TSM600-250F

AGRF400_1 MACOM | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 18

Technical content

PolySwitch™ Resettable Device Short Form Catalog MAY 2005 www.circuitprotection.com

For over 20 years, Raychem Circuit Protection, a unit of Tyco Electronics, has pioneered the technology behind PolySwitch™ PPTC (Polymeric Positive Temperature Coefficient) devices. The use of PPTC devices as a variable resistor in circuit protection applications was first pioneered by Raychem several decades ago. They were first used to help protect nickel-cadmium battery packs against excessive discharge and are still being used in that application today. Raychem Circuit Protection PolySwitch devices are commonly called resettable devices to distinguish them from traditional one-shot fuses that work only once and then must be replaced—an expensive and inconvenient proposition. While the generic term for these devices is “resettable fuses”, technically they are not fuses but actually non-linear thermistors. Designed for use in a wide range of electronic devices, these thermistor-type devices limit the flow of dangerously high current during fault conditions. But unlike traditional fuses that work one time and must be replaced, Raychem Circuit Protection’s PPTC devices reset after the fault is cleared and power to the circuit is removed. This reduces service and repair costs, resulting in improved customer satisfaction and reduced warranty costs. To date, billions of PolySwitch products are used to help protect a wide range of electronic products in automotive, battery and portable electronics, computer and peripherals, consumer, industrial, and telecommunication markets. In addition, Raychem Circuit Protection continues to expand their circuit protection offerings with Telecom Fuses, ROV Radial-leaded Metal Oxide Varistors, SiBar™ Thyristor surge protectors, Raychem Gas Discharge Tubes for overvoltage protection, and most recently, Polymer electrostatic discharge (PESD) protection devices. Raychem Circuit Protection is recognized as a leader for operational excellence and customer service. A dedicated direct engineering sales force, world-wide manufacturing and design centers, and local engineering support help them to think, manage and share globally, yet act locally, to meet customer needs. They are in compliance with globally recognized ISO9000 standards and certified to QS9000 standards. The division is headquartered in Menlo Park, CA with manufacturing facilities in California (USA), China, and Japan, with sales offices worldwide. For the latest product information please visit us at: www.circuitprotection.com www.circuitprotection.com.hk (Chinese) www.raychem.co.jp/polyswitch (Japanese) Americas: (800) 227-7040 or (650) 361-6900 Europe: 32-16-35 1321 Asia Pacific: 852-2738-3401 Japan: 81-44-900-5110

PolySwitch Resettable Device Benefits:

• Reduced warranty and service costs
• Increased reliability
• Superior shock and vibration withstand
• Wide variety of applications Features:
• Remotely resettable
• Testable
• Solid-state
• Variety of form factors
• Low resistance devices available Automotive
• Actuators and medium motors
• Trace protection
• Powered outputs
• Electronic control modules
• Telematics Battery Protection
• Lithium cells and battery packs
• Rechargeable battery packs
• Chargers Computers and Peripherals
• DDC.2 computer video ports
• Hard disk drives/storage devices
• IEEE 1394 ports
• Mouse and keyboard ports
• USB (Universal Serial Bus) ports
• PC (PCMCIA) cards and sockets
• SCSI Industrial
• MOSFET device protection
• Motors, fans, and blowers
• POS equipment
• Process and industrial controls
• Security and fire alarm systems
• Test and measurement equipment
• Transformers
• Power supplies Consumer
• Loudspeakers
• Satellite video receivers Telecommunications & Networking
• Central office equipment
• Customer premise equipment
• Primary protection: MDF modules, Network Interface Devices (NIDs)
• xDSL modems and ISDN equipment
• WAN, LAN, T1/E1 equipment
• Cable power passing taps
• UL 60950, Telcordia GR-1089, GR-974 compliant equipment
• Equipment compliant with ITU-T K.20, K.21, K.45 resistibility recommendations
• Distributed power supplies What’s New Inside:
• Radial-leaded Products - RoHS compliant RHE
• Surface-mount Products - RoHS compliant nanoSMD - RoHS compliant microSMD - RoHS compliant miniSMD - RoHS compliant decaSMD - RoHS compliant SMDH
• Automotive Products - RoHS compliant AHR
• Telecom Products - RoHS compliant TR600 - RoHS compliant TS600 - RoHS compliant TSM600 PolySwitch devices can be used in a wide variety of applications:

