TSB511 STMICROELECTRONICS | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 26
Technical content
Datasheet sections
- 1 Pin connection
- 2 Maximum ratings
- 3 Electrical characteristics
- 4 Typical performance characteristics
- 5 Ordering information
- 6 Package information
- 6.1 SOT23-5 package information
- 6.2 MiniSO8 package information
- 6.3 SO8 package information
- 6.4 SO14 package information
- 6.5 TSSOP14 package information
Features
- Rail-to-rail input and output
- Low offset voltage: 1.5 mV maximum
- Wide supply voltage range: 2.7 V to 36 V
- Gain bandwidth product: 6 MHz
- Slew rate of 3 V/µs
- Low noise: 12 nV/√Hz
- Integrated EMI filter
- 2 kV HBM ESD tolerance
- Extended temperature range: - 40 °C to + 125 °C
- Automotive-grade available
Applications
- High-side and low-side current sensing
- Hall effect sensors
- Test and measurement equipment
- Motor control
- Industrial process control
- Stain gauge
Description
The TSB511, TSB512, TSB514 is a series of 6 MHz bandwidth amplifiers featuring rail-to-rail input and output, which are guaranteed to operate from 2.7 to 36 V single supply as well as from ± 1.35 V to ± 18 V dual supplies. These amplifiers have the advantage of offering a large span of supply voltage and a wide bandwidth. The combination of wide bandwidth, slew rate, low noise, rail-to-rail capability makes the TSB511, TSB512, TSB514 useful in a wide variety of applications such as: filters, power supply and motor control, actuator driving and resistive transducers. MiniSO8 SO8 SOT23-5 SO14TSSOP14 Maturity status link TSB511, TSB512, TSB514
Related products
For higher precisionTSB712 TSB714 Rail-to-rail inputs and outputs, 36 V, 6 MHz op amps TSB511, TSB512, TSB514 Datasheet DS13885 - Rev 1 - January 2022 For further information contact your local STMicroelectronics sales office.
1 Pin connection
Figure 1. TSB511 pin connections (top view) Table 1. TSB511 pin description
1 OUT1 Output
2 VCC - Negative supply voltage
3 IN+ Positive input voltage
4 IN- Negative input voltage
5 VCC + Positive supply voltage
Figure 2. TSB512 pin connections (top view) Table 2. TSB512 pin description
2 IN1- Negative input voltage
3 IN1+ Positive input voltage
4 VCC- Negative supply voltage
5 IN2+ Positive input voltage
6 IN2- Negative input voltage
7 OUT2 Output
8 VCC+ Positive supply voltage
Figure 3. TSB514 pin connections (top view) Table 3. TSB514 pin description
4 VCC+ Positive supply voltage
8 OUT3 Output
9 IN3- Negative input voltage
10 IN3+ Positive input voltage
11 VCC- Negative supply voltage
12 IN4+ Positive input voltage
13 IN4- Negative input voltage
14 OUT4 Output
2 Maximum ratings
Table 4. Absolute maximum ratings
- All voltage values, except differential voltage, are with respect to network ground terminal.
- The differential voltage is the non-inverting input terminal with respect to the inverting input terminal.
- Input voltage may be extended to the condition that the input current is limited to +/-10 mA. Input current must be limited by
a resistor in series with the inputs when the input voltage is beyond the rails or the differential input voltage is above +/-2 V.
- Short-circuits can cause excessive heating and destructive dissipation.
- According to JEDEC standard JESD22-A114F.
- According to ANSI/ESD STM5.3.1.
Table 5. Operating conditions
3 Electrical characteristics
Table 6. Electrical characteristics at VCC+ = 5 V, VCC- = 0 V, VICM = VOUT = VCC/2, T = 25 °C and RL
Electrical characteristics
Symbol Parameter Conditions Min. Typ. Max. Unit CLoad Capacitive load drive 100 pF en Input voltage noise density f = 10 kHz 12 nV/√Hz en p-p Input noise voltage 0.1 Hz ≤ f ≤ 10 Hz 0.8 µVpp 1. Current is positive when it is sinked into the op amp. 2. I io is defined as |Iibp – Iibn|. Table 7. Electrical characteristics at VCC+ = 36 V, VCC- = 0 V, VICM = VOUT = VCC/2, T = 25 °C and RL
5 V < (VCC+) - (VCC-) < 36 V,
Symbol Parameter Conditions Min. Typ. Max. Unit AC performance GBP Gain bandwidth product RL = 10 kΩ, CL = 100 pF 4.5 6 MHz SR Slew rate 9 V step, RL = 10 kΩ, CL = 100 pF, AV = 1 V/V, 10% to 90% 2.2 3 V/µs THD+N Total harmonic distortion + noise VIN = 1 Vrms, AV = +1, f = 1 kHz, BW = 22 kHz %RL = 10 kΩ 0.0003 RL = 1 kΩ 0.0003 Φm Phase margin RL = 10 kΩ, CL = 100 pF, Unity gain 45 ° CLoad Capacitive load drive 100 pF en Input voltage noise density f = 10 kHz 12 nV/√Hz en p-p Input noise voltage 0.1 Hz ≤ f ≤ 10 Hz 0.5 µVpp CR Cross talk VOUT = 5 Vpp, AV = +11, RL = 10 kΩ dBf = 1 kHz 125 f = 10 kHz 100 1. Current is positive when it is sinked into the op amp. 2. I io is defined as |Iibp – Iibn|. TSB511, TSB512, TSB514
4 Typical performance characteristics
Figure 4. Supply current vs. supply voltage Figure 5. Input offset voltage vs. supply voltage Figure 6. Input offset voltage vs. common mode voltage Figure 7. Input offset voltage vs. common mode voltage
5 Ordering information
Table 8. Order codes
- Qualified and characterized according to AEC Q100 and Q003 or equivalent, advanced screening according to AEC Q001 &
Ordering information
DS13885 - Rev 1 page 14/26
6 Package information
In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK packages, depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark. TSB511, TSB512, TSB514
Package information
DS13885 - Rev 1 page 15/26
6.1 SOT23-5 package information
Figure 37. SOT23-5 package outline Table 9. SOT23-5 mechanical data
- Values in inches are converted from mm and rounded to 4 decimal digits.
Figure 38. SOT23-5 recommended footprint
6.2 MiniSO8 package information
Figure 39. MiniSO8 package outline Table 10. MiniSO8 mechanical data
6.3 SO8 package information
Figure 40. SO8 package outline Table 11. SO8 mechanical data
6.4 SO14 package information
Figure 41. SO14 package outline Table 12. SO14 mechanical data
- Drawing dimensions include “Single” and “Matrix” versions.
- Dimension “D” does not include mold flash, protrusions or gate burrs. Mold flash, protrusions or gate burrs shall not exceed
6.5 TSSOP14 package information
Figure 42. TSSOP14 package outline Table 13. TSSOP14 mechanical data
Revision history
Table 14. Document revision history 26-Jan-2022 1 Initial release.
Table 6. Electrical characteristics at VCC+ = 5 V, VCC- = 0 V, VICM = VOUT = VCC/2, T = 25 °C and RL connected to VCC/2 Table 7. Electrical characteristics at VCC+ = 36 V, VCC- = 0 V, VICM = VOUT = VCC/2, T = 25 °C and RL connected to VCC/2