TS5A1066DCKRE4

TS5A1066_10 TI | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 26

Technical content

www.ti.com

FEATURES

(TOP VIEW) NO COM GND IN YEP OR YZP PACKAGE (BOTTOM VIEW) NO COM GND IN DESCRIPTION/ORDERING INFORMATION TS5A1066 10- Ω SPST ANALOG SWITCH SCDS185B JANUARY 2005 REVISED APRIL 2006 Low ON-State Resistance (10 Ω Control Inputs Are 5.5-V Tolerant Low Charge Injection Low Total Harmonic Distortion (THD) 1.65-V to 5.5-V Single-Supply Operation Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II ESD Performance Tested Per JESD 2000-V Human-Body Model (A114-B, Class II) 1000-V Charged-Device Model (C101) The TS5A1066 is a single-pole single-throw (SPST) analog switch that is designed to operate from 1.65 V to 5.5 This device can handle both digital and analog signals, and signals up to V (peak) can be transmitted in either direction. SUMMARY OF CHARACTERISTICS Single-Pole, Configuration Single-Throw Demultiplexer SPST) Number of channels ON-state resistance on 7.5 Ω ON-state resistance flatness on(flat) 2.5 Ω Turn-on/turn-off time ON OFF 9.5 ns/2 ns Charge injection C pC Bandwidth (BW) 400 MHz OFF isolation ISO dB at MHz Total harmonic distortion (THD) 0.14% Leakage current COM(OFF) 0.1 µ A Power-supply current (I+) 0.05 µ A 5-pin DSBGA, SOT-23, Package options or SC-70 ORDERING INFORMATION T A PACKAGE (1) ORDERABLE PART NUMBER TOP-SIDE MARKING (2) NanoStar WCSP (DSBGA) TS5A1066YEPR 0.23-mm Large Bump YEP Tape and reel JD_ NanoFree WCSP (DSBGA) 0.23-mm Large Bump YZP TS5A1066YZPR C to C (Pb-free) SOT (SOT-23) DBV Tape and reel TS5A1066DBVR JAD_ SOT (SC-70) DCK Tape and reel TS5A1066DCKR JD_ (1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. (2) DBV/DCK: The actual top-side marking has one additional character that designates the assembly/test site. YEP/YZP: The actual top-side marking has three preceding characters to denote year, month, and sequence code, and one following character to designate the assembly/test site. Pin identifier indicates solder-bump composition SnPb, Pb-free). Please be aware that an important notice concerning availability, standard warranty, and use in critical

applications

sheet. PRODUCTION DATA information is current as of publication date. Copyright 2005 2006, Texas Instruments Incorporated Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

www.ti.com Absolute Minimum and Maximum Rating (1) (2) TS5A1066 10- Ω SPST ANALOG SWITCH SCDS185B JANUARY 2005 REVISED APRIL 2006 FUNCTION TABLE NO TO COM, IN COM TO NO L OFF H ON over operating free-air temperature range (unless otherwise noted) MIN MAX UNIT V Supply voltage range (3) 0.5 6.5 V V NO Analog voltage range (3) (4) (5) 0.5 V 0.5 V V COM I K Analog port diode current V NO V COM or V NO V COM V mA I NO On-state switch current V NO V COM to V mA I COM V I Digital input voltage range (3) (4) 0.5 6.5 V I IK Digital input clamp current V I mA I Continuous current through each V or GND 100 100 mA I GND DBV package 206 θ JA Package thermal impedance (6) DCK package 252 C/W YEP/YZP package 132 T stg Storage temperature range 150 C (1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. (2) The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum. (3) All voltages are with respect to ground, unless otherwise specified. (4) The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed. (5) This value is limited to 5.5 V maximum. (6) The package thermal impedance is calculated in accordance with JESD 51-7. Submit Documentation Feedback

