TSSP57P38 VISHAY | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 24

Technical content

www.vishay.com Vishay Semiconductors Rev. 1.7, 14-Apr-16 1 Document Number: 82480 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IR Detector for Mid Range Proximity Sensor

DESCRIPTION

The TSSP57P38 is a compact infrared detector module for proximity sensing application. It receives 38 kHz modulated signals and has a peak sensitivity of 940 nm. The length of the detector’s output pulse varies in proportion to the amount of light reflected from the object being detected. ORDERING CODE Taping: TSSP57P38TT1 - top view taped TSSP57P38TT2 - top view taped

FEATURES

  • Height of 0.8 mm
  • Up to 2 m for proximity sensing
  • Receives 38 kHz modulated signal
  • 940 nm peak wavelength
  • Photo detector and preamplifier in one package
  • Low supply current
  • Shielding against EMI
  • Visible light is suppressed by IR filter
  • Insensitive to supply voltage ripple and noise
  • Supply voltage: 2.5 V to 5.5 V
  • Material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912

APPLICATIONS

  • Object approach detection for activation of displays and user consoles, signaling of alarms, etc.
  • Simple gesture controls
  • Differentiation of car arriva l, static, car departure in parking lots
  • Reflective sensors for toilet flush
  • Navigational sensor for robotics BLOCK DIAGRAM PROXIMITY SENSING 22531-1 PARTS TABLE Carrier frequency 38 kHz TSSP57P38 Package Belobog Pinning 1 = OUT, 2, 3, 6, 7, 8 = GND, 4, 5 = VS Dimensions (mm) 3.95 W x 3.95 H x 0.8 D Mounting SMD Application Proximity sensors 33 kΩ 2, 3, 6, 7, 8 4, 5 V S OUTDemo- GND passAGCInput PIN Band dulator Control circuit 16833_20 +3 V IR emitter +3 V 38 kHz Out to μC TSSP57P38 Envelope signal

www.vishay.com Vishay Semiconductors Rev. 1.7, 14-Apr-16 2 Document Number: 82480 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Note

  • Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress ratin g only and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect the device reliability. TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) Fig. 1 - Output Active Low Fig. 2 - Pulse Length and Sensitivity in Dark Ambient ABSOLUTE MAXIMUM RATINGS PARAMETER TEST CONDITION SYMBOL VALUE UNIT Supply voltage V S -0.3 to +6 V Supply current I S 5m A Output voltage V O -0.3 to (VS + 0.3) V Output current I O 5m A Junction temperature T j 100 °C Storage temperature range T stg -25 to +85 °C Operating temperature range T amb -25 to +85 °C Power consumption T amb ≤ 85 °C P tot 10 mW ELECTRICAL AND OPTICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Supply voltage V S 2.5 - 5.5 V Supply current VS = 5 V, Ee = 0 I SD 0.55 0.7 0.9 mA Ev = 40 klx, sunlight I SH -0 . 8-m A Receiving distance Direct line of sight, IR diode TSAL6200, IF = 250 mA, test signal see fig. 1 d- 4 0 - m Output voltage low IOSL = 0.5 mA, Ee = 0.7 mW/m2, test signal see fig. 1 VOSL - - 100 mV Minimum irradiance Pulse width tolerance: tpi - 5/fo < tpo < tpi + 6/fo, test signal see fig. 1 Ee min. -0 . 2 0 . 4 m W / m 2 Maximum irradiance tpi - 5/fo < tpo < tpi + 6/fo, test signal see fig. 1 Ee max. 50 - - W/m 2 Directivity Angle of half receiving distance ϕ1/2 -± 7 5- d e g Ee T t * tpi 10/f0 is recommended for optimal function VO VOH VOL t 16110_4 Optical Test Signal (IR diode TSAL6200, IF = 0.4 A, 30 pulses, f = f 0, t = 10 ms) Output Signal td 1) tpo 2) 1) 7/f0 < td < 15/f0 2) tpi - 5/f0 < tpo < tpi + 6/f0 tpi * 1.0 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 0.1 1 10 10 2 103 104 Ee - Irradiance (mW/m2) tpo - Output Pulse Width (ms) Input Burst Length Output Pulse Width λ = 950 nm, Optical Test Signal, Fig.1 0.1