DEVICES FOR AUTOMOTIVE APPLICATIONS Dimensions (millimeters/inches) * Hold current @ 25°C. The AGRF, AHRF, AHS and ASMD series devices are qualified to operate in automotive environments per the AEC-Q200 Stress Test Qualification for Passive Electronics in automotive applications. This specifi- cation requires devices to pass a rigorous test plan designed for automotive environments. Raychem Circuit Protection’s document is PS400.AHRF: High Temp Radial-leaded ELV Compliant, RoHS Compliant AGRF: Radial-leaded ELV Compliant, RoHS Compliant Dimensions (millimeters/inches) * Hold current @ 25°C. AHS: High Temp Surface-mount ELV Compliant, RoHS Compliant Dimensions (millimeters/inches) ASMD: Surface-mount ELV Compliant Dimensions (millimeters/inches) B A Side view C End view C End view (AHS080 only) Figure 1 Lead size AGRF1200-1400, AHRF1300-1500 Ø 1.0 (0.04)

18 AWG C

A B Figure 2 Lead size AGRF400-1100, AHRF450-1000 Ø 0.81 (0.032)

20 AWG

240V ELV Compliant, RoHS Compliant RADIAL-LEADED DEVICES FOR ELECTRONICS APPLICATIONS Lead size LVR005-016 Ø 0.51 (0.020)

24 AWG

B CALIPER A CALIPER C center-to-center B CALIPER A CALIPER C center-to-center Lead size LVR025–040 Ø 0.64 (0.025)

22 AWG

Ø 0.81 (0.032) A B C center-to-center B CALIPER A CALIPER C center-to-center Figure 4 Dimensions (millimeters/inches) I max. Part I H IT V max. 135Vac/240Vac R 1max. Agency A B C number (A) (A) (Vac) (A) ( Ω) recognition (max.) (max.) (nom.) Fig. The LVR series is the first PolySwitch device family designed for use at line voltages of 120VAC to 240VAC. They may be used to help provide primary side protection of chargers, power supplies, and con- trol transformers in many industrial, commercial and consumer applications. They are also appropriate to help protect many 120V AC or 240VAC motors. In addition, the LVR series is RoHS compliant. 60V – 72V ELV Compliant, RoHS Compliant Dimensions (millimeters/inches) Part I H IT V max. I max. R1max. Agency A B C number (A) (A) (V) (A) ( Ω) recognition (max.) (max.) (nom.) Fig. Device may withstand higher interrupt current at lower voltages. Each application will need to be individually evaluated. The RXEF series devices offer hold currents ranging from 50mA to 3.75A while offering voltage ratings of 60V to 72V. The RXEF products are used in a wide range of applications such as power input, and I/O port protection. They are also used in many markets including computer/multimedia, industrial equipment and controls, consumer, general electronics and com- munications and networking. Lead size RXEF110-375 Ø 0.81 (0.032) A B C A B C Lead size RXEF005 Ø 0.40 (0.016)

26 AWG

RXEF010–090 Ø 0.51 (0.020) A B C

RADIAL-LEADED DEVICES FOR ELECTRONICS APPLICATIONS 30V ELV Compliant, RoHS Compliant Dimensions (millimeters/inches) Part I H IT V max. I max. R1max. Agency A B C number (A) (A) (V) (A) ( Ω) recognition (max.) (max.) (nom.) Fig. Device may withstand higher interrupt current at lower voltages. Each application will need to be individually evaluated. 33V ELV Compliant, RoHS Compliant Dimensions (millimeters/inches) Part I H IT V max. I max. R1max. Agency A B C number (A) (A) (V) (A) ( Ω) recognition (max.) (max.) (nom.) Fig. Device may withstand higher interrupt current at lower voltages. Each application will need to be individually evaluated. Figure 9 A B C Lead size RUEF090–250 Ø 0.51 (0.020) A B C Lead size RUEF300–900 Ø 0.81 (0.032) The RTEF series devices offer a 33V rating and tighter trip-to-hold ratios than other radial-leaded devices to help comply with the IEEE 1394 specifi- cation. These devices can also be used in other applications where the benefit of a tighter trip-to- hold ratio is desired. The RUEF series devices offer hold currents from 900mA to 9.0A. They are used in many markets including computer/multimedia, industrial equipment and controls, as well as consumer and general electronics. Lead size RTEF120–190 Ø 0.51 (0.020) A B C

