TS5213_15 TSC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

Document Number: DS_P0000201 1 Version: G15 80mA Low Noise LDO Voltage Regulator with Enable Function GENERAL DESCRIPTION TS5213 is an efficient linear voltage regulator wit h ultra- low noise output, very low dropout voltage (typical ly 50mV at light loads and 320mV at 80mA), and very lo w ground current (225μA at 20mA), providing high outp ut current even when the application requires very low dropout voltage. The Chip Enable (EN) includes a CMOS or TTL compatible input allows the output to b e turned off to prolong battery life. When shutdown, power consumption drops nearly to zero. TS5213 is included a precision voltage reference, error corre ction circuit, a current limited output driver, over temp erature shutdown and revered battery protection.

FEATURES

  • Ultra Low Noise Output
  • Output Current up to 80mA
  • Low Power Consumption
  • “Zero” Off-mode Consumption
  • Logic Controlled Electronic Enable
  • Current Limit & Thermal Shutdown Protection APPLICATION
  • Cellular Telephones
  • Palmtops, Notebook Computers
  • Battery Powered Equipment
  • SMPS Post Regulator and DC to DC Modules
  • High-efficiency Linear Power Supplies
  • Portable Application SOT -25 Pin Definition : 1. Input 2. Ground 3. Enable 4. N/C 5. Output Notes: Moisture sensitivity level: level 3. Per J-STD-020 TYPICAL APPLICATION CIRCUIT EN may be connected to V IN pin to regulation ON CIN > 0.1μF in basic operating COUT >0.47μF in low noise operating

Document Number: DS_P0000201 2 Version: G15 ABSOLUTE MAXIMUM RATINGS (TA = 25°C unless otherwise noted) (Note 1) PARAMETER SYMBOL LIMIT UNIT Input Supply Voltage VIN -20~ +20 V Enable Input Voltage VCE -20~ +20 V Power Dissipation (Note 2) PD Internal limited Thermal Resistance RθJA 220 oC/W Operating Junction Temperature Range T J -40 ~ +125 oC Storage Temperature Range TSTG -65 ~ +150 oC Lead Soldering Temperature (260 oC) 5 S RECOMMEND OPERATING RATING (Note 2) PARAMETER SYMBOL LIMIT UNIT Input Supply Voltage VIN +2.5 ~ +16 V Enable Input Voltage VCE 0 ~ VIN V ELECTRICAL SPECIFICATIONS (VIN = VO+1V, IO = 100μA, C OUT = 1μF, Vce≥2V, TA = 25°C unless otherwise noted) PARAMETER CONDITIONS MIN TYP MAX UNIT Output Voltage VIN =V O + 1V -3 -- 3 % Output Voltage Temp. Coefficient (Note 5) -- 50 200 ppm/ oC Line Regulation VO+1V ≤ VIN ≤ 16V -- 0.008 0.3 % Load Regulation (Note 6) 0.1mA ≤ Io ≤ 80mA -- 0.08 0.3 % Dropout Voltage (Note 7) IO=100uA -- 50 -- mV IO=20mA -- 230 300 IO=50mA -- 280 370 IO=80mA -- 320 420 Quiescent Current VEN ≤0.4V (shutdown) -- 0.01 10 μA Ground Pin Current (Note 8) VEN≥2V (active) IO=100μA -- 80 -- μA IO=20mA -- 225 750 IO=50mA -- 850 -- IO=80mA -- 1800 3000 Output Current Limit VOUT =0V -- 250 500 mA Power Supply Rejection Ratio At f=100Hz, I O=100μA, -- 65 -- dB Thermal Regulation (Note 9) -- 0.05 -- %/W

Document Number: DS_P0000201 3 Version: G15 ELECTRICAL SPECIFICATIONS (V IN = VO+1V, I O = 100μA, C OUT = 1μF, Vce≥2V, TA = 25°C unless otherwise noted) Enable Function PARAMETER CONDITIONS MIN TYP MAX UNIT Enable Input Logic-Low Voltage Regulation shutdown -- -- 0.6 V Enable Input Logic-High Voltage Regulation enable 2.0 -- -- V Enable Input Current VIL ≤ 0.6V -- 0.01 1 μA VIH ≥ 2.0V -- 15 50 V Note: 1. Exceeding the absolute maximum rating may damage the device. 2. The maximum allowable power dissipation at any T A is P D(MAX) = [T J(MAX) - Ta] + R θJA . Exceeding the maximum allowable power dissipation will result in excessive die temperature, and the regulator will go into thermal shutdown. 3. Devices are ESD sensitive. Handling precautions recommended. 4. The device is not guaranteed to function outside its operating rating. 5. Output voltage temperature coefficient is define d as the worst case voltage change divided by the total temperature range. 6. Regulation is measured at constant junction temp erature using low duty cycle pulse testing. Parts a re tested for load regulation in the load range from 1mA to 80mA. Chan ges in output voltage due to heating effects are co vered by the thermal regulation specification. 7. Dropout voltage is defined as the input to outpu t differential at which the output voltage drops 2% below its nominal value measured at 1V differential. 8. Ground pin current is the regulator quiescent cu rrent plus pass transistor base current. The total current drawn from the supply is the sum of the load current plus the ground pin current. 9. Thermal regulation is defined as the change in o utput voltage at a time “t” after a change in power dissipation is applied, excluding load or line regulation effects. Specifications are for a 80mA load pulse at V IH =16V for t=10ms.