www.vishay.com Vishay Semiconductors Rev. 1.7, 14-Apr-16 3 Document Number: 82480 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Fig. 3 - Frequency Dependance of Responsivity Fig. 4 - Sensitivity in Bright Ambient Fig. 5 - Sensitivity vs. Supply Voltage Disturbances Fig. 6 - Output Pulse Width vs. Irradiance Fig. 7 - Sensitivity vs. Ambient Temperature Fig. 8 - Relative Spectral Sensitivity vs. Wavelength 0.0 0.2 0.4 0.6 0.8 0.9 1.0 25 30 45 50 f/f0 - Relative Frequency E /E - Rel. Responsivitye min. e 4035 0.1 0.3 0.5 0.7 f = f0 ± 5 % Δf (3 dB) = f0/10 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 0.01 0.1 1 10 100 Ee - Ambient DC Irradiance (W/m2) Ee min. - Threshold Irradiance (mW/m2) Correlation with Ambient Light Sources: 10 W/m2 = 1.4 kLx (Std. illum. A, T = 2855 K) 10 W/m2 = 8.2 kLx (Daylight, T = 5900 K) Wavelength of Ambient Illumination: λ = 950 nm 4.5 5.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1 10 100 1000 ΔVsRMS - AC Voltage on DC Supply Voltage (mV) Ee min. - Threshold Irradiance (mW/m2) f = f0 f = 20 kHz f = 30 kHz f = 100 Hz f = 10 kHz 22088 100 120 140 160 180 200 0.1 1 10 100 tpo - Output Pulse Width (ms) Ee - Irradiance (mW/m2) Burst length = 300 ms, f = fO Tamb - Ambient Temperature (°C) Ee min. - Sensitivity (mW/m2) 0.05 0.10 0.15 0.20 0.40 -30 -10 10 30 50 70 90 0.30 0.25 0.35 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 750 800 850 900 950 1000 1050 1150 λ - Wavelength (nm) S(λ)rel - Relative Spectral Sensitivity 1100

www.vishay.com Vishay Semiconductors Rev. 1.7, 14-Apr-16 4 Document Number: 82480 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Fig. 9 - Max. Rate of Bursts Fig. 10 - Angle Characteristic Fig. 11 - tpo vs. Distance Fig. 12 - Dynamic Range of Sensor vs. tpi The typical application of the TSSP57P38 is a reflective sensor with analog information contained in its output. Such a sensor is evaluating the time required by the AGC to suppress a quasi continuous signal. The time required to suppress such a signal is longer when the signal is strong than when the signal is weak, resulting in a pulse length corresponding to the distance of an object from the sensor. This kind of analog information can be evaluated by a microcontroller. The absolute amount of reflected light depends much on th e environment and is not evaluated. Only sudden changes of the amount of reflected light, and therefore changes in the pulse width, are evaluated using this application. Example of a signal pattern: 100 200 300 400 500 800 0 40 80 120 18020 60 100 140 tpi (ms) trepeat min. (ms) 600 700 160 0.2 0.4 0.6 0.8 1.0 1.2 -90 90 Angle (°) 70503010-10-30-50-70 Relative Response DistanceDirectivity Characteristic of a Reflective Sensor using VSMB1940X01 and TSSP57P38 Response Distance (m) tpo (ms) 100 120 IF = 100 mA IF = 50 mAIF = 30 mAIF = 10 mA Emitter: VSMB1940X01 tpi (ms) dmax./dmin. 10 20 30 40 110 120 1009080706050 Optical signal Response of the TSSP57P38 (strong reflection) trepeat = 500 ms tpi = 120 ms, 38 kHz Response of the TSSP57P38 (weak reflection)