RADIAL-LEADED DEVICES FOR ELECTRONICS APPLICATIONS 16V High Temperature ELV Compliant, RoHS Compliant 16V High Temperature ELV Compliant, RoHS Compliant Dimensions (millimeters/inches) Part I H* IT V max. I max. ** R1max. Agency A B C number (A) (A) (Vdc) (A) ( Ω) recognition (max.) (max.) (nom.) Fig. RHEF 30V RHEF 16V * Hold current @ 25°C. ** Device may withstand higher interrupt current at lower voltages. Each application will need to be individually evaluated. Dimensions (millimeters/inches) Part I H* IT V max. I max. ** R1max. Agency A B C number (A) (A) (Vdc) (A) ( Ω) recognition (max.) (max.) (nom.) Fig. * Hold current @ 25°C. ** Device may withstand higher interrupt current at lower voltages. Each application will need to be individually evaluated. New New New New Figure 13 A B C Lead size RHEF400-1000 Ø 0.81 (0.032) RHEF1300, RHEF1500 Ø 1.0 (0.04)

18 AWG

A B C Lead size RHEF050, 100, 200 Ø 0.51 (0.020) Ø 0.51 (0.020) A B C Figure 15 A B C Lead size RGEF300-RGE1100 Ø 0.81 (0.032) Ø 1.0 (0.04) The RHEF series devices offer a high operating tem- perature (up to 125C) and the broadest range of hold currents available in the radial-leaded form factor (70mA to 15A). The RHEF series devices can also be advantageous for use in standard operating tempera- tures of up to 85C because they have a flatter thermal derating curve than other radial-leaded devices. Over the same temperature range, the trip-to-hold ratio is lower for an RHEF device compared with other PPTC devices. The RGEF series devices are rated for 16V and have hold current ranges of 2.5A to 14A. These parts are smaller and trip faster than the RUEF devices with the same hold currents. In addition, they have tight trip-to- hold ratios. If the application requires 16V rather than 30V and there are limitations on space, the RGEF devices can be the preferred choice. Like the RXEF and RUEF series devices, the RGEF devices are used in many markets including computer/multimedia, industrial equipment and controls, consumer and general electronics, as well as motor protection. Lead size RHEF070 Ø 0.51 (0.020) A B C

RADIAL-LEADED DEVICES FOR ELECTRONICS APPLICATIONS 16V High Temperature ELV Compliant, RoHS Compliant Dimensions (millimeters/inches) Part I H IT V max. I max. R1max. Agency A B C number (A) (A) (V) (A) ( Ω) recognition (max.) (max.) (nom.) Fig. Device may withstand higher interrupt current at lower voltages. Each application will need to be individually evaluated. 6V ELV Compliant, RoHS Compliant Dimensions (millimeters/inches) Part I H IT V max. I max. R1max. Agency A B C number (A) (A) (V) (A) ( Ω) recognition (max.) (max.) (nom.) Fig. Device may withstand higher interrupt current at lower voltages. Each application will need to be individually evaluated. Figure 17 A B C Lead size Ø 0.51 (0.020) The RUSBF series devices were developed for the USB serial bus specification in computer and multi- media applications. The RUSBF series devices were developed for the USB serial bus specification in computer and multi- media applications. These 6V products are particular- ly well suited for USB computer monitor protection applications where through-hole devices are still the preferred solution. Lead size Ø 0.51 (0.020) A B C

