TSS-13HLN MINI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Ultra High Dynamic Range, Shutdown Monolithic Amplifier Page 1 of 5 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits The Big Deal

  • Ultra-High IP3, +42.9 dBm typ.
  • Medium power, +28.4 dBm typ.
  • Excellent Noise Figure, 1.4 dB typ.
  • Shutdown feature Product Overview TSS-13HLN+ (RoHS compliant) is an advanced wideband amplifier with shutdown feature. It is fabricated using E-PHEMT technology and offers extremely high dynamic range over a broad frequency range and with low noise figure. In addition, the TSS-13HLN+ has good input and output return loss over a broad frequency range. TSS-13HLN+ is enclosed in a 3mm x 3mm, 12-lead MCLP package and has very good thermal performance. Key Features TSS-13HLN+ 50Ω 1MHz to 1 GHz Feature Advantages Broad Band: 1MHz to 1GHz Broadband covering primary wireless communications bands: VHF, UHF, Cellular Extremely High IP3 40.6 dBm typical at 1 MHz 42.9 dBm typical at 0.5 GHz The TSS-13HLN+ matches industry leading IP3 performance relative to device size and power consumption. The combination of the design and E-PHEMT Structure provides enhanced linearity over a broad frequency range as evidence in the IP3 being approximately 14-15 dB above the P1dB point. This feature makes this amplifier ideal for use in:
  • Driver amplifiers for complex waveform up converter paths
  • Drivers in linearized transmit systems
  • Secondary amplifiers in ultra-High Dynamic range receivers Shutdown feature Allow users to turn on and off the amplifier with pulsed signals while keeping the power supply at constant voltage to minimize DC power consumption Low Noise Figure 1.4 dB at 0.5 GHz Enables lower system noise figure performance and along with High OIP3 provides high dynamic range High P1dB, 28.4 dBm at 0.5 GHz High P1dB, High OIP3, Low NF results in a very dynamic range preventing amplifier saturation under strong interfering signals. CASE STYLE: DQ1225

Ultra High Dynamic Range, Shutdown Monolithic Amplifier Page 2 of 5 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits Product Features

  • High IP3, 42.9 dBm typ. at 0.5 GHz
  • Gain, 23 dB typ. at 0.5 GHz
  • Low noise figure, 1.4 dB at 0.5 GHz
  • High P1dB 28.4 dBm 0.5 GHz
  • Shutdown feature Typical Applications
  • Base station infrastructure
  • CATV
  • Cellular REV. OR M170906 TSS-13HLN+ GY/RS/CP 190212 General Description TSS-13HLN+ (RoHS compliant) is an advanced wideband amplifier with shutdown feature. It is fabricated using E-PHEMT technology and offers extremely high dynamic range over a broad frequency range and with low noise figure. In addition, the TSS-13HLN+ has good input and output return loss over a broad frequency range. TSS-13HLN+ is enclosed in a 3mm x 3mm, 12-lead MCLP package and has very good thermal performance. simplified schematic and pad description TSS-13HLN+ +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications

1 MHz to 1 GHz

Function Pin Number Description RF IN 3 RF Input RF-OUT and DC-IN 7 RF Output and DC Bias GND Paddle Connections to ground. NC 2, 4-6, 8-12 No connection, grounded externally VG 1 Control voltage for shutdown (VG) CASE STYLE: DQ1225