www.ti.com Electrical Characteristics for 5-V Supply (1) TS5A1066 10- Ω SPST ANALOG SWITCH SCDS185B JANUARY 2005 REVISED APRIL 2006 V 4.5 V to 5.5 T A C to C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS T A V MIN TYP MAX UNIT Analog Switch Analog signal V COM V NO V V range V NO V C 7.5 ON-state Switch ON, r on 4.5 V Ω I COM mA, resistance See Figure Full ON-state C 2.5 V NO V Switch ON, resistance r on(flat) 4.5 V Ω I COM mA, See Figure Full flatness V NO C 0.2 0.1 0.2 NO V COM 4.5 Switch OFF, OFF leakage I NO(OFF) or 5.5 V µ A See Figure Full current V NO 4.5 V COM V COM C 0.1 0.05 0.1 COM V NO 4.5 Switch OFF, OFF leakage I COM(OFF) or 5.5 V µ A See Figure Full 0.2 0.2 current V COM 4.5 V NO V NO C 0.2 0.1 0.2 NO V COM Open, Switch ON, ON leakage I NO(ON) or 5.5 V µ A See Figure Full current V NO 4.5 V COM Open, V COM C 0.1 0.05 0.1 COM V NO Open, Switch ON, ON leakage I COM(ON) or 5.5 V µ A See Figure Full 0.2 0.2 current V COM 4.5 V NO Open, Digital Control Input (IN) Input logic high V IH Full V 0.7 5.5 V Input logic low V IL Full V 0.3 V C 0.1 0.05 0.1 Input leakage I IH I IL V I 5.5 V or 5.5 V µ A current Full (1) The algebraic convention is used in this data sheet; the most negative value is shown in the minimum column. Submit Documentation Feedback

www.ti.com TS5A1066 10- Ω SPST ANALOG SWITCH SCDS185B JANUARY 2005 REVISED APRIL 2006 Electrical Characteristics for 5-V Supply (continued) V 4.5 V to 5.5 T A C to C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS T A V MIN TYP MAX UNIT Dynamic C V 3.5 4.8 5.5 V COM C L pF, Turn-on time t ON ns R L 300 Ω See Figure Full 4.5 V to 5.5 V 3.5 7.5 C V 4.5 V COM C L pF, Turn-off time t OFF ns R L 300 Ω See Figure Full 4.5 V to 5.5 V 5.5 Charge V GEN Q C See Figure C V pC injection C L 0.1 nF, NO V NO V or GND, OFF C NO(OFF) See Figure C V 6.8 pF Switch OFF, capacitance COM V COM V or GND, OFF C COM(OFF) See Figure C V 6.8 pF Switch OFF, capacitance NO V NO V or GND, ON C NO(ON) See Figure C V pF Switch ON, capacitance COM V COM V or GND, ON C COM(ON) See Figure C V pF Switch ON, capacitance Digital input C I V I V or GND, See Figure C V 2.2 pF capacitance R L Ω Bandwidth BW See Figure C V 400 MHz Switch ON, R L Ω Switch OFF, OFF isolation O ISO C V dB f MHz, See Figure Total harmonic R L 600 Ω f Hz to kHz, THD C V 0.14 distortion C L pF, See Figure Supply C 0.05 Positive supply I V I V or GND, Switch ON or OFF 5.5 V µ A current Full Submit Documentation Feedback

www.ti.com Electrical Characteristics for 3.3-V Supply (1) TS5A1066 10- Ω SPST ANALOG SWITCH SCDS185B JANUARY 2005 REVISED APRIL 2006 V V to 3.6 T A C to C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS T A V MIN TYP MAX UNIT Analog Switch Analog signal V COM V NO V V range V NO V C 11.5 ON-state Switch ON, r on V Ω I COM mA, resistance See Figure Full ON-state C V NO V Switch ON, resistance r on(flat) V Ω I COM mA, See Figure Full flatness V NO C 0.2 0.1 0.2 NO V COM Switch OFF, OFF leakage I NO(OFF) or 3.6 V µ A See Figure Full current V NO V COM V COM C 0.1 0.05 0.1 COM V NO Switch OFF, OFF leakage I COM(OFF) or 3.6 V µ A See Figure Full 0.2 0.2 current V COM V NO V NO C 0.2 0.1 0.2 NO V COM Open, Switch ON, ON leakage I NO(ON) or 3.6 V µ A See Figure Full current V NO V COM Open, V COM C 0.1 0.05 0.1 COM V NO Open, Switch ON, ON leakage I COM(ON) or 3.6 V µ A See Figure Full 0.2 0.2 current V COM V NO Open, Digital Control Input (IN) Input logic high V IH Full V 0.7 5.5 V Input logic low V IL Full V 0.3 V C 0.1 0.05 0.1 Input leakage I IH I IL V I 5.5 V or 3.6 V µ A current Full (1) The algebraic convention is used in this data sheet; the most negative value is shown in the minimum column. Submit Documentation Feedback

