCC-) - 0.1 to (VCC+) + 0.1 Toper Operating free-air temperature range -40 to 125 °C

TSV634A, TSV635, TSV635A

3 Electrical characteristics

Table 4: Electrical characteristics at VCC+ = 1.8 V with VCC- = 0 V, Vicm = VCC/2, Tamb = 25° C, and RL connected to VCC/2 (unless otherwise specified) Symbol Parameter Conditions Min. Typ. Max. Unit DC performance Vio Offset voltage TSV63x mV TSV63xA 0.8 TSV633AIST (MiniSO10) Tmin < Top < Tmax - TSV63x 4.5 Tmin < Top < Tmax - TSV63xA Tmin < Top < Tmax - TSV633AIST 2.2 ∆Vio/∆T Input offset voltage drift μV/°C Iio Input offset current (Vout = VCC/2) 1 10 (1) pA Tmin < Top < Tmax 1 100 Iib Input bias current (Vout = VCC/2) 1 10 (1) Tmin < Top < Tmax 1 100 CMR Common mode rejection ratio 20 log (ΔVic/ΔVio) 0 V to 1.8 V, Vout = 0.9 V 53 74 dB Tmin < Top < Tmax 51 Avd Large signal voltage gain RL= 10 kΩ, Vout = 0.5 V to 1.3 V 85 95 Tmin < Top < Tmax 80 VOH High level output voltage, (VOH = VCC - Vout) RL = 10 kΩ 5 35 mV Tmin < Top < Tmax VOL Low level output voltage RL = 10 kΩ 4 35 Tmin < Top < Tmax Iout Isink Vo = 1.8 V 6 12 mA Tmin < Top < Tmax 4 Isource Vo = 0 V 6 10 Tmin < Top < Tmax 4 ICC Supply current (per channel) No load, Vout = VCC/2 40 50 60 µA Tmin < Top < Tmax AC performance GBP Gain bandwidth product RL = 2 kΩ, CL = 100 pF, f = 100 kHz 700 790 kHz ɸm Phase margin RL = 2 kΩ, CL = 100 pF Degrees Gm Gain margin RL = 2 kΩ, CL = 100 pF dB SR Slew rate RL = 2 kΩ, CL = 100 pF, Av = 1 0.2 0.27 V/μs en Equivalent input noise voltage f = 1 kHz nV/√Hz f = 10 kHz Notes: (1)Guaranteed by design

TSV632, TSV632A, TSV633, TSV633A, TSV634, TSV634A, TSV635, TSV635A

Electrical characteristics

Table 5: Shutdown characteristics VCC = 1.8 V Symbol Parameter Conditions Min. Typ. Max. Unit DC performance ICC Supply current in shutdown mode (all channels) SHDN = VCC- 2.5 50 nA Tmin < Top < 85° C 200 Tmin < Top < 125° C 1.5 µA ton Amplifier turn-on time RL = 2 kΩ, Vout = (VCC-) to (VCC-) + 0.2 V 200 ns toff Amplifier turn-off time RL = 2 kΩ, Vout = (VCC+) - 0.5 V to (VCC+) - 0.7 V VIH SHDN logic high 1.35 V VIL SHDN logic low 0.6 IIH SHDN current high SHDN = VCC+ pA IIL SHDN current low SHDN = VCC- IOLeak Output leakage in shutdown mode SHDN = VCC- Tmin < Top < 125° C nA