TELECOM AND BROADBAND PRODUCTS Figure 1 Figure 2 TR250 A B E φ 0.65mm C B Dφ 0.65mm A E These product lines consist of radial-leaded and surface-mount devices that help protect against short duration high voltage faults (250-600Vrms). TR and TS products are designed to help meet the protection needs of telecommunications applications. BBR devices help provide overcurrent protection of the power tap in hybrid-coaxial applications. number (A) (A) (Vdc) (Vrms) (A) ( Ω)( Ω)( Ω) recognition Fig. These products are intended for telecom applications. For continuous line voltage applications, see LVR product line. Please see the Raychem Circuit Protection Databook for application details. Most products are available in binned versions for resistance-matched applications. Please see Raychem Circuit Protection Databook for performance details. † F is for RoHS compliant devices. Dimensions (millimeters/inches) P a r t ABCDE

TELECOM AND BROADBAND PRODUCTS TR600 Figure 6 A C B E φ 0.65mm D TS250 Figure 3 Figure 4 Figure 5 C top view D A B side view C E D A B C E D A B New number (A) (A) (Vdc) (Vrms) (A) ( Ω)( Ω)( Ω) recognition Fig. These products are intended for telecom applications. For continuous line voltage applications, see LVR product line. Please see the Raychem Circuit Protection Databook for application details. Most products are available in binned versions for resistance-matched applications. Please see Raychem Circuit Protection Databook for performance details. number (A) (A) (Vdc) (Vrms) (A) ( Ω)( Ω)( Ω) recognition Fig. These products are intended for telecom applications. For continuous line voltage applications, see LVR product line. Please see the Raychem Circuit Protection Databook for application details. Most products are available in binned versions for resistance-matched applications. Please see Raychem Circuit Protection Databook for performance details. * These parts are RoHS compliant. TRF600-150 replaces TR600-150 and TR600-150-RA devices in new designs. TRF600-150-RB replaces TR600-150-RB devices in new designs. Dimensions (millimeters/inches) P a r t ABCD Dimensions (millimeters/inches) P a r t ABCDE Dimensions (millimeters/inches) P a r t ABCDE * This part is RoHS compliant and replaces TR600-150 and TR600-150-RA devices in new designs. Coming Soon Coming Soon Coming Soon Coming Soon Coming Soon Coming Soon Coming Soon Coming Soon Coming Soon Coming Soon Coming Soon Coming Soon

TELECOM AND BROADBAND PRODUCTS TS600 Figure 7 Figure 8 BBR Figure 9 A B D C Lead size Ø 0.81 (0.032) C E G D F D A B E New New New New New New New New number (A) (A) (Vdc) (Vrms) (A) ( Ω)( Ω)( Ω) recognition Fig. These products are intended for telecom applications. For continuous line voltage applications, see LVR product line. Please see the Raychem Circuit Protection Databook for application details. * These parts are the RoHS compliant versions; they should be used for new designs. Dimensions (millimeters/inches) P a r t ABC number (max.) (max.) (max.) Fig. * These parts are the RoHS compliant versions; they should be used for new designs. Dimensions (millimeters/inches) P a r t ABCDEFG number (A) (A) (Vdc) (A) ( Ω)( Ω)( Ω) recognition Fig. These products are intended for telecom applications. For continuous line voltage applications, see LVR product line. Please see the Raychem Circuit Protection Databook for application details. Dimensions (millimeters/inches) P a r t ABCD

SURFACE-MOUNT DEVICES FOR ELECTRONIC APPLICATIONS Dimensions (millimeters/inches) Part I H IT V max. I max. R min R1 m a x . A g e n c y ABCDE * Data is preliminary. nanoSMDC Series Size: 3216 (mm), 1206 (mils) ELV Compliant, RoHS Compliant Dimensions (millimeters/inches) Part I H IT V max. I max. R min R1 m a x . A g e n c y ABCDE microSMD Series Size: 3225 (mm), 1210 (mils) ELV Compliant, RoHS Compliant Dimensions (millimeters/inches) Part I H IT V max. I max. R min R1 m a x . A g e n c y ABCDE * Data is preliminary. miniSMDC Series Size: 4532 (mm), 1812 (mils) ELV Compliant, RoHS Compliant Coming Soon Coming Soon Coming Soon Coming Soon New New New New New New Figure 1 B C E D A Top view Side view E D Dimensions (millimeters/inches) Part I H IT V max. I max. R min R1 m a x . A g e n c y ABCDE miniSMDE Series Size: 11550 (mm), 4420 (mils) ELV Compliant, RoHS Compliant These product lines are designed for surface-mount applications. The variety of sizes enables installation in limited space applications such as crowded printed circuit boards, digital cameras, PC cards, subnotebook computers, computer peripheral equipment, and general electronics. These devices are designed for applications where such space is constrained and resettable circuit protection is desired.