www.ti.com TS5A1066 10- Ω SPST ANALOG SWITCH SCDS185B JANUARY 2005 REVISED APRIL 2006 Electrical Characteristics for 3.3-V Supply (continued) V V to 3.6 T A C to C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS T A V MIN TYP MAX UNIT Dynamic C 3.3 V 4.5 5.5 V COM C L pF, Turn-on time t ON ns V to R L 300 Ω See Figure Full 4.5 8.5 3.6 V C 3.3 V 4.5 V COM C L pF, Turn-off time t OFF ns V to R L 300 Ω See Figure Full 5.5 3.6 V Charge V GEN Q C See Figure C 3.3 V pC injection C L 0.1 nF, NO V NO V or GND, OFF C NO(OFF) See Figure C 3.3 V 6.8 pF Switch OFF, capacitance COM V COM V or OFF C COM(OFF) GND, See Figure C 3.3 V 6.8 pF capacitance Switch OFF, NO V NO V or GND, ON C NO(ON) See Figure C 3.3 V pF Switch ON, capacitance COM V COM V or ON C COM(ON) GND, See Figure C 3.3 V pF capacitance Switch ON, Digital input C I V I V or GND, See Figure C 3.3 V 2.2 pF capacitance R L Ω Bandwidth BW See Figure C 3.3 V 400 MHz Switch ON, R L Ω Switch OFF, OFF isolation O ISO C 3.3 V dB f MHz, See Figure Total harmonic R L 600 Ω f Hz to kHz, THD C 3.3 V 0.2 distortion C L pF, See Figure Supply C 0.05 Positive supply I V I V or GND, Switch ON or OFF 3.6 V µ A current Full Submit Documentation Feedback

www.ti.com Electrical Characteristics for 2.5-V Supply (1) TS5A1066 10- Ω SPST ANALOG SWITCH SCDS185B JANUARY 2005 REVISED APRIL 2006 V 2.3 V to 2.7 T A C to C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS T A V MIN TYP MAX UNIT Analog Switch Analog signal V COM V NO V V range V NO V C ON-state Switch ON, r on 2.3 V Ω I COM mA, resistance See Figure Full ON-state C 7.5 V NO V Switch ON, resistance r on(flat) 2.3 V Ω I COM mA, See Figure Full flatness V NO 0.5 C 0.2 0.1 0.2 NO V COM 2.2 Switch OFF, OFF leakage I NO(OFF) or 2.7 V µ A See Figure Full current V NO 2.2 V COM 0.5 V COM 0.5 C 0.1 0.05 0.1 COM V NO 2.2 Switch OFF, OFF leakage I COM(OFF) or 2.7 V µ A See Figure Full 0.2 0.2 current V COM 2.2 V NO 0.5 V NO 0.5 C 0.2 0.1 0.2 NO V COM Open, Switch ON, ON leakage I NO(ON) or 2.7 V µ A See Figure Full current V NO 2.2 V COM Open, V COM 0.5 C 0.1 0.05 0.1 COM V NO Open, Switch ON, ON leakage I COM(ON) or 2.7 V µ A See Figure Full 0.2 0.2 current V COM 2.2 V NO Open, Digital Control Input (IN) Input logic high V IH Full V 0.7 5.5 V Input logic low V IL Full V 0.3 V C 0.1 0.05 0.1 Input leakage I IH I IL V I 5.5 V or 2.7 V µ A current Full (1) The algebraic convention is used in this data sheet; the most negative value is shown in the minimum column. Submit Documentation Feedback

