TSL6001 STM | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 18
Technical content
Datasheet sections
- 1 Pin description
- 1.1 TSL6001 single operational amplifier
- 1.2 TSL6002 dual operational amplifier
- 1.3 Quad operational amplifier
- 2 Absolute maximum ratings
- 3 Electrical characteristics
- 4 Package information
- 4.1 SC70-5 (or SOT323-5) package information
- 4.2 SOT23-5 package information
- 4.3 MiniSO8 package information
- 4.4 SO8 package information
- 4.5 TSSOP-14 package information
- 5 Ordering information
Features
- Gain bandwidth product 1 MHz, unity gain stable
- Rail-to-rail input and output
- Wide supply voltage range: 1.8 V to 5.5 V
- Input offset voltage: 4.5 mV
- Low input bias current: 1 pA typ.
- Extended temperature range: -40 °C to +125 °C
- Automotive grade versions available
Applications
- Cost-sensitive applications
- Battery-powered products
- Automotive applications
Description
The TSL6001, TSL6002 and the TSL6004 are single, dual and quad 1 MHz- bandwidth unity-gain-stable amplifiers. The rail-to-rail input stage and the wide supply range from 1.8 V to 5.5 V make the TSL600x ideal for low voltage signal conditioning. Product status link SC70-5 TSL6001 SOT23-5 MiniSO8 TSL6002 SO8 TSSOP14 TSL6004
Related products
High bandwidth 50 MHz TSL640x Nanopower 600 nA TSL6801 High accuracy TSL6901 Low-power, 1 MHz, rail-to-rail, 5 V cost-effective op amp TSL6001, TSL6002, TSL6004 Datasheet DS13728 - Rev 3 - May 2025 For further information, contact your local STMicroelectronics sales office.
1 Pin description
1.1 TSL6001 single operational amplifier
Figure 1. SC70-5 and SOT23-5 pin connections (top view) Table 1. SC70-5 and SOT23-5 pin description
1 IN+ Non-inverting input channel
2 VCC- Negative supply voltage
3 IN- Inverting input channel
4 OUT Output channel
5 VCC+ Positive supply voltage
1.2 TSL6002 dual operational amplifier
Figure 2. MiniSO8 and SO8 pin connection (top view) Table 2. MiniSO8 and SO8 pin description
1 OUT1 Output channel 1
2 IN1- Inverting input channel 1
3 IN1+ Non-inverting input channel 1
4 VCC- Negative supply voltage
5 IN2+ Non-inverting input channel 2
6 IN2- Inverting input channel 2
7 OUT2 Output channel 2
8 VCC+ Positive supply voltage
1.3 Quad operational amplifier
Figure 3. TSSOP-14 pin connections (top view) Table 3. TSSOP-14 pin description
4 VCC+ Positive supply voltage
8 OUT3 Output channel 3
9 IN3- Inverting input channel 3
10 IN3+ Non-inverting input channel 3
11 VCC- Negative supply voltage
12 IN4+ Non-inverting input channel 4
13 IN4- Inverting input channel 4
14 OUT4 Output channel 4
2 Absolute maximum ratings
Table 4. Absolute maximum ratings
- All voltage values are with respect to the VCC- pin, unless otherwise specified.
- The maximum input voltage value may be extended to the condition that the input current is limited to ±10 mA.
- Rth-ja is a typical value.
- Human body model: HBM test according to the standard ESDA/JEDEC JS-001-2017.
- Charged device model:the test CDM is done in according to the standard ESDA/JEDEC JS-002-2018.
Table 5. Operating conditions
3 Electrical characteristics
Table 6. Electrical characteristics at VCC = 2 V to 5 V, VICM = VOUT = VCC / 2, T = 25 °C and OUT connected to VCC / 2 through RL = 10 kΩ (unless otherwise specified). Production screening at VCC = 5 V, operation on the full supply range ensured by design and characterization.
1.8 V ≤ VCC ≤ 5 V 86 dB
Electrical characteristics
4 Package information
To meet environmental requirements, ST offers these devices in different grades of ECOPACK packages, depending on their level of environmental compliance. ECOPACK specifications, grade definitions, and product status are available at: www.st.com. ECOPACK is an ST trademark. TSL6001, TSL6002, TSL6004
Package information
4.1 SC70-5 (or SOT323-5) package information
Figure 4. SC70-5 (or SOT323-5) package outline Table 7. SC70-5 (or SOT323-5) package mechanical data
4.2 SOT23-5 package information
Figure 5. SOT23-5 package outline Table 8. SOT23-5 package mechanical data
4.3 MiniSO8 package information
Figure 6. MiniSO8 package outline Table 9. MiniSO8 mechanical data DS13728 - Rev 3 page 10/18
4.4 SO8 package information
Figure 7. SO8 package outline Table 10. SO-8 mechanical data DS13728 - Rev 3 page 11/18
4.5 TSSOP-14 package information
Figure 8. TSSOP-14 package outline Table 11. TSSOP-14 mechanical data DS13728 - Rev 3 page 12/18
5 Ordering information
Table 12. Order code
- Qualified and characterized according to AEC Q100 and Q003 or equivalent, advanced screening according to AEC Q001 &
"Quality & Reliability" tab on www.st.com.
Ordering information
DS13728 - Rev 3 page 13/18
Revision history
Table 13. Document revision history 13-Oct-2021 1 Initial release. Added feature, application and new order code in Table 12. 12-May-2025 3 Updated title in Table 6.
through RL = 10 kΩ (unless otherwise specified).
IMPORTANT NOTICE – READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgment. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. For additional information about ST trademarks, refer to www.st.com/trademarks. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2025 STMicroelectronics – All rights reserved TSL6001, TSL6002, TSL6004 DS13728 - Rev 3 page 18/18