TSV634A, TSV635, TSV635A Table 6: VCC+ = 3.3 V, VCC- = 0 V, Vicm = VCC/2, Tamb = 25° C, RL connected to VCC/2 (unless otherwise specified) Symbol Parameter Conditions Min. Typ. Max. Unit DC performance Vio Offset voltage TSV63x mV TSV63xA 0.8 TSV633AIST (MiniSO10) Tmin < Top < Tmax - TSV63x 4.5 Tmin < Top < Tmax - TSV63xA Tmin < Top < Tmax - TSV633AIST 2.2 ∆Vio/∆T Input offset voltage drift μV/°C Iio Input offset current Vout = VCC/2 1 10 (1) pA Tmin < Top < Tmax 1 100 Iib Input bias current Vout = VCC/2 1 10 (1) Tmin < Top < Tmax 1 100 CMR Common mode rejection ratio 20 log (ΔVic/ΔVio) 0 V to 3.3 V, Vout = 1.65 V 57 79 dB Tmin < Top < Tmax 53 Avd Large signal voltage gain RL = 10 kΩ, Vout = 0.5 V to 2.8 V 88 98 Tmin < Top < Tmax 83 VOH High level output voltage, (VOH = VCC - Vout) RL = 10 kΩ 5 35 mV Tmin < Top < Tmax VOL Low level output voltage RL = 10 kΩ 4 35 Tmin < Top < Tmax Iout Isink Vo = 3.3 V 23 45 mA Tmin < Top < Tmax 20 Isource Vo = 0 V 23 38 Tmin < Top < Tmax 20 ICC Supply current, (per channel) No load, Vout = 1.75 V 43 55 64 µA Tmin < Top < Tmax AC performance GBP Gain bandwidth product RL = 2 kΩ, CL = 100 pF, f = 100 kHz 710 860 kHz ɸm Phase margin RL = 2 kΩ, CL = 100 pF Degrees Gm Gain margin RL = 2 kΩ, CL = 100 pF dB SR Slew rate RL = 2 kΩ, CL = 100 pF, AV = 1 0.22 0.29 V/μs Notes: (1)Guaranteed by design

TSV632, TSV632A, TSV633, TSV633A, TSV634, TSV634A, TSV635, TSV635A Table 7: Electrical characteristics at VCC+ = 5 V with VCC- = 0 V, Vicm = VCC/2, Tamb = 25° C, and RL connected to VCC/2 (unless otherwise specified) Symbol Parameter Conditions Min. Typ. Max. Unit DC performance Vio Offset voltages TSV63x mV TSV63xA 0.8 TSV633AIST ( MiniSO10) Tmin < Top < Tmax - TSV63x 4.5 Tmin < Top < Tmax - TSV63xA Tmin < Top < Tmax - TSV633AIST 2.2 ∆Vio/∆T Input offset voltage drift μV/°C Iio Input offset current (Vout = VCC/2) 1 10 (1) pA Tmin < Top < Tmax 1 100 Iib Input bias current (Vout = VCC/2) 1 10 (1) Tmin < Top < Tmax 1 100 CMR Common mode rejection ratio 20 log (ΔVic/ΔVio) 0 V to 5 V, Vout = 2.5 V 60 80 dB Tmin < Top < Tmax 55 SVR Supply voltage rejection ratio 20 log (ΔVCC/ΔVio) VCC = 1.8 to 5 V 75 102 Tmin < Top < Tmax 73 Avd Large signal voltage gain RL = 10 kΩ, Vout = 0.5 V to 4.5 V 89 98 Tmin < Top < Tmax 84 EMIRR EMI rejection ratio, EMIRR = -20 log (VRFpeak/ΔVio) VRF = 100 mVrms, f = 400 MHz VRF = 100 mVrms, f = 900 MHz VRF = 100 mVrms, f = 1800 MHz VRF = 100 mVrms, f = 2400 MHz VOH High level output voltage, (VOH = VCC - Vout) RL = 10 kΩ 7 35 mV Tmin < Top < Tmax VOL Low level output voltage RL = 10 kΩ 6 35 Tmin < Top < Tmax Iout Isink Vo = 5 V 40 69 mA Tmin < Top < Tmax 35 Isource Vo = 0 V 40 74 Tmin < Top < Tmax 35 ICC Supply current, (per channel) No load, Vout = VCC/2 50 60 69 µA Tmin < Top < Tmax AC performance GBP Gain bandwidth product RL = 2 kΩ, CL = 100 pF, f = 100 kHz 730 880 kHz Fu Unity gain frequency RL = 2 kΩ, CL = 100 pF 830 ɸm Phase margin RL = 2 kΩ, CL = 100 pF Degrees

