TS9010 TSC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Features
Dropout voltage typically 0.4V @Io=150mA (Vo=5V) Output current up to 150mA (Vout=3V) Low power consumption Output voltage +/-2% Internal current limit Thermal shutdown protection
Ordering Information
Note: Where x denotes voltage option, available are A= 1.5V D= 1.8V, K= 2.5V, S= 3.3V, 5= 5.0V. Contact factory for additional voltage options. Part No. Operating Temp. (Ambient) Package TS9010xCX5 -40 ~ +85 oC SOT-25
Applications
P a l m t o p s Video recorders Battery powered equipment PC peripherals High-efficiency linear power supplies Digital signal camera Block Diagram Typical Application Circuit CE (pin 3) may be connected directly to Vin (pin 2) Pin assignment 1. Ground 2. Input 3. Enable 4. N/C 5. Output
TS9010 series 2-4 2004/09 rev. C Absolute Maximum Rating (Note 1) Description Symbol Value Unit Input Supply Voltage Vin +12 V Enable Input Voltage Vce 0 ~ Vin+0.3 V Output Current Io 200 mA Power Dissipation (Note 3) P D 380 mW Thermal Resistance Өja 220 oC/W Operating Junction Temperature Range Tj -40 ~ +125 oC Storage Temperature Range T STG -65 ~ +150 oC Lead Soldering Temperature (260 oC) 5 S Recommend Operating Rating (Note 2) Input Supply Voltage Vin +10 V Enable Input Voltage Vce Gnd-0.3 ~ Vin+0.3 V
Electrical Characteristics
Ta = 25 oC, Cout=2.2uF, Vce2V, unless otherwise specified. Parameter Conditions Min Typ Max Unit Output Voltage Vin=Vo + 1V, Io= 40mA 0.98|Vo| 1.02|Vo| V Output Voltage Temperature Coefficient (Note 4) -- 100 -- ppm/ oC Line Regulation Vo+1V ≤ Vin ≤ Vo+2V, Io=1mA -- 0.2 0.3 %/V Vin=Vo+1V, 1mA≤IL≤150mA Vo ≥ 2.5V -- 30 80 Load Regulation (Note 5) Vin=Vo+1V, 1mA≤IL≤80mA Vo< 2.5V -- 40 90 mV Io=80mA -- 200 400 Dropout Voltage (Note 6) Io=150mA -- 400 700 mV Quiescent Current Vin ≤0.4V (shutdown) -- 0.01 1 uA Vin=Ven=Vo+1V -- -- 19 Ground Pin Current (Note 7) Vin=Vo+1V, Ven=Gnd -- -- 0.1 uA Output Current Limit Vout=0V -- 300 -- mA Power Supply Rejection Ratio At f=100Hz, Io=0.1mA, -- 45 -- dB Thermal Regulation (Note 8) -- 0.05 -- %/W Enable Input Enable Input Logic-Low Voltage R egulation shutdown -- -- 0.25 V Enable Input Logic-High Voltage Regulation enable 1.5 -- -- V Vce=Vin -- -- 1 Enable Input Current Vce=Gnd 0.2 0.05 0 uA
TS9010 series 3-4 2004/09 rev. C Electrical Characteristics (continued) Note 1: Exceeding the absolute maximum rating may damage the device. Note 2: The device is not guaranteed to function outside its operating rating. Note 3: The maximum allowable power dissipation at any Ta is Pd(max) = [ Tj(max) - Ta] * Өja. Exceeding the maximum allowable power dissipation will result in exce ssive die temperature, and the regulator will go into thermal shutdown. Note 4: Output voltage tem perature coefficient is defi ned as the worst case voltage change divided by the total temperature range. Note 5: Regulation is measured at constant junction temperature using low duty cycle pulse testing. Parts are tested for load regulation in the load range from 1mA to 150mA( Vout>2.5V) and 1mA to 80mA(Vout<2.5V). Changes in output voltage due to heating effects are covered by the thermal regulation specification. Note 6: Dropout voltage is defined as t he input to output differential at whic h the output voltage dr ops 2% below its nominal value measured at 1V differential. Note 7: Ground pin current is the regulat or quiescent current plus pass transisto r base current. The total current drawn from the supply is the sum of the load current plus the ground pin current. Note 8: Thermal regulation is defined as the change in output voltage at a time “t” after a change in power dissipation is applied, excluding load or line regulation effects. Specifications are for a 150mA load pulse at Vin=12V for t=10mS. Application Examples Standard Circuit Typical Application Circuit 2
TS9010 series 4-4 2004/09 rev. C SOT-25 Mechanical Drawing SOT-23 DIMENSION MILLIMETERS INCHES DIM MIN MAX MIN MAX A 2.70 3.00 0.106 0.118 B 0.25 0.50 0.010 0.020 C 1.90(typ) 0.075(typ) D 0.95(typ) 0.037(typ) E 1.50 1.70 0.059 0.067 F 1.05 1.35 0.041 0.053 H 2.60 3.00 0.102 0.118 L 0.60(typ) 0.024(typ)