TS9011 TSC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Features
Dropout voltage typically 0.38V @Io=200mA (Vo=5V) Output current up to 250mA Low power consumption, 2uA(typ) @Vo=5V Output voltage +/-2% Internal current limit Thermal shutdown protection
Applications
P a l m t o p s Video recorders Battery powered equipment PC peripherals CD-ROM Digital signal camera
Ordering Information
Note: Where x denotes voltage option, available are Contact factory for additional voltage options. Part No. Operating Temp. (Ambient) Package TS9011xCT TO-92 TS9011xCX SOT-23 TS9011xCY -20 ~ +85 oC SOT-89 Block Diagram Typical Application Circuit Pin assignment TO-92 & SOT-89 1. Gnd 2. Input 3. Output SOT-23 1. Gnd 2. Out 3. Input
TS9011 series 2-4 2003/12 rev. D Absolute Maximum Rating Input Supply Voltage Vin(max.) +12 V Input Operating Voltage Vin(opr.) +10 Output Current Io P D / (Vin – Vo) V P o w e r D i s s i p a t i o n S O T - 2 3 S O T - 8 9 T O - 9 2 P D 0.15 0.50 0.65 W Operating Junction Temperature Range Tj -40 ~ +125 oC Storage Temperature Range T STG -65 ~ +150 oC Lead Soldering Temperature (260 oC) 10 S Caution: Stress above the listed absolute rating may cause permanent damage to the device.
Electrical Characteristics
Ta = 25 oC unless otherwise specified. Parameter Conditions Min Typ Max Unit TS90115 4.900 5.0 5.100 TS9011S 3.234 3.3 3.366 TS9011K 2.450 2.5 2.550 TS9011D 1.764 1.8 1.836 Output Voltage Vin=Vo + 1V, Io =40mA, TS9011A 1.47 1.5 1.53 V Maximum Output Current Vin=Vo+1V, 250 -- -- mA Input Stability Vo+1V ≤ Vin ≤ Vo+2V, Io=1mA -- 0.2 0.3 % TS90115 Vin=Vo+1V, 1mA≤IL≤100mA TS9011S -- 40 80 TS9011K TS9011D Load Regulation (Note1) Vin=Vo+1V, 1mA≤IL≤80mA TS9011A -- 40 90 mV Io=250mA TS90115 -- 400 600 Io=200mA TS9011S -- 400 650 Io=160mA TS9011K -- 400 700 Io=120mA TS9011D -- 400 750 Dropout Voltage (Note 2) Io=100mA TS9011A -- 850 1000 mV Quiescent Current Vin=Vo+1V, Io=0A -- 2 5 uA Output Current Limit Vout < 0.4V -- 400 -- mA Power Supply Rejection Ratio At f=100KHz, Io=10mA, -- 30 -- dB Output Voltage Temperature Coefficient (Note 3) -- 100 -- ppm/ oC Note: 1. Regulation is measured at constant junction temperature, using pulsed ON time. 2. Dropout is measured at c onstant junction temperature, using pulsed ON time, and the criterion is Vout inside target value +/-2%. 3. Guaranteed by design.
TS9011 series 3-4 2003/12 rev. D SOT-89 Mechanical Drawing SOT-89 DIMENSION MILLIMETERS INCHES DIM MIN MAX MIN MAX A 4.40 4.60 0.173 0.181 B 1.50 1.7 0.059 0.070 C 2.30 2.60 0.090 0.102 D 0.40 0.52 0.016 0.020 E 1.50 1.50 0.059 0.059 F 3.00 3.00 0.118 0.118 G 0.89 1.20 0.035 0.047 H 4.05 4.25 0.159 0.167 I 1.4 1.6 0.055 0.068 J 0.35 0.44 0.014 0.017 SOT-23 Mechanical Drawing D C A E B G F SOT-23 DIMENSION MILLIMETERS INCHES DIM MIN MAX MIN MAX A 2.88 2.91 0.113 0.115 B 0.39 0.42 0.015 0.017 C 1.78 2.03 0.070 0.080 D 0.51 0.61 0.020 0.024 E 1.59 1.66 0.063 0.065 F 1.04 1.08 0.041 0.043 G 0.07 0.09 0.003 0.004 H F E B A G C D J I
TS9011 series 4-4 2003/12 rev. D TO-92 Mechanical Drawing C D A B H E F G TO-92 DIMENSION MILLIMETERS INCHES DIM MIN MAX MIN MAX A 4.30 4.70 0.169 0.185 B 4.30 4.70 0.169 0.185 C 14.30(typ) 0.563(typ) D 0.43 0.49 0.017 0.019 E 2.19 2.81 0.086 0.111 F 3.30 3.70 0.130 0.146 G 2.42 2.66 0.095 0.105 H 0.37 0.43 0.015 0.017