DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Features

For surface mounted applications in order to optimize board space Pb-free plated Peak Power is 480W@1ms ESD Rating of Class X (> 15 kV) (IEC6100-4-2) Response Time is Typically<1 ns Low profile package Typical IR less than 1µA above 10V Low inductance Excellent clamping capability AEC-Q101 TSB(480W) Series

Applications

Low frequency signal transmission line (RS232, RS485, etc.) Mechanical Characteristics Case: JEDEC DO-214AC. Molded plastic over glass passivated junction Terminal: Solderable per MIL-STD-750, Method 2026 Polarity: Color band denoted positive end (cathode) except Bidirectional Standard Packaging: 12mm tape (EIA STD RS-481) Weight: 0.002 ounce, 0.061 gram Maximum Ratings And Characteristics Ratings at 25 ℃ ambient temperature unless otherwise specified. Notes : 1.Non-repetitive current pulse , per Fig. 3 and derated above TA = 25 ℃ per Fig. 2 . 2.Mounted on 5.0mm x 5.0mm (0.03mm thick) Copper Pads to each terminal 3.8.3ms single half sine-wave , or equivalent square wave, Duty cycle = 4 pulses per minutes maximum. Peak Pulse Power Dissipation on 10/1000µs waveform Peak Forward Surge Current,8.3ms Single Half Sine-Wave Superimposed on Rated Load,(JEDEC Method) (Note2,3) Operating junction and Storage Temperature Range RATING SYMBOL VALUE UNITS PPPM IFSM TJ , TSTG Minimum 480 -55 to +150 Watts Amps Functional Diagram Bi-directional Uni-directional Cathode Anode REV 2017.. 03 01.

瞬 雷 电 子 S P S E M I www.spsemi.cn Page 2 of 5 Dimensions (DO-214AC) TSB(480W) Series

Electrical Characteristics

TSB6.0U TSB8.0U TSB12U TSB15U TSB16U TSB20U TSB22U TSB26U TSB28U TSB30U TSB33U TSB36U TSB40U TSB58U TSB60U TSB150U TSB170U TSB440U TS B Part Number Device Marking Code Reverse Stand-Off Voltage VRWM (V) VBR(V)Min. VBR(V)Max. Test Current IT(mA) Maximum Clamping Voltage @Ipp Vc(V) Peak Pulse Current Ipp(A) Reverse Leakage @VRWM IR(μA)UNI-Polar UNIBI-Polar BI AG AR BE BM BP BV BX CE CG CK CM CP CR RG RK SM SR TM WG WR XE XM XP XV XY YE YG YK YM YP YR ZG ZK VM VR UM 6.0 8.0 12.0 15.0 16.0 20.0 22.0 26.0 28.0 30.0 33.0 36.0 40.0 58.0 60.0 150.0 170.0 440.0 6.67 8.89 13.30 16.70 17.80 22.20 24.40 28.90 31.10 33.30 36.70 40.00 44.40 64.40 66.70 167.00 189.00 492.00 7.37 9.83 14.70 18.50 19.70 24.50 26.90 31.90 34.40 36.80 40.60 44.20 49.10 71.20 73.70 185.00 209.00 543.00 10.3 13.6 19.9 24.4 26.0 32.4 35.5 42.1 45.4 48.4 53.3 58.1 64.5 93.6 96.8 243.0 275.0 713.0 46.6 35.3 24.1 19.7 18.5 14.8 13.5 11.4 10.6 9.9 9.0 8.3 7.4 5.1 5.0 2.0 1.7 0.7 100 Breakdown Voltage @IT TSB6.0B TSB8.0B TSB12B TSB15B TSB16B TSB20B TSB22B TSB26B TSB28B TSB30B TSB33B TSB36B TSB40B TSB58B TSB60B TSB150B TSB170B TSB440B For bidirectional type having Vrwm of 10 volts and less, the IR limit is double. DO-214AC(SMA J-Bend) Cathode Band 0.065 1.65() 0.049 1.25() 0.185(4.70) 0.157(3.99) 0.112(2.85) 0.094(2.40) 0.091(2.30) 0.075(1.90) 0.208 5.28() 0.185 4.70() 0.012 0.305() 0.006 0.152() 0.060 1.52() 0.030 0.76() Dimensions in inches and(millimeters) 0.008(0.203)MAX. REV 2017.. 03 01.