SURFACE-MOUNT DEVICES FOR ELECTRONIC APPLICATIONS 1010 New New Dimensions (millimeters/inches) Part I H IT V max. I max. R min R1 max. Agency A B C number (A) (A) (Vdc) (A) ( Ω)( Ω) recognition (max.) (max.) (max.) Fig. SMD2 Series Size: 8763 (mm), 3425 (mils) ELV Compliant, RoHS Compliant Dimensions (millimeters/inches) Part I H IT V max. I max. R min R1 m a x . A g e n c y ABCDE midSMD Series Size: 5050 (mm), 2018 (mils) ELV Compliant, RoHS Compliant Dimensions (millimeters/inches) Part I H IT V max. I max. R min R1 max. Agency A B C number (A) (A) (Vdc) (A) ( Ω)( Ω) recognition (max.) (max.) (max.) Fig. SMD Series Size: 7555 (mm), 2920 (mils) ELV Compliant, RoHS Compliant Figure 2 B A Side view C End view (midSMD products only) C End view These product lines are also designed for surface- mount applications. The products range in hold cur- rents from 0.3A to 3.0A and voltages from 6V to 60V. These devices are suited for high-density board appli- cations in computer and computer peripheral products, telecommunications, and general electronics applica- tions. They are designed to be reflowed onto a printed circuit board using standard surface-mount processes.

• Operation beyond maximum ratings or improper use may result in device damage and possible electrical arcing and flame.
• These devices are intended for protection against occasional overcurrent or overtemper- ature fault conditions, and should not be used when repeated fault conditions are anticipated.
• TR and TS devices are not intended for contin- uous utility line voltage such as 120/220V or 240V.
• LVR Product Notes: 1. A PTC device is not a fuse—it is a nonlinear thermistor that limits current. Because under a fault condition all PTC devices go into a high resistance state but not open circuit, hazardous voltage may be present at PTC locations. 2. The devices are intended for protection against occasional overcurrent or overtemperature fault conditions and should not be used when repeated fault conditions or prolonged trip events are anticipated. 3. Please refer to the SCD for complete information and applications limitations, which can be obtained from product management (650-361-6900) or the web: www.circuitprotection.com/lvr/ WARNING! Agency approvals for PolySwitch devices: PolySwitch devices, where appropriate, have been tested and have gained the following safety agency approvals:
• UL Component Recognition in Category XGPU2, Thermistor Type Devices
• CSA Component Acceptance Class 9073 32, Thermistors—PTC Type
• T U¨V Rheinland Certification, PTC Resistors Voltage Rating for Telecom Devices For Raychem Circuit Protection telecom devices (TC, TGC, TRx, TSx) there are two applicable voltage ratings. These are V max. Operating and Vmax. Interrupt. To help understand the nature of these two different voltage ratings the following definitions are provided: V max. Interrupt: Under specified conditions this is the highest voltage that can be applied to the device at the maximum current. Devices have been designed to trip safely under higher power level cross conditions, as listed above, to assist equipment in meeting the appropriate industry conditions. V max. Operating: For telecom devices this is the voltage we have used to obtain component recognition under UL1434. Most Raychem Circuit Protection devices (TC, TGC, TRx, TSx) are certified at 60V but can withstand higher V max. TR600 and TS600 product families are certified at 250V but can withstand higher V max. Interrupt conditions as noted above. For the purposes of this brochure we have included in the table of electrical ratings the more applicable V max. Interrupt value. Definitions IH = Hold current—maximum current at which the device will not trip under specified conditions at 20°C unless otherwise specified. I max. = The highest fault current that can safely be used to trip a PolySwitch device under specified conditions. V max. = The highest voltage that can safely be dropped across a PolySwitch device continuously in its tripped state under specified fault conditions. R 1max. = Maximum device resistance under specified conditions measured 1 hour post trip or post reflow. R amax. = Maximum device resistance under automotive conditions specified in PS400 measured 1 hour after stress has been removed. Rmax. Initial = Maximum device resistance under specified conditions as supplied. I T = Minimum current at which a device will trip under specified conditions. Standard PolySwitch product families include, RGEF, RHEF, RTEF, RUEF, RXEF, LVR, SMDF, nanoSMDF, microSMDF, miniSMDF, BBRF, LR4F, LTPF, SRPF, VTPF, VLRF, VLPF, AHRF, AGRF, and AHS. PolySwitch TS, TR and ASMD product families offer a selected number of RoHS compliant parts. In addition, special devices, such as speaker devices (SPK), terminal devices (TD) and custom chip devices, can be manufactured to meet performance requirements that could be outside of the performance band of the standard products listed in this short form catalog. Please contact a Raychem Circuit Protection Customer Service representative to discuss your special product needs.