www.ti.com TS5A1066 10- Ω SPST ANALOG SWITCH SCDS185B JANUARY 2005 REVISED APRIL 2006 Electrical Characteristics for 2.5-V Supply (continued) V 2.3 V to 2.7 T A C to C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS T A V MIN TYP MAX UNIT Dynamic C 2.5 V 4.5 5.5 V COM 1.5 C L pF, Turn-on time t ON ns 2.3 V to R L 300 Ω See Figure Full 4.5 8.5 2.7 V C 2.5 V 1.5 2.5 V COM 1.5 C L pF, Turn-off time t OFF ns 2.3 V to R L 300 Ω See Figure Full 1.5 5.5 2.7 V Charge V GEN Q C See Figure C 2.5 V pC injection C L 0.1 nF, NO V NO V or GND, OFF C NO(OFF) See Figure C 2.5 V 6.8 pF Switch OFF, capacitance COM V COM V or GND, OFF C COM(OFF) See Figure C 2.5 V 6.8 pF Switch OFF, capacitance NO V NO V or GND, ON C NO(ON) See Figure C 2.5 V pF Switch ON, capacitance COM V COM V or GND, ON C COM(ON) See Figure C 2.5 V pF Switch ON, capacitance Digital input C I V I V or GND, See Figure C 2.5 V 2.2 pF capacitance R L Ω Bandwidth BW See Figure C 2.5 V 400 MHz Switch ON, R L Ω Switch OFF, OFF isolation O ISO C 2.5 V dB f MHz, See Figure Total harmonic R L 600 Ω f Hz to kHz, THD C 2.5 V 0.32 distortion C L pF, See Figure Supply C 0.05 Positive supply I V I V or GND, Switch ON or OFF 2.7 V µ A current Full Submit Documentation Feedback

www.ti.com Electrical Characteristics for 1.8-V Supply (1) TS5A1066 10- Ω SPST ANALOG SWITCH SCDS185B JANUARY 2005 REVISED APRIL 2006 V 1.65 V to 1.95 T A C to C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS T A V MIN TYP MAX UNIT Analog Switch Analog signal V COM V NO V V range V NO V C 74.5 ON-state Switch ON, r on 1.65 V Ω I COM mA, resistance See Figure Full 100 ON-state C 64.5 V NO V Switch ON, resistance r on(flat) 1.65 V Ω I COM mA, See Figure Full flatness V NO 0.3 C 0.2 0.1 0.2 NO V COM 1.65 Switch OFF, OFF leakage I NO(OFF) or 1.95 V µ A See Figure Full current V NO 1.65 V COM 0.3 V COM 0.3 C 0.1 0.05 0.1 COM V NO 1.65 Switch OFF, OFF leakage I COM(OFF) or 1.95 V µ A See Figure Full 0.2 0.2 current V COM 1.65 V NO 0.3 V NO 0.3 C 0.2 0.1 0.2 NO V COM Open, Switch ON, ON leakage I NO(ON) or 1.95 V µ A See Figure Full current V NO 1.65 V COM Open, V COM 0.3 C 0.1 0.05 0.1 COM V NO Open, Switch ON, ON leakage I COM(ON) or 1.95 V µ A See Figure Full 0.2 0.2 current V COM 1.65 V NO Open, Digital Control Input (IN) Input logic high V IH Full V 0.65 5.5 V Input logic low V IL Full V 0.35 V C 0.1 0.05 0.1 Input leakage I IH I IL V I 5.5 V or 1.95 V µ A current Full (1) The algebraic convention is used in this data sheet; the most negative value is shown in the minimum column. Submit Documentation Feedback

www.ti.com TS5A1066 10- Ω SPST ANALOG SWITCH SCDS185B JANUARY 2005 REVISED APRIL 2006 Electrical Characteristics for 1.8-V Supply (continued) V 1.65 V to 1.95 T A C to C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS T A V MIN TYP MAX UNIT Dynamic C 1.8 V 9.5 V COM 1.3 C L pF, Turn-on time t ON ns 1.65 V to R L 300 Ω See Figure Full 8.5 1.95 V C 1.8 V 1.5 V COM 1.3 C L pF, Turn-off time t OFF ns 1.65 V to R L 300 Ω See Figure Full 1.5 5.5 1.95 V Charge V GEN Q C See Figure C 1.8 V pC injection C L 0.1 nF, NO V NO V or GND, OFF C NO(OFF) See Figure C 1.8 V 6.8 pF Switch OFF, capacitance COM V COM V or GND, OFF C COM(OFF) See Figure C 1.8 V 6.8 pF Switch OFF, capacitance NO V NO V or GND, ON C NO(ON) See Figure C 1.8 V pF Switch ON, capacitance COM V COM V or GND, ON C COM(ON) See Figure C 1.8 V pF Switch ON, capacitance Digital input C I V I V or GND, See Figure C 1.8 V 2.2 pF capacitance R L Ω Bandwidth BW See Figure C 1.8 V 400 MHz Switch ON, R L Ω Switch OFF, OFF isolation O ISO C 1.8 V dB f MHz, See Figure Total harmonic R L 600 Ω f Hz to kHz, THD C 1.8 V 0.32 distortion C L pF, See Figure Supply C 0.05 Positive supply I V I V or GND, Switch ON or OFF 1.95 V µ A current Full Submit Documentation Feedback