TSV634A, TSV635, TSV635A Symbol Parameter Conditions Min. Typ. Max. Unit Gm Gain margin RL = 2 kΩ, CL = 100 pF dB SR Slew rate RL = 2 kΩ, CL = 100 pF, Av =1 0.25 0.34 V/μs en Equivalent input noise voltage f = 1 kHz nV/√Hz f = 10 kHz THD+en Total harmonic distortion + noise VCC = 5V, f = 1 kHz, Av = 1, RL = 100 kΩ, Vicm = VCC/2, Vout = 2Vpp 0.002 Notes: (1)Guaranteed by design Table 8: Shutdown characteristics at VCC = 5 V Symbol Parameter Conditions Min. Typ. Max. Unit DC performance ICC Supply current in shutdown mode (all channels) SHDN = VCC- 5 50 nA Tmin < Top < 85° C 200 Tmin < Top < 125° C 1.5 µA ton Amplifier turn-on time RL = 2 kΩ, Vout = (VCC-) to (VCC-) + 0.2 V 200 ns toff Amplifier turn-off time RL = 2 kΩ, Vout = (VCC+) - 0.5 V to (VCC+) - 0.7 V VIH SHDN logic high V VIL SHDN logic low 0.8 IIH SHDN current high SHDN = VCC+ pA IIL SHDN current low SHDN = VCC- IOLeak Output leakage in shutdown mode SHDN = VCC- Tmin < Top < 125 °C nA

TSV634A, TSV635, TSV635A

4 Application information

4.1 Operating voltages

The TSV63x and TSV63xA can operate from 1.5 to 5.5 V. Their parameters are fully specified for 1.8 V, 3.3 V, and 5 V power supplies. However, the parameters are very stable in the full V CC range and several characterization curves show the TSV63x and TSV63xA characteristics at 1.5 V. Additionally, the main specifications are guaranteed in extended temperature ranges from -40 °C to 125 °C.

4.2 Rail-to-rail input

The TSV63x and TSV63xA are built with two complementary PMOS and NMOS input differential pairs. The devices have a rail -to-rail input and the input common mode range is extended from (VCC-) - 0.1 V to (VCC+) + 0.1 V. The transition between the two pairs appears at (VCC+) - 0.7 V. In the transition region, the performance of CMRR, PSRR, Vio (Figure 16 and Figure 17), and THD is slightly degraded. Figure 16: Input offset voltage vs input common mode voltage at VCC = 1.5 V Figure 17: Input offset voltage vs input common mode voltage at VCC = 5 V The devices are guaranteed without phase reversal.

4.3 Rail-to-rail output

The operational amplifiers’ output levels can go close to the rails: 35 mV maximum above and below the rail when connected to a 10 kΩ resistive load to VCC/2.

TSV632, TSV632A, TSV633, TSV633A, TSV634, TSV634A, TSV635, TSV635A

Application information

4.4 Shutdown function (TSV633, TSV635)

The operational amplifiers are enabled when the SHDN pin is pulled high. To disable the amplifiers, the SHDN must be pulled down to V CC-. When in shutdown mode, the amplifiers’ output is in a high impedance state. The SHDN pin must never be left floating, but tied to VCC+ or VCC-. The turn-on and turn-off times are calculated for an output variat ion of ±200 mV. Figure 18 and Figure 19 show the test configurations. Figure 20 shows the time it takes the product to come out of shutdown mode and Figure 21 shows the time it takes the product to enter shutdown mode. Figure 18: Test configuration for turn-on time (Vout pulled down) Figure 19: Test configuration for turn-off time (Vout pulled down) Figure 20: Turn-on time, VCC = 5 V, Vout pulled down, T = 25° C Figure 21: Turn-off time, VCC = 5 V, Vout pulled down, T = 25° C Vcc-0.5V + +Vcc DUT GND GND2 kΩ Vcc-0.5V + +Vcc DUT GND GND2 kΩ µ 25° µ

TSV634A, TSV635, TSV635A

4.5 Optimization of DC and AC parameters

These devices use an innovative approach to reduce the spread of the main DC and AC parameters. An internal adjustment achieves a very narrow spread of the current consumption (60 µA typical, min/max at ±17 %). Parameters linked to the current consumption value, such as GBP, SR, and A vd, benefit from this narrow dispersion. All parts present a similar speed and the same behavior in terms of stability. In addition, the minimum values of GBP and SR are guaranteed (GBP = 730 kHz minimum and SR = 0.25 V/µs minimum).

4.6 Driving resistive and capacitive loads

These products are micropower, low -voltage, operational amplifiers optimized to drive rather large resistive loads, above 2 kΩ. For lower resistive loads, the THD level may significantly increase. In a follower configuration, these operational amplifiers can drive capacitive loads up to 100 pF with no oscillations. When driving larger capacitive loads, adding an in -series resistor at the output can improve the stability of the devices (see Figure 22 for recommended in -series resistor values). Once the in -series resistor value has been selected, the stability of the circuit should be tested on the bench and simulated with the simulation model. Figure 22: In-series resistor vs. capacitive load

4.7 PCB layouts

For correct operation, it is advised to add 10 nF decoupling capacitors as close as possible to the power supply pins.

TSV632, TSV632A, TSV633, TSV633A, TSV634, TSV634A, TSV635, TSV635A

4.8 Macromodel

Two accurate macromodels (with or without the shutdown feature) of the TSV63x and TSV63xA are available on STMicroelectronics’ web site at www.st.com. These models are a trade-off between accuracy and complexity (that is, time simulation) of the TSV63x and TSV63xA operational amp lifiers. They emulate the nominal performances of a typical device within the specified operating conditions mentioned in the datasheet. They also help to validate a design approach and to select the right operational amplifier, but they do not replace on-board measurements.

TSV634A, TSV635, TSV635A

5 Package information

In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK ® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark.

TSV632, TSV632A, TSV633, TSV633A, TSV634, TSV634A, TSV635, TSV635A

Package information

5.1 DFN8 2 x 2 (NB) package information

Figure 23: DFN8 2 x 2 mm (NB) package outline Table 9: DFN8 2 x 2 x 0.6 mm (NB) package mechanical data (pitch 0.5 mm) Ref. Dimensions Millimeters Inches 0.05 0.002 0.15 0.006 e 0.50 0.020 L 0.425 0.017 ddd 0.08 0.003

TSV634A, TSV635, TSV635A Figure 24: DFN8 2 x 2 mm (NB) recommended footprint

TSV632, TSV632A, TSV633, TSV633A, TSV634, TSV634A, TSV635, TSV635A

5.2 SOT23-8 package information

Figure 25: SOT23-8 package outline Table 10: SOT23-8 package mechanical data Ref. Dimensions Millimeters Inches A 1.45 0.057 0.15 0.006 A2 0.90 1.30 0.035 0.051 b 0.22 0.38 0.009 0.015 c 0.08 0.22 0.003 0.009 D 2.80 3.00 0.110 0.118 E 2.60 3.00 0.102 0.118 E1 1.50 1.75 0.059 0.069 e 0.65 0.026 1.95 0.077 L 0.30 0.60 0.012 0.024 < 0° 8° 0° Dimensions in mm SIDE VIEW A2A coplanar leads 0.1 C D e e/2 E1/2 Gauge plane L Seating plane 0.25 C E/2 E TOP VIEW b (8x leads)c projection

TSV634A, TSV635, TSV635A

5.3 MiniSO8 package information

Figure 26: MiniSO8 package outline Table 11: MiniSO8 package mechanical data Ref. Dimensions Millimeters Inches A 1.1 0.043 A1 0 0.15 0 0.006 b 0.22 0.40 0.009 0.016 c 0.08 0.23 0.003 0.009 e 0.65 0.026 0.95 0.037 0.25 0.010 k 0° 8° 0° ccc 0.10 0.004

TSV632, TSV632A, TSV633, TSV633A, TSV634, TSV634A, TSV635, TSV635A

5.4 MiniSO10 package information

Figure 27: MiniSO10 package outline Table 12: MiniSO-10 package mechanical data Ref. Dimensions Millimeters Inches A 1.10 0.043 e 0.50 0.020 0.95 0.037 aaa 0.10 0.004

TSV634A, TSV635, TSV635A

5.5 SO8 package information

Figure 28: SO8 package outline Table 13: SO8 package mechanical data Ref. Dimensions Millimeters Inches A 1.75 0.069 A1 0.10 0.25 0.004 0.010 A2 1.25 0.049 b 0.28 0.48 0.011 0.019 c 0.17 0.23 0.007 0.010 e 1.27 0.050 h 0.25 0.50 0.010 0.020 L 0.40 1.27 0.016 0.050 1.04 0.040 k 1° 8° 1° ccc 0.10 0.004

