TSSP980 VISHAY | Alldatasheet

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

TSSP980.. www.vishay.com Vishay Semiconductors Rev. 1.4, 13-Apr-2022 1 Document Number: 82869 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IR Receiver Module for Light Barrier Systems LINKS TO ADDITIONAL RESOURCES

DESCRIPTION

The TSSP980.. is a compact infrared detector module for presence, proximity, or light curtain applications. It provides an active low output in response to infrared bursts at 940 nm. The frequency of the burst should correspond to the carrier frequency shown in the parts table. This component has not been qualified according to automotive specifications.

FEATURES

  • Presence sensor: up to 2 m distance, find more info at: www.vishay.com/doc?49009
  • Light barrier: up to 12 m distance, TSAL6200 with IF = 50 mA, find more info at: www.vishay.com/doc?49650
  • Fast proximity: up to 2 m range at 5 ms response time, find more info at: www.vishay.com/doc?82741
  • Supply voltage: 2.0 V to 3.6 V
  • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 MECHANICAL DATA Pinning: 1 = OUT, 2 = GND, 3 = V S ORDERING CODE TSSP980.. - 1500 pieces in bags

APPLICATIONS

  • Reflective sensors for hand dryers, towel or soap dispensers, water faucets, toilet flush
  • Vending machine fall detection
  • Security and pet gates
  • Person or object vicinity switch
  • Fast proximity sensors for toys, robotics, drones, and other consumer and industrial uses BLOCK DIAGRAM PRESENCE SENSING 19026 Product Page 333DDD3 D 3D Models Calculators Marking Packages Holders Bends and Cuts 33 kΩ VS OUTDemo- GND passAMPInput PIN Band dulator 16833_8 +3 V IR emitter +3 V 38 kHz Envelope signal Out to μC

TSSP980.. www.vishay.com Vishay Semiconductors Rev. 1.4, 13-Apr-2022 2 Document Number: 82869 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Note

  • Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress ratin g only and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect the device reliability PARTS TABLE Carrier frequency 38 kHz TSSP98038 56 kHz TSSP98056 Package Minicast Pinning 1 = OUT, 2 = GND, 3 = V S Dimensions (mm) 5.0 W x 6.95 H x 4.8 D Mounting Leaded Application Presence sensors, fast proximity sensors ABSOLUTE MAXIMUM RATINGS PARAMETER TEST CONDITION SYMBOL VALUE UNIT Supply voltage V S -0.3 to +3.6 V Supply current I S 5m A Output voltage V O -0.3 to +3.6 V Output current I O 5m A Junction temperature T j 100 °C Storage temperature range T stg -25 to +85 °C Operating temperature range T amb -25 to +85 °C Power consumption T amb ≤ 85 °C P tot 10 mW ELECTRICAL AND OPTICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Supply current (pin 3) E v = 0, VS = 5 V I SD 0.25 0.37 0.45 mA Ev = 40 klx, sunlight I SH -0 . 8-m A Supply voltage V S 2.0 - 3.6 V Transmission distance Ev = 0, test signal see fig. 1, IR diode TSAL6200, IF = 50 mA d- 8 - m Output voltage low (pin 1) IOSL = 0.5 mA, Ee = 2 mW/m2, test signal see fig. 1 VOSL - - 100 mV Minimum irradiance Pulse width tolerance: tpi - 5/fo < tpo < tpi + 6/fo, test signal see fig. 1 Ee min. -0 . 7 1 . 2 m W / m 2 Maximum irradiance tpi - 5/fo < tpo < tpi + 6/fo, test signal see fig. 1 Ee max. 30 - - W/m 2 Directivity Angle of half transmission distance ϕ1/2 -± 4 5- °

