TSOP08A1003AR AAC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

American Accurate Components, Inc. TSOP Series Ultra Precision Molded Resistor Networks The content of this specification may change without notification 1/01/06

188 Technology Drive, Unit H, Irvine, CA 92618

TEL: 949-453-9888 Š FAX: 949-453-8889 Custom solutions are available. HOW TO ORDER TSOP 08 A 1003 B C TCR (PPM/°C) R = +5 S = + 10 E = +25 C = + 50 Resistance Tolerance A = +.05 B = + .10 C = +.25 Resistance Value 3 sig. fig & 1 multiplier +1% Circuit Type/Pattern Refer to Circuit Schematic A, B, C, D, E Pins 8, 14,16, 20 Series Ultra Precision Molded Resistor

FEATURES

„ TSOP High Precision NiCr Thin Film Resistor Networks with tight ratio and tracking „ 10 Standard Circuits „ Excellent to relative Tolerance and TCR „ High Stability Thin Film „ 2.3mm High from PC Board, most fit for high density compacted instruments. „ Custom Circuit Configuration is Available ELECTRICAL SPECIFACTIONS Rated Power per Resistor at 70ºC 60mW Maximum Working Voltage 75V Maximum Overload Voltage 150V Absolute TCR ppm/ºC 50, 25,10, 5 Absolute Tolerance % 0.25, 0.1, 0.05 TSOP 08 SCHEMATIC TSOP 08 TSOP 16 MECHANICAL SPECIFACTIONS Mechanical Protection Epoxy Molded Resistive Element NiCr Film Terminal Leads Tinned TYPICAL PERFORMANCE ABS TRACKING ± 5ppm 1, 2, 3, 5 ± 10ppm 1, 2, 3, 5, 10 ± 25ppm 1, 2, 3, 5, 10 T C R ± 50ppm 1, 2, 3, 5, 10 ABS RATIO O L DIMENSIONS (mm) Model A B C D E F G H

American Accurate Components, Inc. TSOP Series Ultra Precision Molded Resistor Networks The content of this specification may change without notification 1/01/06 TEL: 949-453-9888 Š FAX: 949-453-8889 CIRCUIT SPECIFICATION Circuit Symbol A B C D E TSOP 08 Circuit Layout Options CIRCUIT SPECIFICATION – 16 PINS Circuit Symbol A B C TSOP 16 Circuit Layout Options Circuit Symbol D E TSOP 16 Circuit Layout Options Resistance Range (Ω) 50.0 ~ 22K 500 ~ 10.0K PERFORMANCE TEST TEST METHOD REQUIREMENTS Operating Temperature Range -55ºC ~ 155ºC Short Time Overload 2.5 x rated voltage for 5 seconds ± (0.02% + 0.01Ω) Temperature Cycle -55ºC ~ 155ºC for 5 cycles ± (0.02% + 0.01Ω) Resistance to Solder Heat 250ºC for 10 seconds ± (0.02% + 0.01Ω) Moisture Resistance Load Life 40°C, 90 ~ 95% R.H. rated voltage, 1,000 hours ± (0.02% + 0.01Ω) Load Life at 70°C 70 °C, rated voltage, 1.5 hours on, 0.5 hours off, 1,000 hours ± (0.02% + 0.01Ω)