TPSPU10 TOTAL-POWER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Electrical Characteristics: TPSPU10 SERIES 10W Wall Mount Switching Power Supplies For I.T.E. Description: Features: Sym. Parameter Test Conditions Min. Typ. Max. Unit Vin Input Voltage Operating Voltage 90 264 VAC fin Input Frequency 47 63 Hz Po Output Power Range Vin=90 to 264VAC 0 10 W Vo Output Voltage Range See rating chart V Io Output Current Range See rating chart A Iil Input Current (Low Line) Io=Full load, Vin=115VAC 0.3 A Iih Input Current (High Line) Io=Full load, Vin=230VAC 0.2 A Irl Low Line Inrush Current Io=Full load, 25c, Cool start, Vin=115VAC 20 30 A Irh High Line Inrush Current Io=Full load, 25c, Cool start, Vin=230VAC 45 60 A Eff Efficiency Io=Full Load, Vin=230VAC 75 80 85 % REG-i Line Regulation Io=Full Load 0.5 1 % REG-o Load Regulation Vin=230VAC 3 5 % OVP Over Voltage Protection Nil % OCP Over Current Protection Nil But,Output protected to short circuit conditions % Ttr Time of Transient Response Io=Full Load to Half Load, Vin=100VAC 4 mS Thold Hold-Up Time Io=Full Load, Vin=100VAC 5 10 mS Ts Start Up Time Io=Full Load, Vin=100VAC 0.3 1 2 S Vrn Ripple & Noise(Peak to Peak) Full Load, Vin=90VAC 0.5 1 % Ilk Safety Ground Leakage Current Io=Full Load, Vin=240VAC 0.2 0.25 mA TC Temperature Coefficient All output -0.04 0.04 %/c Safety Approvals: Wide Input Voltage 90 to 264 VAC,47 to 63 Hz

2 Prong Plug-In Mains Connector

Output Voltage Available From 5VDC Thru 40VDC Optional Output Connector (See appendix) Single Output Class II 2 year warranty The 10 series of AC/DC switching mode power supplies provide 10 Watts of continuous output power. All supplies are UL 94V-0 min compliant, include a 2 prong plug-in mains connector for certain applications. All models All models meet FCC class B and are designed to comply with UL/c-UL requirements. All units are 100% burned in and tested. Environmental : Hr Relative Humidity 5 95 % Toper Operating Temperature Tstg Storage Temperature Pd 0 70 85 -40 Sym. Parameter Min. Typ. Max. Unit Derate linearly from 100% load at 40 C to 50% load at 70 C Test Conditions C C No-Condensing Hrs M MTBF Operating Temperature at 25 C, Calculated per MIL-HDBK-217F 0.1 S E P

10W Wall Mount Switching Power Supplies For I.T.E. Safety Specifications: Output Voltage And Current Rating Chart ( Single Output ) : Mechanical Specifications: Note: 1. Dimensions are shown in mm. 2. Weight: 90gs approx. 3. Optional output connector: See page Appendix. Parameter Test Conditions Min. Typ. Max. Unit Dielectric Withstanding Voltage for Primary to secondary Primary to secondary 4242 VDC Sym. Vps Vin=220VAC B CLASSCISPR FCC EMI requirements for CISPR-22 Vin=110VAC B CLASSEMI requirements for FCC PART-15 Model Number Output Voltage Output Current Total Regulation Maximum Output Power TPSPU10-102 5 ~ 6 VDC 1.60 ~ 1.33 A 5% 8W TPSPU10-103 6 ~ 8 VDC 1.33 ~ 1.00 A 5% 8W TPSPU10-104 8 ~ 11 VDC 1.25 ~ 0.91 A 5% 10W TPSPU10-105 11 ~ 13 VDC 0.91 ~ 0.77 A 5% 10W TPSPU10-106 13 ~ 16 VDC 0.77 ~ 0.63 A 5% 10W TPSPU10-107 16 ~ 21 VDC 0.63 ~ 0.48 A 3% 10W TPSPU10-108 21 ~ 27 VDC 0.48 ~ 0.37 A 3% 10W TPSPU10-109 27 ~ 33 VDC 0.37 ~ 0.30 A 3% 10W TPSPU10-110 33 ~ 40 VDC 0.30 ~ 0.25 A 3% 10W The total regulation on model 102~105 is required to use AWG#20 / 4FT output cable. The total regulation on model 106~110 is required to use AWG#24 / 4FT output cable. The regulation and efficiency will be changed by modified output cable.