www.ti.com TYPICAL PERFORMANCE 0 1 2 3 4 5 VCC = 1.65 V VCOM (V) ron VCC = 2.3 V VCC = 3 V VCC = 4.5 V V+ = 4.5 V 85C 25C ±40C VCOM (V) ron () VCOM V ron ( V+ = 3 V 85C 25C ±40C 0 0.5 1 1.5 2 2.5 3 3.5 TS5A1066 10- Ω SPST ANALOG SWITCH SCDS185B JANUARY 2005 REVISED APRIL 2006 Figure r on vs V COM Figure r on vs V COM Figure r on vs V COM Submit Documentation Feedback

www.ti.com TYPICAL PERFORMANCE TA (C) Leakage (nA) −60 −40 −20 0 20 40 60 80 100 ICOM(ON) COM NO INO(ON) NO COM ICOM (OFF) NO LO ICOM (OFF) NO HI INO (OFF) COM LO INO (OFF) COM HI IIN_VIN ‘IN’ C-LO IIN_VIN ‘IN’ C-HI Bias Voltage (V) Charge Injection (pC) 3.5 2.5 1.5 0.5 0 0.5 1 1.5 2 2.5 3 3.5 V+ (V) 0 1 2 3 4 5 6 tON/tOFF (ns) TA = 25° C tON tOFF TS5A1066 10- Ω SPST ANALOG SWITCH SCDS185B JANUARY 2005 REVISED APRIL 2006 Figure Leakage Current vs Temperature 5.5 Figure Charge Injection C vs Bias Voltage Figure t ON and t OFF vs Supply Voltage Submit Documentation Feedback

www.ti.com TYPICAL PERFORMANCE −40 25 85 tON/tOFF (ns) TA (C) tOFF tON 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 0 1 2 3 4 5 6 V+ (V) Logic Level Threshold (nA) VIH VIL Frequency (MHz) Gain (dB) −4.5 −3.5 −2.5 −1.5 −0.5 100 1K 10K 100K 1M TS5A1066 10- Ω SPST ANALOG SWITCH SCDS185B JANUARY 2005 REVISED APRIL 2006 Figure t ON and t OFF vs Temperature Figure Logic-Level Threshold vs V Figure Bandwidth Submit Documentation Feedback

www.ti.com TYPICAL PERFORMANCE −120 −100 −80 −60 −40 −20 100 1K 10K 100K 1M Frequency (MHz) Attenuation (dB) Frequency (Hz) THD + Noise (%) 0.05 0.1 0.15 0.2 0.25 0.3 0.35 0.4 10 100 1M 10M 100M V+ = 3.3 V V+ = 5 V TA (C) I+ (nA) 100 200 300 400 500 600 700 −60 −40 −20 0 20 40 60 80 100 V+ = 5.5 V TS5A1066 10- Ω SPST ANALOG SWITCH SCDS185B JANUARY 2005 REVISED APRIL 2006 Figure 10. OFF Isolation Figure 11. Total Harmonic Distortion vs Frequency Figure 12. Power-Supply Current vs Temperature Submit Documentation Feedback

www.ti.com TS5A1066 10- Ω SPST ANALOG SWITCH SCDS185B JANUARY 2005 REVISED APRIL 2006 PIN

DESCRIPTION

V Power supply PARAMETER V COM Voltage at COM V NO Voltage at NO r on Resistance between COM and NO ports when the channel is ON r on(flat) Difference between the maximum and minimum value of ron in a channel over the specified range of conditions I NO(OFF) Leakage current measured at the NO port, with the corresponding channel (NO to COM) in the OFF state Leakage current measured at the NO port, with the corresponding channel (NO to COM) in the ON state and the output I NO(ON) (COM) open I COM(OFF) Leakage current measured at the COM port, with the corresponding channel (COM to NO) in the OFF state Leakage current measured at the COM port, with the corresponding channel (COM to NO) in the ON state and the output I COM(ON) (NO) open V IH Minimum input voltage for logic high for the control input (IN) V IL Maximum input voltage for logic low for the control input (IN) V I Voltage at the control input (IN) I IH I IL Leakage current measured at the control input (IN) Turn-on time for the switch. This parameter is measured under the specified range of conditions and by the propagation t ON delay between the digital control (IN) signal and analog output (COM or NO) signal when the switch is turning ON. Turn-off time for the switch. This parameter is measured under the specified range of conditions and by the propagation t OFF delay between the digital control (IN) signal and analog output (COM or NO) signal when the switch is turning OFF. Charge injection is a measurement of unwanted signal coupling from the control (IN) input to the analog (NO or COM) Q C output. This is measured in coulomb (C) and measured by the total charge induced due to switching of the control input.Charge injection, Q C C L Δ V COM C L is the load capacitance and Δ V COM is the change in analog output voltage. C NO(OFF) Capacitance at the NO port when the corresponding channel (NO to COM) is OFF C NO(ON) Capacitance at the NO port when the corresponding channel (NO to COM) is ON C COM(OFF) Capacitance at the COM port when the corresponding channel (COM to NO) is OFF C COM(ON) Capacitance at the COM port when the corresponding channel (COM to NO) is ON C I Capacitance of IN OFF isolation of the switch is a measurement of OFF-state switch impedance. This is measured in dB in a specific O ISO frequency, with the corresponding channel (NO to COM) in the OFF state. BW Bandwidth of the switch. This is the frequency in which the gain of an ON channel is dB below the DC gain. Total harmonic distortion is defined as the ratio of the root mean square (RMS) value of the second, third, and higher THD harmonics to the magnitude of fundamental harmonic. I Static power-supply current with the control (IN) pin at V or GND Δ I This is the increase in I for each control (IN) input that is at the specified voltage, rather than at V or GND. Submit Documentation Feedback

www.ti.com PARAMETER MEASUREMENT INFORMATION ICOM ron VCOM VNO ICOM GND Channel ON NO VI COM VCOM VI = VIH or VIL VNO IN Channel OFF OFF-State Leakage Current VI = VIH or VIL GND NO VI COM VCOM VNO IN Channel ON ON-State Leakage Current VI = VIH or VIL GND NO VI COM VCOM VNO IN TS5A1066 10- Ω SPST ANALOG SWITCH SCDS185B JANUARY 2005 REVISED APRIL 2006 Figure 13. ON-State Resistance on Figure 14. OFF-State Leakage Current COM(OFF) I NO(OFF) Figure 15. ON-State Leakage Current COM(ON) I NO(ON) Submit Documentation Feedback

www.ti.com GND IN VBIAS VI VI = VIH or VIL VBIAS = V+ or GND Capacitance is measured at NO, COM, and IN inputs during ON and OFF conditions. Capacitance Meter VNO VCOM NO COM CL(2) RL VCOM(3) GND NO IN VNO VI COM Logic Input(1) 300 Ω RL CL 35 pFtON TEST 300 Ω 35 pFtOFF 50% tON tOFF 50% 90% 90% Logic Input (VI) Switch Output (VNO) (1) All input pulses are supplied by generators having the following characteristics: PRR ≤ /char????????10 MHz, ZO = 50 , tr < 5 ns, tf < 5 ns. (2) CL includes probe and jig capacitance. (3) See Electrical Characteristics for VCOM. TS5A1066 10- Ω SPST ANALOG SWITCH SCDS185B JANUARY 2005 REVISED APRIL 2006 PARAMETER MEASUREMENT INFORMATION (continued) Figure 16. Capacitance I C COM(OFF) C COM(ON) C NO(OFF) C NO(ON) Figure 17. Turn-On ON and Turn-Off Time OFF Submit Documentation Feedback