TSSP980.. www.vishay.com Vishay Semiconductors Rev. 1.4, 13-Apr-2022 3 Document Number: 82869 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) Fig. 1 - Output Active Low Fig. 2 - Pulse Length and Sensitivity in Dark Ambient Fig. 3 - Output Function Fig. 4 - Output Pulse Diagram Fig. 5 - Frequency Dependence of Responsivity Fig. 6 - Sensitivity vs. Ambient Temperature 16110 Ee T tpi * t * tpi 10/f0 is recommended for optimal function VO VOH VOL t Optical Test Signal (IR diode TSAL6200, IF = 0.4 A, 30 pulses, f = f 0, t = 10 ms) Output Signal td 1) tpo 2) 1) 7/f0 < td < 15/f02) tpi - 5/f0 < tpo < tpi + 6/f0 100 1000 10000 0.60 0.65 0.70 0.75 0.80 0.85 0.90 0.1 10 1000 100 000 Axis Title 1st line 2nd line 2nd line tpo - Output Pulse Width (ms) Ee - Irradiance (mW/m2) Output pulse width Input burst length λ= 9 5 0 n m , optical test signal, Fig. 1 Ee t VO VOH VOL t 600 µs 600 µs t = 60 ms ton toff 94 8134 Optical Test Signal Output Signal, (see Fig. 4) 100 1000 10000 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.1 1 10 100 1000 10 000 Axis Title 1st line 2nd line 2nd line ton, toff - Output Pulse Width (ms) Ee - Irradiance (mW/m2) ton toff λ= 9 5 0n m , optical test signal, Fig. 3 0.0 0.2 0.4 0.6 0.8 1.0 1.2 0.7 0.9 1.1 1.3 f/f0 - Relative Frequency16925 f = f0 ± 5 % Δf(3 dB) = f0/10 Ee min./Ee - Relative Responsivity 100 1000 10000 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 -30 -10 10 30 50 70 90 Axis Title 1st line 2nd line 2nd line Ee min. - Threshold Irradiance (mW/m2) Tamb - Ambient Temperature (°C)

TSSP980.. www.vishay.com Vishay Semiconductors Rev. 1.4, 13-Apr-2022 4 Document Number: 82869 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Fig. 7 - Relative Spectral Sensitivity vs. Wavelength Fig. 8 - Horizontal Directivity Fig. 9 - Vertical Directivity Fig. 10 - Sensitivity vs. Supply Voltage The typical application of this device is a reflective or beam break sensor with active lo w “detect” or “no detect” information contained in its output. The TSSP980.. is also suitable for fast (~ 15 ms) pr oximity sensor applications for ranges between 10 cm and 2 m, if a burst pattern with variable intensity is used. Example for a sensor hardware: There should be no common window in front of the emitter and detector in order to av oid crosstalk via guided light through the window. 100 1000 10000 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 750 850 950 1050 1150 Axis Title 1st line 2nd line 2nd line S(λ)rel. - Relative Spectral Sensitivity λ - Wavelength (nm)21425 19258 0.4 0.2 00.6 0.9 30° 10° 20° 40° 50° 60° 70° 80° 1.0 0.8 0.7 drel - Relative Transmission Distance 19259 0.4 0.2 00.6 0.9 30° 10° 20° 40° 50° 60° 70° 80° 1.0 0.8 0.7 drel - Relative Transmission Distance 100 1000 10000 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 Axis Title 1st line 2nd line 2nd line Ee min. - Threshold Irradiance (mW/m2) VS - Supply Voltage (V) Emitter TSAL6200 IR detector Separation to avoid crosstalk by stray light inside the housing

TSSP980.. www.vishay.com Vishay Semiconductors Rev. 1.4, 13-Apr-2022 5 Document Number: 82869 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PACKAGE DIMENSIONS in millimeters 1.2 ± 0.2 30.5 ± 0.5 6.95 ± 0.3 (5.55) 8.25 ± 0.3 0.85 max. (1.54) 0.9 1.1 (4) 4.8 2.8 Drawing-No.: 6.550-5263.01-4 Issue: 12; 16.04.10 2.54 nom. 2.54 nom. 0.5 max.0.7 max. specifications according to DIN technical drawings Not indicated to lerances ± 0.2 Marking area R 2 R 219009

www.vishay.com Vishay Revision: 01-Jan-2023 1 Document Number: 91000 Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA AR E SUBJECT TO CHANGE WITH OUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, incl uding warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of pro ducts for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in ge neric applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specificat ions may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party web site or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED