TS750 TSC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
/cuspopen Plastic material used carries Underwriters Laboratory Classification 94V-0 /cuspopen High forward current capability /cuspopen Diffused junction /cuspopen High surge current capability /cuspopen High temperature soldering guaranteed: 260OC/10 seconds, 0.375”(9.5mm) lead length, 5lbs.(2.3kg) tension Mechanical Data /cuspopen Cases: Molded plastic body /cuspopen Lead: Plated axial leads, solderable per MIL-STD-750, Method 2026 /cuspopen Polarity: Color band denotes cathode end /cuspopen Mounting position: Any /cuspopen Weight: 0.07 ounce, 2.1 grams P600 Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25℃ambient temperature unless otherwise specified. Single phase, half wave,60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Symbol TS750 TS751 TS752 TS754 TS756 TS758 Units Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 V Maximum Non-repetitive Peak Reverse Voltage VBR 60 120 240 480 720 1200 V Maximum Average Forward Rectified Current at TA = 60℃, P.C.B. Mounting (Fig. 1) TL= 60℃, 0.125”(3.18mm) Lead Length (Fig. 2) I(AV) 6.0 22.0 A Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) IFSM 400 A 0.95 Maximum Instantaneous Forward Voltage @ 6.0A @ 100A VF 1.25 1.30 V Maximum DC Reverse Current @ TA=25℃ at Rated DC Blocking Voltage @ TA=100℃ IR 5.0 1000 uA uA Typical Junction Capacitance ( Note 1 ) Cj 150 pF Typical Thermal Resistance (Note 2) RθJA RθJL 20.0 4.0 ℃/W Operating Junction Temperature Range TJ -50 to +150 ℃ Storage Temperature Range TSTG -50 to +150 ℃ Notes: 1. Measured at 1.0 MHz and Applied Reverse Voltage of 4.0 Volts 2. Mount on Cu-Pad Size 16mm x 16mm on P.C.B.
- 527 - RATINGS AND CHARACTERISTIC CURVES (TS750 THRU TS758) FIG.6- TYPICAL TRANSIENT THERMAL IMPEDANCE TRANSIENT THERMAL IMPEDANCE, C/WO 10.01 0.1 10 1000.1 100 T, PULSE DURATION, sec. FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE AVERAGE FOR WARD RECTIFIED CURRENT . (A) 0 20 40 60 80 100 120 140 180 200 160 2.0 1.0 3.0 4.0 5.0 6.0 7.0 8.0 AMBIENT TEMPERATURE. ( C) o 1.1 x 1.0" (30 x 30Mmm) COPPER PADS
60 Hz RESISTIVE OR
INDUCTIVE LOAD GROUND PLANE 1 . 0X1 . 0 " (25.4 X 25.4mm) COPPER SURFACE AREA 0.050"(1.27mm) min. ALTERNATE P.C.B. FIG.4- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS INSTANTANEOUS FORDW ARD CURRENT AMPERES INSTANTANEOUS FORWARD VOLTAGE, VOLTS 0.1 0.01 100 Tj=25 C PULSE WIDTH-300 S 1% DUTY CYCLE FIG.3- TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT MICROAMPERES 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) 0.1 0.01 100 Tj=125 C0 Tj=25 C0 Tj=100 C0 FIG.2- MAXIMUM FORWARD CURRENT DERATING CURVE AVERAGE FOR WARD CURRENT . (A) 0 20 40 60 80 100 120 140 180 200 160 LEAD TEMPERATURE. ( C) o INDUCTIVE LOADL=0.125" (3.18mm)L=0.25" (6.35mm) L=0.375" (9.5mm) L=0.625" (15.8mm) BOTH LEADS ATTACHED as HEAT SINKS WITH LENGTH as SHOWN, L FIG.5- MAXIMUM PEAK FORWARD SURGE CURRENT PEAK FOR WARD SURGE CURRENT AMPERES 0.1 1 10 100 600 NUMBER OF CYCLES AT 60Hz V may be APPLIED BETWEEN EACH CYCLE of SURGE, the Tj NOTED is Tj PRIOR to SURGE RRM Tj=25 C0