www.ti.com GND NO INVI COM VNO VCOM Channel ON: NO to COM Network Analyzer Setup Source Power = 0 dBM (632-mV P-P at 50- load) DC Bias = 350 mV Network Analyzer Source Signal VI = VIH or VIL NO COM VNO VCOM Channel OFF: NO to COM Network Analyzer Setup Source Power = 0 dBM (632-mV P-P at 50- load) DC Bias = 350 mV GND Network Analyzer Source Signal INVI VI = VIH or VIL TS5A1066 10- Ω SPST ANALOG SWITCH SCDS185B JANUARY 2005 REVISED APRIL 2006 PARAMETER MEASUREMENT INFORMATION (continued) Figure 18. Bandwidth (BW) Figure 19. OFF Isolation ISO Submit Documentation Feedback

www.ti.com GND NO IN RGEN VI COM VCOM CL(2) OFF VCOM ON OFF ΔVCOM VGEN VI = VIH or VIL CL = 0.1 nF VGEN = 0 to V+ RGEN = 0 QC = CL × ΔVCOM Logic Input(1) VIH VIL Logic Input (VI) (1) All input pulses are supplied by generators having the following characteristics: PRR ≤/char????????10 MHz, ZO = 50 , tr < 5 ns, tf < 5 ns. (2) CL includes probe and jig capacitance. GND NO COM 10 F RL CL(1) RL = 600 Ω CL = 50 pF VSOURCE = V+ P-P fSOURCE = 20 Hz to 20 kHz RL VSOURCE V+/2 Analyzer 10 F Channel ON: COM to NO VO INVI VI = VIH or VIL (1) CL includes probe and jig capacitance. TS5A1066 10- Ω SPST ANALOG SWITCH SCDS185B JANUARY 2005 REVISED APRIL 2006 PARAMETER MEASUREMENT INFORMATION (continued) Figure 20. Charge Injection C Figure 21. Total Harmonic Distortion (THD) Submit Documentation Feedback

Orderable Device Status(1) Package Type Package Drawing Pins Package Qty Eco Plan(2) Lead/Ball FinishMSL Peak Temp (3) TS5A1066DBVR ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TS5A1066DBVRE4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TS5A1066DBVRG4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TS5A1066DCKR ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TS5A1066DCKRE4 ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TS5A1066DCKRG4 ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TS5A1066YZPR ACTIVE DSBGA YZP 5 3000 Green (RoHS & no Sb/Br) SNAGCU Level-1-260C-UNLIM (1)The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2)Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontentfor the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS):TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt):This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br):TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. PACKAGE OPTION ADDENDUM www.ti.com 22-Jul-2008 Addendum-Page 1

*All dimensions are nominal Device Package Type Package Drawing Pins SPQ Reel Diameter (mm) Reel Width W1 (mm) (mm) (mm) (mm) (mm) W (mm) Pin1 Quadrant PACKAGE MATERIALS INFORMATION www.ti.com 20-Jul-2010 Pack Materials-Page 1

*All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TS5A1066YZPR DSBGA YZP 5 3000 220.0 220.0 34.0 PACKAGE MATERIALS INFORMATION www.ti.com 20-Jul-2010 Pack Materials-Page 2

Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Amplifiers amplifier.ti.com Audio www.ti.com/audio Data Converters dataconverter.ti.com Automotive www.ti.com/automotive DLP® Products www.dlp.com Communications and www.ti.com/communications Telecom DSP dsp.ti.com Computers and www.ti.com/computers Peripherals Clocks and Timers www.ti.com/clocks Consumer Electronics www.ti.com/consumer-apps Interface interface.ti.com Energy www.ti.com/energy Logic logic.ti.com Industrial www.ti.com/industrial Power Mgmt power.ti.com Medical www.ti.com/medical Microcontrollers microcontroller.ti.com Security www.ti.com/security RFID www.ti-rfid.com Space, Avionics & www.ti.com/space-avionics-defense Defense RF/IF and ZigBee® Solutionswww.ti.com/lprf Video and Imaging www.ti.com/video Wireless www.ti.com/wireless-apps Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2010, Texas Instruments Incorporated