Monolithic E-PHEMT MMIC Amplifier Page 3 of 5 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits Electrical Specifications1 at 25°C & 50Ω, unless noted TSS-13HLN+ 1. Measured on Mini-Circuits Characterization test board TB-TSS-13HLN+. See Characterization Test Circuit (Fig. 1) 2. (Current at 95°C — Current at -45°C)/140 Parameter Condition (MHz) Amplifier-ON Amplifier-OFF Units VDD = 8V VDD = 8V Min. Typ. Max. Typ. Frequency Range 1 1000 1-1000 MHz Noise Figure 1 3 — dB 20 1.4 — 250 1.3 — 500 1.4 — 1000 1.6 — Gain 1 22.4 25 27.4 -24 dB 20 — 24.4 — -22 250 20.8 23.2 25.4 -21 500 — 23 — -22 1000 18.3 21.1 22.3 -26 Reversed Isolation 1-1000 26 27 dB Input Return Loss 1 11 12 dB 20 16 12 250 17 12 500 20 12 1000 14 10 Output Return Loss 1 11 1 dB 20 19 2 250 18 2 500 33 2 1000 12 2 Output Power @1dB compression AMP-ON 1 25.2 — dBm 20 26.7 — 250 28 — 500 28.4 — 1000 26.7 — Output IP3 (Pout = 0dBm/Tone) 1 — 40.6 — dBm 20 — 41.3 — 250 — 41.2 — 500 37.4 42.9 — 1000 — 40.8 — Device Operating Voltage (VDD) 7.6 8 8.4 8 V Device Operating Current (ID) 234 241 7.5 mA Control Voltage (VG) 0 5 V DC Current (ID) Variation Vs. Temperature2 -136 — uA/degC DC Current(ID) Variation Vs. Voltage 0.025 — mA/mV Thermal Resistance 23.3 — degC/W Absolute Maximum Ratings3 Parameter Ratings Operating Temperature (ground lead) -40°C to 95°C Storage Temperature -65°C to 150°C Total Power Dissipation 3.3W Input Power 28 dBm (5 minutes max.) 10 dBm (continuos) for 1- 30 MHz 18 dBm (continuos) for 0.03-1 GHz DC Voltage VDD 4 (Pad 7) 10V DC Voltage VG5 (Pad 1) 10V Control Voltage (VG) Fig. 1 Min. Typ. Max. Units Amplifier-ON — 0 0.7 V Amplifier-OFF 1.9 5 — V 3 Permanent damage may occur if these limits are exceeded. 4 Measured by keeping VG=0V. 5 Measured by keeping VDD=8V.

Monolithic E-PHEMT MMIC Amplifier Page 4 of 5 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits TSS-13HLN+ Characterization Test Circuit / Recommended Application Circuit Switching Specifications Parameter Min. Typ. Max. Units Amplifier ON to Shutdown OFF TIME (50% Control to 10% RF) — 5.3 — µs FALL TIME (90 to 10% RF) — 7.3 — Amplifier Shutdown to ON ON TIME (50% Control to 90% RF) — 77.7 — µs RISE TIME (10% to 90% RF) — 54.2 — Control Voltage Leakage — 633.3 — mV Marking may contain other features or characters for internal lot control Product Marking MCL TS23 black body model family designation index over pin 1 Fig 1. Block diagram of Test Circuit used for characterization. (DUT soldered on Mini-Circuits Characterization test board TB-TSS-13LN+) Gain, Return loss, Output power at 1dB compression (P1dB) , output IP3 (OIP3) and noise figure measured using Agilent’s N5242A PNA-X microwave network analyzer. Conditions: 1. Gain and Return Loss: Pin= -25dBm 2. Output IP3 (OIP3): Two tones, spaced 1 MHz apart, +0dBm/tone at output. 3. Switching Time RF Signal: Pin=-25 dBm, fRF=500 MHz. VDD=8V DC, VG=Pulse signal at 1 KHz with VHIGH=5V, VLOW=0V, 50% duty cycle.

Monolithic E-PHEMT MMIC Amplifier Page 5 of 5 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ESD Rating Human Body Model (HBM): Class 1A (Pass 250 V) in accordance with ANSI/ESD STM 5.1 - 2001 Additional Detailed Technical Information additional information is available on our dash board. To access this information click here Performance Data Data Table Swept Graphs S-Parameter (S2P Files) Data Set (.zip file) Case Style DQ1225 Plastic package, exposed paddle lead finish: Matte-Tin Tape & Reel F66 Standard quantities available on reel 7” reels with 20, 50, 100, 200, 500 or 1K devices Suggested Layout for PCB Design PL-623 Evaluation Board TB-TSS-13HLN+ Environmental Ratings ENV08T9 Visual Inspection Electrical Test SAM Analysis Reflow 3 cycles, 260°C Soak 85°C/85RH 168 hours Bake at 125°C, 24 hours Visual Inspection Electrical Test SAM Analysis Start MSL Test Flow Chart Stop TSS-13HLN+ Additional Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp