TSN MSYSTEM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
MODEL: TSN TSN SPECIFICATIONS ES-3319 Rev.7 Page 1/2 http://www.m-system.co.jp/ Super-mini Two-wire Signal Conditioners T-UNIT INPUT LOOP POWERED ISOLATOR Functions & Features
- Loop-powered design eliminates output loop power supply
- 500 V DC input-to-output isolation
- Highdensity mounting Typical Applications
- Isolation between control room and field instrumentation, between telemetering system and input device
- Eliminates ground problems in existing systems thanks to easiness of application without requiring additional power wiring ZERO SPAN 25 (.98) (2.76) (2.36) mm (inch) MODEL: TSN–[1]
ORDERING INFORMATION
- Code number: TSN-[1] Specify a code from below for [1]. (e.g. TSN-H6) [1] INPUT / OUTPUT blank: 4 – 20 mA DC / 1 – 5 V DC H6: 10 – 50 mA DC / 1 – 5 V DC GENERAL SPECIFICATIONS Construction: Stand-alone; terminal access at the front Connection: Euro type terminal (applicable wire size: 0.25 to 1.5 mm2, stripped length 7 mm) Housing material: Flame-resistant resin (black) Isolation: Input to output Zero adjustment: -5 to +5 % (front) Span adjustment: 95 to 105 % (front) INPUT & OUTPUT ■ Input 4 – 20 mA DC / OUTPUT 1 – 5 V DC Equivalent input impedance: Approx. 250 Ω with 20 mA input Operational range: 3 – 22 mA DC (Accuracy is assured within 4 – 22 mA) Load resistance: 50 kΩ min. ■ Input 10 – 50 mA DC / OUTPUT 1 – 5 V DC Equivalent input impedance: Approx. 100 Ω with 50 mA input Operational range: 7 – 55 mA DC (Accuracy is assured within 8 – 55 mA) Load resistance: 50 kΩ minimum
- INPUT 4 – 20 mA DC / OUTPUT 1 – 5 V DC INPUT CURRENT [mA] 4 12 20 5.0 approx. 3.7 VOLTAGE [V] ACROSS INPUT TERMINALS 3.0 approx. 5.0 4.0
- INPUT 10 – 50 mA DC / OUTPUT 1 – 5 V DC INPUT CURRENT [mA] 10 30 50 5.0 approx. 3.7 VOLTAGE [V] ACROSS INPUT TERMINALS 3.0 approx. 5.0 4.0 INSTALLATION Operating temperature: -5 to +60°C (23 to 140°F) Operating humidity: 30 to 90 %RH (non-condensing) Mounting: Surface or DIN rail Weight: 120 g (0.26 lb) PERFORMANCE in percentage of span Accuracy: ±0.1 % Temp. coefficient: ±0.015 %/°C (±0.008 %/°F) Response time: ≤ 0.5 sec. (0 – 90 %) Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 500 V AC @ 1 minute (input to output)
MODEL: TSN TSN SPECIFICATIONS ES-3319 Rev.7 Page 2/2 http://www.m-system.co.jp/ EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch) EURO TYPE TERMINALS DIN RAIL 35mm wide 18 (.70) 25 (.98) 53 (2.08) 60 (2.36) 60 (2.36) 4 (.15) 2–4.4 (.17) dia. MTG HOLE
- When mounting, no extra space is needed between units. SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM INPUT Chopper Buffer Amplifier Z S OUTPUT Inverter Rectifier Specifications are subject to change without notice.