www.vishay.com Vishay Semiconductors Rev. 1.7, 14-Apr-16 5 Document Number: 82480 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Example for a sensor hardware: There should be no common window in front of the emitter and receiver in order to avoid crosstalk by guided light through the window. The logarithmic characteristic of the AGC in the TSSP57P38 results in an almost linear relationship between distance and pulse width. Ambient light has also some impact to the pulse width of this kind of sensor, making the pulse shorter. PACKAGE DIMENSIONS in millimeters Emitter TSAL6200 IR Receiver TSSP57P38 Separation to avoid crosstalk by stray light inside the housing Notes (1) Optically effective area (2) Pins connected internally. It is not necessary to connect externally. Drawing-No.: 6.550-5315.01-4 Issue: 2; 12.02.14 Not indicated tolerances ± 0.1 technical drawings according to DIN specifications Proposed pad layout from component side (dim. for reference only) (3.95) (3.95) (0.35) (0.8) (2.75) (3) (4 x) (4x) 0.55 (0.95) 0.55 (1.8) 0.75± 0.05 4 x 0.75 = 3 0.35± 0.05 (8 x) 1.5 (0.3) (0.3) (0.3) (0.7) 0.475 (0.4) 0.8 0.15 Pinning from topview GND GND Out Vs (Vs) (GND) (GND) (GND) 1 2 3 4 5 8 7 6 Pin 1 identification (2) (2) (2) (2) 3.95 3.95 (2.75) (1.9) (3.4) marking area Pin 1 Identification (1) (1) (1)

www.vishay.com Vishay Semiconductors Rev. 1.7, 14-Apr-16 6 Document Number: 82480 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ASSEMBLY INSTRUCTIONS Reflow Soldering

  • Reflow soldering must be done within 168 h while stored under a max. tempera ture of 30 °C, 60 % RH after opening the dry pack envelope
  • Set the furnace temperatures for pre-heating and heating in accordance with the reflow temperature profile as shown in the diagram. Exercise extreme care to keep the maximum temperature below 260 °C. The temperature shown in the profile means the temperature at the device surface. Since there is a temperature difference between the component and the circuit board, it should be verified that the temperature of the device is accurately being measured
  • Handling after reflow should be done only after the work surface has been cooled off Manual Soldering
  • Use a soldering iron of 25 W or less. Adjust the temperature of the soldering iron below 300 °C
  • Finish soldering within 3 s
  • Handle products only after the temperature has cooled off VISHAY LEAD (Pb)-FREE REFLOW SOLDER PROFILE Note (1) MOQ: minimum order quantity

ORDERING INFORMATION

ORDERING CODE PACKAGING VOLUME (1) REMARKS TSSP57P38TT1 Tape and reel MOQ: 1800 pcs 3.95 mm x 3.95 mm x 0.75 mmTSSP57P38TT2 MOQ: 7000 pcs 100 150 200 250 300 0 50 100 150 200 250 300 t (s) T (°C) 255 °C 240 °C 245 °C max. 260 °C max. 120 s max. 100 s 217 °C max. 20 s max. Ramp Up 3 °C/s max. Ramp Down 6 °C/s max. 2 cycles allowed19800

www.vishay.com Vishay Semiconductors Rev. 1.7, 14-Apr-16 7 Document Number: 82480 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TAPING VERSION TSSP57P38 DIMENSIONS in millimeters Leader and trailer tape: Parts mounted Empty trailer 200 mm min. Empty leader 400 mm min. Direction of pulling out Unreel direction Ø 60 min. Ø Y 2 ± 0.5 Label posted here coming out from reel Tape position (12.4) 18.4 max. Ø 13 ± 0.2Ø 21 ± 0.8 100 mm min. with cover tape X 2:1 Tape and reel dimensions: (2) (1.75) (5.5) 12 ± 0.3 (8) (4)(Ø 1.5) (0.3) Reel size "Y" TT1 Ø 180 ± 2 = 1800 pcs. TT2 Ø 330 ± 2 = 7000 pcs. (1.2) Technical drawings according to DIN specifications Not indicated tolerances ± 0.1Drawing-No.: 9.700-5347.01-4 Issue: 1; 14.11.11