PolySwitch, SiBar, miniSMD, microSMD, and nanoSMD are trademarks of Tyco Electronics Corporation. All information, including illustrations, is believed to be reliable. Users, however, should independently evaluate the suitability of each product for their application. Tyco Electronics Corporation makes no warranties as to the accuracy or completeness of the information, and disclaims any liability regarding its use. Tyco Electronics’ only obligations are those in the Company’s Standard Terms and Conditions of Sale for this product, and in no case will Tyco Electronics be liable for any incidental, indirect, or consequential damages arising from the sale, resale, use, or misuse of the product. Specifications are subject to change without notice. In addition, Tyco Electronics reserves the right to make changes—without notification to Buyer—to materials or processing that do not affect compliance with any applicable specification. ©2005 Tyco Electronics Corporation. Printed in USA. RCP0014.0505.5000 South America Argentina Tel 54-11-4394-5150 Fax 54-11-4326-9985 Brazil Tel 55-11-5181-4788 Fax 55-11-5181-4790 Chile Tel 56-2-209-8211 Fax 56-2-223-1477 Colombia Tel 57-1-218-2460 Fax 57-1-218-2472 Peru Tel 51-1-221-4165 Fax 51-1-421-0368 Uruguay Tel 59-8-982-2428 Fax 59-8-982-2430 Venezuela Tel 58-2-242-6475 Fax 58-2-241-8260 Europe UK/EIRE/ Nordic Countries Tel (32) 16-352028 Fax (32) 16-351319 Germany/Austria/ Switzerland/ Eastern Europe Tel (49) 89-6089386 Fax (49) 89-6089394 France/Benelux/ Italy/Iberia Tel (33) 1-34202114 Fax (33) 1-34202324 Other Countries Tel (32) 16-351321 Fax (32) 16-351319 Asia/Pacific China, Beijing Tel 86-10-6581-5606 Fax 86-10-6581-5608 China, Guangzhou Tel 86-20-8330-9933 Fax 86-20-8385-6139 China, Hong Kong Tel 852-2738-3401 Fax 852-2735-1185 China, Shanghai Tel 86-21-6485-3288 Fax 86-21-6485-5109 China, Shenzhen Tel 86755-25154797 Fax 86755-25980419 India, Bangalore Tel 91-80-51121776 Fax 91-80-25586039 Japan Tel 81-44-900-5110 Fax 81-44-900-5140 Korea Tel 82-2-3415-4654 Fax 82-2-3486-1786 Malaysia Tel 6-04-611-2119 Fax 6-04-644-9521 Australia/Philippines Tel 63-2-848-0171 Fax 63-2-867-8661 Singapore Tel 65-6416-4205 Fax 65-6484-0661 Taiwan Tel 886-2-2662-9788 Fax 886-2-2662-4684 Thailand Tel 66-1-875-5758 Fax 66-2-617-1939 Worldwide Headquarters

308 Constitution Drive, MS R21/2A

Menlo Park, CA USA 94025-1 164 Tel (800) 227-7040 (650) 361-6900 Fax (650) 361-2508 www.circuitprotection.com www.circuitprotection.com.hk (Chinese) www.raychem.co.jp/polyswitch (Japanese)