瞬 雷 电 子 S P S E M I www.spsemi.cn Page 3 of 5 TSB(480W) Series Ratings And Characteristic Curves Fig.1 Peak Pulse Power Rating Fig.2 Pulse Derating Cruve I-V Curve Characteristics Uni-directional Bi-directional IPP IR IT VC VBR VRWM IPP IR IT VCVBRVRWM V IPP IR IT VC VBR VRWM VF V Fig.3 Pulse Waveform Fig.4 Typical Junction Capacitance 00 1.0 2.0 4.03.0 10/1000μsec .Waveform as defined by R.E.A Half Value IPPM tr=10uS Peak Value IPPM TJ=25℃ Pulse width(td) is defined ad the Point where the Peak Current Decays to 50% of I PPM 100 150 IPPM -Peak Pulse Current(%) t-Time(mS) td 0 25 50 75 100 125 150 175 200 100 TA-Ambient Temperature(℃) Peak Pulse Power(P PP) or Current(I PPM ) Derating in Percentage,% Copper Pad Areas CJ-Junction Capacitance(pF) 1 10 10010 100 1000 10000 VWM-Reverse Stand-off Voltage(V) Bi-Directional Uni-Directional TJ=25℃ f=1.0MH Z Vsig=50mVp-p Measured at Stand-off Voltage,V WM 200 PPPM -Peak Pulse Power (kW) 0.1μs 10μs 10ms 0.1 100 td - Pulse Width (sec.) Non-repetitive pulse waveform shown in Fig.3 TA = 25°C 1.0μs 100μs 1.0m s REV 2017.. 03 01.

瞬 雷 电 子 S P S E M I www.spsemi.cn Page 4 of 5 TSB(480W) Series Ratings And Characteristic Curves Fig.5 Typ.Transient Thermal Impedance Fig.6 Maximum Non-Repetitive Peak Forward Surge Current Uni-Directional Only P eak Forward Surge Current(A) 10 1 0 100 Number of Cycles at 60H Z TJ=TJmax 8.3mS single half sine-wave (JEDEC Method) Recommended Soldering Conditions Recommended Conditions Reflow Soldering ts tP tL Time time to peak temperature (t 25℃ to peak) T emperature Ts( min) Ts(max) TL TP Preheat Ramp-down Ramp-up Critical Zone TL to TP Re”ow Condition Pb-Free assembly (see Fig.1) Pre Heat -Temperature Min(T s(min) ) -Temperature Max(T s(max) ) -Time(Min to Max)(t s ) Average ramp up rate (Liquidus Temp(T L) to peak) Ts(max) to T L -Ramp-up Rate Re”ow -Temperature(T L)(Liquidus) -Temperature(t L) Peak Temp(T P) Time within 5℃ of actual Peak Temp(t P) Ramp-down Rate Time 25℃ to Peak Temp(T P) Do not exceed +150℃ +200℃ 60-180secs 3℃/sec.Max. 3℃/sec.Max. +217℃ 60-150secs +260(+0/-5)℃ 30 secs.Max. 6℃/sec.Max. 8 min.Max. +260℃ 0.001 0.1 1 100010 100 1000T ransient Thermal Impedance t p-Pulse Duration(sec) 0.01 100 Marking Code Cathode Band AG ** Marking Code Logo Date Code WG ** Marking Code Logo Date Code REV 2017.. 03 01.

瞬 雷 电 子 S P S E M I www.spsemi.cn Page 5 of 5 TSB(480W) Series Packing Options And Reel Specification-DO-214AC 0.157 (4.0) 0.47 (12.0) 0.157 (4.0) 0.49 (12.4) Symbol Ea Per Reel REEL DIA (mm) Industry Standard TSB*** 5000 330 EIA RS-481 13.0(330) REV 2017.. 03 01.