www.vishay.com Vishay Semiconductors Rev. 1.7, 14-Apr-16 8 Document Number: 82480 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 LABEL Standard bar code labels for finished goods The standard bar code labels are product labels and used for identification of goods. The finished goods are packed in final packing area. The standard packing units are labeled with standard bar code labels before transported as finished goods to warehouses. The labels are on each packing unit and contain Vishay Semiconductor GmbH specific data. DRY PACKING The reel is packed in an anti-humidity bag to protect the devices from absorbing moisture during transportation and storage. FINAL PACKING The sealed reel is packed into a cardboard box. A secondary cardboard box is used for shipping purposes. RECOMMENDED METHOD OF STORAGE Dry box storage is recommended as soon as the aluminum bag has been opened to preve nt moisture absorption. The following conditions should be observed, if dry boxes are not available:

  • Storage temperature 10 °C to 30 °C
  • Storage humidity ≤ 60 % RH max. After more than 168 h under these conditions moisture content will be too high for reflow soldering. In case of moisture absorptio n, the devices will recover to the former condition by drying under the following condition: 192 h at 40 °C + 5 °C / - 0 °C and < 5 % RH (dry air / nitrogen) or 96 h at 60 °C + 5 °C and < 5 % RH for all device containers or 24 h at 125 °C + 5 °C not suitable for reel or tubes. An EIA JEDEC ® standard J-STD-020 level 3 label is included on all dry bags. VISHAY SEMICONDUCTOR GmbH STANDARD BAR CODE PRODUCT LABEL (finished goods) PLAIN WRITING ABBREVIATION LENGTH Item-description -1 8 Item-number INO 8 Selection-code SEL 3 LOT-/serial-number BATCH 10 Data-code COD 3 (YWW) Plant-code PTC 2 Quantity QTY 8 Accepted by ACC - Packed by PCK - Mixed code indicator MIXED CODE - Origin xxxxxxx+ Company logo Long bar code top Type Length Item-number N8 Plant-code N2 Sequence-number X3 Quantity N8 Total length -2 1 Short bar code bottom Type Length Selection-code X3 Data-code N3 Batch-number X1 0 Filter -1 Total length -1 7 Aluminum bag Label Reel 15973

www.vishay.com Vishay Semiconductors Rev. 1.7, 14-Apr-16 9 Document Number: 82480 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 EIA JEDEC standard J-STD-020 level 3 label is included on all dry bags ESD PRECAUTION Proper storage and handling procedures should be followed to prevent ESD damage to the devices especially when they are removed from the antistatic shielding bag. Electrostatic sensitive devices warning labels are on the packaging. VISHAY SEMICONDUCTORS STANDARD BAR CODE LABELS The Vishay Semiconductors st andard bar code labels are printed at final packing areas. The labels are on each packing unit and contain Vishay Semiconductors specific data. BAR CODE PRODUCT LABEL (Example) 1. Calculated shelf life in sealed bag: 12 months at <40°C and <90% relative humidity (RH) 3. After bag is opened, devices that will be subjected to reflow solder or other high temperature process must be 4. Devices require bake, before mounting, if: a) Humidity Indicator Card reads > 10% for level 2a - 5a devices or >60% for level 2 devices when read at 23±5°C b) 3a or 3b are not met 5. If baking is required, refer to IPC/JEDEC J-STD-033 for bake procedure If blank, see adjacent bar code label ≤30°C/60% RH, or b) Stored per J-STD-033 If blank, see adjacent bar code label If blank, see adjacent bar code label Note: Level and body temperature defined by IPC/JEDEC J-STD-020 This bag contains MOISTURE-SENSITIVE DEVICES Caution If blank, see adjacent bar code label LEVEL 260 168 22650 22178