Document Number: DS_P0000201 4 Version: G15

ORDERING INFORMATION

OUTPUT VOLTAGE PART NO. PACKAGE PACKING 3.3V TS5213CX533 RFG SOT-25 3,000pcs / 7” Reel 5V TS5213CX550 RFG SOT-25 3,000pcs / 7” Reel Note: 1. Compliant to RoHS Directive 2011/65/EU and in ac cordance to WEEE 2002/96/EC. 2. Halogen-free according to IEC 61249-2-21 definit ion. BLOCK DIAGRAMS

APPLICATION INFORMATION

TS5213 series feature an active-high (>2V) enable ( EN) input that allows ON/OFF control of the regulat or. Current drain reduces to “zero” when the device is shutdown, with only micro-amperes of leakage curren t. The EN is compatible with CMOS logic interfacing. EN ma y be directly tied to V IH and pulled up to the maximum supply voltage. Input Capacitor Requirement An input capacitor of 0.17μF or greater is recommen ded when the device is more than 10” away from the bulk AC supply capacitance or when the supply is a battery. Output Capacitor Requirement The TS5213 series requires an output capacitor to maintain stability and improve transient response is necessary. The TS5213 is ultra-stable, requiring only 0.47uF o f output capacitance for stability. It is stable wi th all type of capacitors, including the tiny, low-ESR ceramic chi p capacitors. The output capacitor value may be inc reased without limit. No Load Stability The TS5213 series will remain stable and in regulat ion with no load, unlike many other voltage regulat ors. This is especially important in CMOS RAM keep alive applications.

Document Number: DS_P0000201 5 Version: G15 APPLICATION INFORMATION (CONTINUE) Thermal Characteristics TS5213 series is designed to provide 80mA of contin uous current in a very small package. Maximum power dissipation can be calculated based on the output c urrent and the voltage drop across the part. To det ermine the maximum power dissipation of the package, use the j unction-ambient thermal resistance of the device an d the following basic equation: PD(MAX) = [ T J(MAX) – TA ] /ΘJA TJ(MAX) is the maximum junction temperature of the die(125 oC), and Ta is the ambient operating temperature. Θ JA is layout dependent, the actual power dissipation of the regulator circuit can be determined using the equation: PD = (V IN – VOUT ) * I OUT + V IN * I GND Substituting P D(MAX) for P D and solving for the operating conditions that are critical to the application will give the maximum operating conditions for the regulator circ uit. For example, when operating the TS5213CX550 at room temperature with a minimum footprint layout, the ma ximum input voltage for a set output current can be determined as follows: PD(MAX) = (125 oC – 25 oC) / 220 oC/W PD(MAX) = 455mW The junction to ambient thermal resistance for the minimum footprint is 220 oC/W, the maximum power dissipation must not be exceeded for proper operation. Using th e output voltage of 5.0V and an output current of 8 0mA, the maximum input voltage can be determined. Form the e lectrical characteristics table, the maximum ground current for 80mA output current is 1mA. 445mW = (V IN – 5.0V ) * 80mA + V IN * 1.8mA 445mW = V IN * 80mA – 5.0 * 80mA + V IN * 1.8mA 445mW = V IN * 80mA – 400mW + V IN * 1.8mA 845mW = V IN * 81.8mA VIN (max) = 10.33V Therefore, a 5.0V application at 80mA of output cur rent can accept a maximum input voltage of 10.33V i n a SOT- 25 package.

Document Number: DS_P0000201 7 Version: G15 PACKAGE OUTLINE DIMENSIONS (Unit: Millimeters) SOT-25 SUGGESTED PAD LAYOUT (Unit: Millimeters) MARKING DIAGRAM T = Device Code X = Voltage Code (5 = 5.0V, S = 3.3V) Y = Year Code M = Month Code for Halogen Free Product O =Jan P =Feb Q =Mar R =Apr S =May T =Jun U =Jul V =Aug W =Sep X =Oct Y =Nov Z =Dec L = Lot Code (1~9, A~Z)

Document Number: DS_P0000201 8 Version: G15 Notice Specifications of the products displayed herein are subject to change without notice. TSC or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, to any intellectual property rights is granted by this document. Except as provided in TSC’s terms and co nditions of sale for such products, TSC assumes no liability wh atsoever, and disclaims any express or implied warr anty, relating to sale and/or use of TSC products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applica tions. Customers using or selling these products for use i n such applications do so at their own risk and agr ee to fully indemnify TSC for any damages resulting from such improper use or sale.