TSV632, TSV632A, TSV633, TSV633A, TSV634, TSV634A, TSV635, TSV635A

5.6 QFN16 3x3 package information

Figure 29: QFN16 3x3 mm package outline

TSV634A, TSV635, TSV635A Table 14: QFN16 3x3 mm package mechanical data Ref. Dimensions Millimeters Inches A1 0 0.05 0 0.002 0.20 0.008 b 0.18 0.30 0.007 0.012 D2 1.50 1.80 0.059 0.071 E2 1.50 1.80 0.059 0.071 e 0.50 0.020 L 0.30 0.50 0.012 0.020 Figure 30: QFN16 3x3 mm recommended footprint

TSV632, TSV632A, TSV633, TSV633A, TSV634, TSV634A, TSV635, TSV635A

5.7 TSSOP14 package information

Figure 31: TSSOP14 package outline Table 15: TSSOP14 package mechanical data Ref. Dimensions Millimeters Inches A 1.20 0.047 A1 0.05 0.15 0.002 0.004 0.006 b 0.19 0.30 0.007 0.012 c 0.09 0.20 0.004 0.0089 e 0.65 0.0256 1.00 0.039 k 0° 8° 0° aaa 0.10 0.004

TSV634A, TSV635, TSV635A

5.8 TSSOP16 package information

Figure 32: TSSOP16 package outline Table 16: TSSOP16 package mechanical data Ref. Dimensions Millimeters Inches A 1.20 0.047 A1 0.05 0.15 0.002 0.006 b 0.19 0.30 0.007 0.012 c 0.09 0.20 0.004 0.008 e 0.65 0.026 k 0° 8° 0° 1.00 0.039 aaa 0.10 0.004

TSV632, TSV632A, TSV633, TSV633A, TSV634, TSV634A, TSV635, TSV635A

Ordering information

6 Ordering information

Table 17: Order codes Order code Temperature range Package (1) Marking TSV632AIDT -40 °C to 125 °C SO8 TV632A TSV632AILT SOT23-8 K145 TSV632AIQ2T DFN8 2x2 K1P TSV632AIST MiniSO8 K145 TSV632IDT SΟ8 TSV632 TSV632ILT SOT23-8 K110 TSV632IQ2T DFN8 2x2 K1N TSV632IST MiniSO8 K110 TSV632IYDT -40 °C to 125 °C, automotive grade (2) SΟ8 V632IY TSV633AIST -40 °C to 125 °C MiniSO10 K146 TSV633IST K111 TSV634AIPT TSSOP14 TSV634A TSV634IQ4T QFN16 3x3 K112 TSV634IPT TSSOP14 TSV634 TSV634IYPT -40 °C to 125 °C, automotive grade (2) V634IY TSV635AIPT -40 °C to 125 °C TSSOP16 TSV635A TSV635IPT TSV635 Notes: (1)All devices are in tape and reel packing (2)Qualified and characterized according to AEC Q100 and Q003 or equivalent, advanced screening according to AEC Q001 and Q002.

TSV634A, TSV635, TSV635A

7 Revision history

Table 18: Document revision history Date Revision Changes 25-May-2009 1 Initial release. 15-Jun-2009 2 Corrected pin connection diagram in Figure 1. 03-Sep-2009 3 Added root part numbers (TSV63xA) and Table 1: "Device summary" on cover page. Added order code TSV632AILT in Table 17: "Order codes". 07-Nov-2011 4 Added DFN8 2x2 package mechanical drawing. Added ordering information for DFN package to Table 17: "Order codes". Corrected unit on Y axis of Figure 16 and Figure 17. 13-Dec-2012 5 Updated Features Added QFN16 3x3 package Updated Figure 1: "Pin connections for each package (top view)". Table 4, Table 6, and Table 7: replaced DVio symbol with ∆Vio/∆T Table 4, Table 5, Table 6, Table 7 and Table 8: for supply current parameter, replaced “operator” with “channel”. Table 17: "Order codes": added automotive order codes and updated footnote Deleted TSV632ID/AID from order codes in Table 17: "Order codes" 29-May-2015 6 Table 4, Table 6, and Table 7: VOH "min" values changed to "max" values. Table 17: "Order codes": added order code TSV632AIQ2T, updated footnote 1.