www.vishay.com Vishay Semiconductors Rev. 2.2, 21-Feb-17 1 Document Number: 80125 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Tape and Reel Standards for Surface-Mount IR Receiver Modules Vishay Semiconductor surface-mount IR receivers are packaged on tape and reel. The following specification is based on IEC publication 286, which takes the industrial requirements for automatic insertion into account. Absolute maximum ratings, mechanical dimensions, optical and electrical characteristics for taped devices are identical to the basic catalog types and can be found in the specifications for untaped devices. PACKAGING The tapes of components are available on reels. Each reel is marked with labels which contain the following information: - Vishay - Type - Group - Tape code, normally part of type name - Production code - Quantity MISSING COMPONENTS Up to 3 consecutive components may be missing if the gap is followed by at least 6 components. A maximum of 0.5 % of the components per reel quantity may be missing. At least 5 empty positions are present at the start and the end of the tape to enable tape insertion. Tensile strength of the tape: > 15 N NUMBER OF COMPONENTS A. Panhead: quantity per reel: TT, top view package, 1190 pcs TR, side view package, 1120 pcs B. Heimdall: quantity per reel: TT, top view package, 2200 pcs TR, side view package, 2300 pcs C. Heimdall without lens: quantity per reel: WTT, top view package, 2200 pcs WTR, side view package, 2300 pcs D. Belobog: quantity per reel: TT1, top view package, 1800 pcs TT2, top view package, 7000 pcs E. Belobog with shield: quantity per reel: TT1, top view package, 1500 pcs TT2, top view package, 5000 pcs F. Minimold DF1P: quantity per reel: DF1P, 1100 pcs G. TVCastSMD TR: quantity per reel: TR, side view package, 2200 pcs ORDER DESIGNATION The type designation of the device is extended by TT or TT1 for top view or TR for side view. Example: TSOP6238TR (reel packing) TSOP75238TR (reel packing) TSOP75338WTT (reel packing) TSOP57438TT1 (reel packing) TSOP57238HTT1 (reel packing) TSOP39438TR (reel packing)

www.vishay.com Vishay Semiconductors Rev. 2.2, 21-Feb-17 2 Document Number: 80125 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 REEL DIMENSIONS FOR PANHEAD, HEIMDALL, AND TVCASTSMD TR in millimeters Note

  • The body structure of the reel can vary 16734

www.vishay.com Vishay Semiconductors Rev. 2.2, 21-Feb-17 3 Document Number: 80125 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TAPING VERSION TSOP..TT (TOP VIEW) DIMENSIONS in millimeters 16584

www.vishay.com Vishay Semiconductors Rev. 2.2, 21-Feb-17 4 Document Number: 80125 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TAPING VERSION TSOP..TT (TOP VIEW) DIMENSIONS in millimeters 0.3 3.65 7.51.75 Ø 1.5 Ø 1.5 Drawing-No.: 9.700-5338.01-4 Issue: 4; 12.06.13 technical drawings according to DIN specifications Direction of feed

www.vishay.com Vishay Semiconductors Rev. 2.2, 21-Feb-17 5 Document Number: 80125 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TAPING VERSION TSOP..TT (TOP VIEW) DIMENSIONS in millimeters 1.75 7.5 0.3 Ø 1.5 min. Ø 1.5 Drawing-No.: 9.700-5341.01-4 Issue: 3; 06.10.15 technical drawings according to DIN specifications Direction of feed

www.vishay.com Vishay Semiconductors Rev. 2.2, 21-Feb-17 6 Document Number: 80125 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TAPING VERSION TSOP..TT1, TSOP..TT2 (TOP VIEW) DIMENSIONS in millimeters Leader and trailer tape: Parts mounted Empty trailer 200 mm min. Empty leader 400 mm min. Direction of pulling out Unreel direction Ø 60 min. Ø Y 2 ± 0.5 Label posted here coming out from reel Tape position (12.4) 18.4 max. Ø 13 ± 0.2Ø 21 ± 0.8 100 mm min. with cover tape X 2:1 Tape and reel dimensions: (2) (1.75) (5.5) 12 ± 0.3 (8) (4)(Ø 1.5) (0.3) Reel size "Y" TT1 Ø 180 ± 2 = 1800 pcs. TT2 Ø 330 ± 2 = 7000 pcs. (1.2) Technical drawings according to DIN specifications Not indicated tolerances ± 0.1Drawing-No.: 9.700-5347.01-4 Issue: 1; 14.11.11

www.vishay.com Vishay Semiconductors Rev. 2.2, 21-Feb-17 7 Document Number: 80125 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TAPING VERSION TSOP..TT1, TSOP..TT2 (TOP VIEW) DIMENSIONS in millimeters Tape and Reel dimensions: Reel size "Y" GS 08 Ø 180 ± 2 = 1500 pcs. GS 18 Ø 330 ± 2 = 5000 pcs. Unreel direction X Tape position coming out from reel2 ± 0.5 Not indicated tolerances ± 0.1 Ø 13 ± 0.2Ø 21 ± 0.8 Label posted here Ø Y Ø 60 min. 18.4 max. (12.4) Leader and trailer tape: Parts mounted Empty leader 400 mm min. 100 mm min. with cover tape Direction of pulling outEmpty trailer 200 mm min. Technical drawings according to DIN specifications X 2 : 1 Reel dimensions and tape Drawing-No.: 9.700-5380.01-4 Issue: 1; 28.10.13 (8) (2) (4)(Ø 1.5) (1.75)(0.3) (5.5) (12)

www.vishay.com Vishay Semiconductors Rev. 2.2, 21-Feb-17 8 Document Number: 80125 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TAPING VERSION TSOP..DF1P (SIDE VIEW) DIMENSIONS in millimeters Drawing-No.: 9.800-5052.V3-4 Issue: 1; 17.12.02 Form of the leave open of the wheel is supplier specific. Dimensions according to IEC EN 60 286-3 Tape width: 24 Technical drawing according to DIN specifications Reel hub 2:1 Ø 20.2 min. 1.5 min. Ø 12.8 min. Ø 60 min. 24.4 Ø 330 Drawing-No.: 9.700-5399.01-4 Issue: 1; 30.06.16 (6.08) (1.5 min.) (12) (1.75) (11.5) (24) (5.25) (11.75) B B AA B - B A - A

www.vishay.com Vishay Semiconductors Rev. 2.2, 21-Feb-17 9 Document Number: 80125 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TAPING VERSION TSOP..TR (SIDE VIEW) DIMENSIONS in millimeters A-A (2 : 1) B-B (2 : 1) AA B B Direction of feed (1.75) (7.5) (16) (Ø 1) (2) (12) (4) Ø 1.5 (9.75) (2.8 (7.05) 1.7 Technical drawings according to DIN specification. Drawing-No.: GO-100220.10_Z Issue B: 08.02.17

www.vishay.com Vishay Semiconductors Rev. 2.2, 21-Feb-17 10 Document Number: 80125 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TAPING VERSION TSOP..TR (SIDE VIEW) DIMENSIONS in millimeters 16585

www.vishay.com Vishay Semiconductors Rev. 2.2, 21-Feb-17 11 Document Number: 80125 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TAPING VERSION TSOP..TR (SIDE VIEW) DIMENSIONS in millimeters Drawing-No.: 9.700-5337.01-4 Issue: 2; 06.10.15 1.75 7.5 3.6 0.3 Ø 1.5 min. Ø 1.5 Direction of feed 1.34 ref. technical drawings according to DIN specifications

www.vishay.com Vishay Semiconductors Rev. 2.2, 21-Feb-17 12 Document Number: 80125 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TAPING VERSION TSOP..TR (SIDE VIEW) DIMENSIONS in millimeters 1.75 7.5 3.6 0.3 Ø 1.5 Ø 1.5 Drawing-No.: 9.700-5342.01-4 Issue: 2; 12.06.13 technical drawings according to DIN specifications Direction of feed

