TSP1-BF1608H6-L1M2Y TAITRON | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 9
Technical content
Features
- Package in 8mm tape on 7" diameter reel
- Compatible with automatic placement equipment
- Compatible with infrared and vapor phase reflow solder process
- Mono-color type
- RoHS Compliant
Applications
- Backlighting in dashboard and switch
- Telecommunication: indicator and backlighting in telephone and fax
- Flat backlight for LCD, switch and symbol
- General use Descriptions
- The TSP1 SMD Taping is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained.
- Besides, lightweight makes them ideal for miniature applications. etc. Device Selection Guide Chip Part No. Material Emitted Color Lens Color TSP1-BF1608H6-L1M2Y InGaN Blue Water Clear QSLP1BF1
Rev. A/WW 2006-02-10 www.taitroncomponents.com Page 2 of 9 TSP1-BF1608H6-L1M2Y Absolute Maximum Ratings (Tamb=25°C) Parameter Symbol Value Unit Reverse Voltage VR 5 V Forward Current IF 25 mA Operating Temperature Topr -40 ~ +85 °C Storage Temperature Tstg -40 ~ +90 °C Reflow soldering: 260 (for 10 seconds) Soldering Temperature Tsol Hand soldering: 350 (for 3 seconds) Electrostatic Discharge (HBM) ESD 150 V Power Dissipation Pd 110 mW Peak Forward Current (Duty 1/10 @1KHz) IFP 100 mA Electro-Optical Characteristics (Tamb=25°C) Parameter Symbol Min. Typ. Max. Unit Condition Luminous Intensity IV 11.5 ----- 28.5 mcd Viewing Angle 2θ1/2 ----- 120 ----- deg Peak Wavelength λp ----- 468 ----- nm Dominant wavelength λd 465 ----- 475 nm Spectrum Radiation Bandwidth △λ ----- 25 ----- nm Forward Voltage VF 2.5 ----- 3.1 V IF =5mA Reverse Current IR ----- ----- 50 µA VR=5V Notes: 1. Tolerance of Luminous Intensity is ±10% 2. Tolerance of Dominant Wavelength is ±1nm 3. Tolerance of Forward Voltage is ±0.1V
Rev. A/WW 2006-02-10 www.taitroncomponents.com Page 3 of 9 TSP1-BF1608H6-L1M2Y Spectrum Distribution Wavelength λp(nm) Luminous Intensity vs. Forward Current (Ta =25°C) Forward Current IF (mA) Forward Current Derating Curve Ambient Temperature Ta (°C) Typical Electro-Optical Characteristics Curves Luminous Intensity vs. Ambient Temperature Ambient Temperature Ta (°C) Forward Current IF (A) Radiation Diagram Relative luminous intensity (%) Relative luminous intensity (%) Forward Current vs. Forward Voltage Forward Voltage (VF)-volts Forward Current IF(mA) Relative luminous intensity (%)
Rev. A/WW 2006-02-10 www.taitroncomponents.com Page 4 of 9 TSP1-BF1608H6-L1M2Y Reliability Test Items and Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items Test Condition Test Hours / Cycles Sample Size Ac/Re 1 Reflow Soldering Temp.: 260°C ±5°C Min. 5sec. 6 Min. 22 PCS. 0/1
2 Temperature Cycle
H: +100°C 15min ∫ 5 min L: -40°C 15min 300 Cycles 22 PCS. 0/1
3 Thermal Shock
H: +100°C 5min ∫ 10 sec L: -10°C 5min 300 Cycles 22 PCS. 0/1 4 High Temperature Storage Temp .: 100°C 1000 Hrs. 22 PCS. 0/1 5 Low Temperature Storage Temp.: -40°C 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life I F = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85°C / 85%RH 1000 Hrs. 22 PCS. 0/1
Rev. A/WW 2006-02-10 www.taitroncomponents.com Page 5 of 9 TSP1-BF1608H6-L1M2Y Package Dimensions (In mm) - + Note: The tolerances unless mentioned is ±0.1mm
Rev. A/WW 2006-02-10 www.taitroncomponents.com Page 6 of 9 TSP1-BF1608H6-L1M2Y Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel Note: The tolerances unless mentioned is ±0.1mm, Unit = mm Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm, Unit = mm
Rev. A/WW 2006-02-10 www.taitroncomponents.com Page 7 of 9 TSP1-BF1608H6-L1M2Y See Code Table Convex Taitron SMD LED PCB Type Flat Top Size in mm Factory Location Code Blue Height <=0.6mm Lead Free Tape & Reel 7=7˝ reel 1=3k per reel Special Test Condition: IF=5mA
Ordering Information
TSP 1- B F 1608 H6 –L1M2 Y-92-TR71 Code Range of Dominant Wavelength Code Min. Max. Unit Condition X 465.0 470.0 Y 470.0 475.0 nm IF=5mA Code Range of Luminous Intensity Code Min. Max. Unit Condition L1 11.5 14.5 L2 14.5 18.0 M1 18.0 22.5 M2 22.5 28.5 mcd IF=5mA Code Range of Forward Voltage Code Min. Max. Unit Condition 9 2.5 2.7 10 2.7 2.9 11 2.9 3.1 V IF=5mA Notes: 1. Tolerance of Luminous Intensity is ±10% 2. Tolerance of Dominant Wavelength is ±1nm 3. Tolerance of Forward Voltage is ±0.1V
Rev. A/WW 2006-02-10 www.taitroncomponents.com Page 8 of 9 TSP1-BF1608H6-L1M2Y Precautions for Use 1. Over-current-proof Customer must apply resistors for protection; otherwise slight voltage shift will cause big current change (Burn out will happen). 2. Storage 2.1 Do not open moisture proofs bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30°C or less and 90% RH or less. 2.3 The LEDs should be used within a year. 2.4 After opening the package, The LEDs should be kept at 30°C or less and 70% RH or less. 2.5 The LEDs should be used within 168 hours (7 days) after opening the package.
2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions. Baking treatment: 60±5°C for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 280°C for 3 seconds within. Once in less than the soldering iron capacity 25W, leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
Rev. A/WW 2006-02-10 www.taitroncomponents.com Page 9 of 9 TSP1-BF1608H6-L1M2Y How to contact us: US HEADQUARTERS
28040 WEST HARRISON PARKAWAY, VALENCIA, CA 91355-4162
Tel: (800) TAITRON (800) 247-2232 (661) 257-6060 Fax: (800) TAITFAX (800) 824-8329 (661) 257-6415 Email: taitron@taitroncomponents.com Http://www.taitroncomponents.com TAITRON COMPONENTS MEXICO, S.A .DE C.V. BOULEVARD CENTRAL 5000 INTERIOR 5 PARQUE INDUSTRIAL ATITALAQUIA, HIDALGO C.P.
42970 MEXICO
Tel: +52-55-5560-1519 Fax: +52-55-5560-2190 TAITRON COMPONETS INCORPORATED, SHANGHAI REPRESENTATIVE OFFICE CROSS REGION PLAZA, 899 LINGLING ROAD, SUITE 18C, SHANGHAI, 200030, CHINA Tel: +86-21-5424-9942 Fax: +86-21-5424-9931 TAITRON COMPONETS INCORPORATED E REPRESENTAÇÕES DO BRASIL LTDA RUA DOMINGOS DE MORAIS, 2777, 2.ANDAR, SALA 24 SAÚDE - SÃO PAULO-SP 04035-001 BRAZIL Tel: +55-11-5574-7949 Fax: +55-11-5572-0052