www.vishay.com Vishay Semiconductors Rev. 2.2, 21-Feb-17 13 Document Number: 80125 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 LEADER AND TRAILER DIMENSIONS in millimeters COVER TAPE REEL STRENGTH According to DIN EN 60286-3 0.1 N to 1.3 N 300 mm/min. ± 10 mm/min. 165° to 180° peel angle LABEL Standard bar code labels for finished goods The standard bar code labels are product labels and used for identification of goods. The finished goods are packed in final packing area. The standard packing units are labeled with standard bar code labels before transported as finished goods to warehouses. The labels are on each packing unit and contain Vishay Semiconductor GmbH specific data. Trailer Leader no devices min. 200 min. 400 StartEnd devices 96 11818 no devices VISHAY SEMICONDUCTOR GmbH STANDARD BAR CODE PRODUCT LABEL (finished goods) PLAIN WRITING ABBREVIATION LENGTH Item-description - 18 Item-number INO 8 Selection-code SEL 3 LOT-/serial-number BATCH 10 Data-code COD 3 (YWW) Plant-code PTC 2 Quantity QTY 8 Accepted by ACC - Packed by PCK - Mixed code indicator MIXED CODE - Origin xxxxxxx+ Company logo LONG BAR CODE TOP TYPE LENGTH Item-number N 8 Plant-code N 2 Sequence-number X 3 Quantity N 8 Total length - 21 SHORT BAR CODE TOP TYPE LENGTH Selection-code X 3 Data-code N 3 Batch-number X 10 Filter - 1 Total length - 17

www.vishay.com Vishay Semiconductors Rev. 2.2, 21-Feb-17 14 Document Number: 80125 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DRY PACKAGING The reel is packed in an anti-humidity bag to protect the devices from absorbing moisture during transportation and storage. RECOMMENDED METHOD OF STORAGE Dry box storage is recommended as soon as the aluminum bag has been opened to preve nt moisture absorption. The following conditions should be observed, if dry boxes are not available:

  • Storage temperature 10 °C to 30 °C
  • Storage humidity ≤ 60 % RH max. After more than 72 h under these conditions moisture content will be too high for reflow soldering. In case of moisture absorption, the devices will recover to the former condition by drying under the following condition: 192 h at 40 °C + 5 °C / - 0 °C and < 5 % RH (dry air / nitrogen) or 96 h at 60 °C + 5 °C and < 5 % RH for all device containers or 24 h at 125 °C + 5 °C not suitable for reel or tubes. An EIA JEDEC ® standard JSTD-020 level 4 label is included on all dry bags. EIA JEDEC standard JSTD-020 level 4 label is included on all dry bags ESD PRECAUTION Proper storage and handling procedures should be followed to prevent ESD damage to the devices especially when they are removed from the antistatic shielding bag. Electrostatic sensitive devices warning labels are on the packaging. VISHAY SEMICONDUCTORS STANDARD BAR CODE LABELS The Vishay Semiconductors st andard bar code labels are printed at final packing areas. The labels are on each packing unit and contain Vishay Semiconductors specific data. OUTER PACKAGING The sealed reel is packed into a pizza box. Aluminum bag Label Reel 15973 CAUTION This bag contains MOISTURE-SENSITIVE DEVICES 1. Shelf life in sealed bag: 12 months at < 40 °C and < 90 % relative humidity (RH) 2. After this bag is opened, devices that will be subjected to soldering reflow or equivalent processing (peak package body temp. 260 °C) must be 2a. Mounted within 72 hours at factory condition of < 30 °C/60 % RH or 2b. Stored at < 5 % RH 3. Devices require baking befor mounting if: Humidity Indicator Card is > 10 % when read at 23 °C ± 5 °C or 2a. or 2b. are not met. 4. If baking is required, devices may be baked for: 192 hours at 40 °C + 5 °C/- 0 °C and < 5 % RH (dry air/nitrogen) or 96 hours at 60 °C ± 5 °C and < 5 % RH for all device containers or 24 hours at 125 °C ± 5 °C not suitable for reels or tubes Bag Seal Date: (If blank, see barcode label) Note: Level and body temperature defined by EIA JEDEC Standard J-STD-020 LEVEL 22522 16962 CARTON BOX DIMENSIONS in millimeters THICKNESS WIDTH LENGTH Pizza box (SMD and heimdall) (taping in reels) 50 340 340 Thickness Width 22127 Length

www.vishay.com Vishay Revision: 13-Jun-16 1 Document Number: 91000 Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA AR E SUBJECT TO CHANGE WITH OUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applicatio ns are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular applic ation. It is the customer’s responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different ap plications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s term s and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay product s not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.