TS514_05 STMICROELECTRONICS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 10
Technical content
Rev. 3 September 2005 1/10 TS514 / TS514A Precision Quad Operational Amplifier ■ Low input offset voltage: 500 µV max. ■ Low power consumption. ■ Short circuit protection. ■ Low distortion, low noise. ■ High gain-bandwidth product. ■ High channel separation. ■ ESD protection 2kV. ■ Macromodel included in this specification.
Description
The TS514 is a high-performance quad operational amplifier with frequency and phase compensation built into the chip. The internal phase compensation allows stable operation as a voltage follower in spite of its high gain-bandwidth product. The circuit presents very stable electrical characteristics over the entire supply voltage range, and is particularly intended for professional and telecom applications (active filter, etc.). Pin Connections (top view) Order Codes N DIP14 (Plastic Package) D SO-14 (Plastic Micropackage) /C73/C110/C118/C101/C114/C116/C105/C110/C103/C32/C73/C110/C112/C117/C116/C32/C50 /C78/C111/C110/C45/C105/C110/C118/C101/C114/C116/C105/C110/C103/C32/C73/C110/C112/C117/C116/C32/C50 /C78/C111/C110/C45/C105/C110/C118/C101/C114/C116/C105/C110/C103/C32/C73/C110/C112/C117/C116/C32/C49 /C67/C67/C86/C32/C32/C32/C32/C32 /C45/C67/C67/C86 /C49 /C50 /C51 /C52 /C56 /C53 /C54 /C55 /C57 /C49/C48 /C49/C49 /C49/C50 /C49/C51 /C49/C52 /C43 /C79/C117/C116/C112/C117/C116/C32/C51 /C79/C117/C116/C112/C117/C116/C32/C52 /C78/C111/C110/C45/C105/C110/C118/C101/C114/C116/C105/C110/C103/C32/C73/C110/C112/C117/C116/C32/C52 /C73/C110/C118/C101/C114/C116/C105/C110/C103/C32/C73/C110/C112/C117/C116/C32/C52 /C78/C111/C110/C45/C105/C110/C118/C101/C114/C116/C105/C110/C103/C32/C73/C110/C112/C117/C116/C32/C51 /C73/C110/C118/C101/C114/C116/C105/C110/C103/C32/C73/C110/C112/C117/C116/C32/C51 /C45 /C43 /C45 /C43 /C45 /C43 /C45 /C43 /C79/C117/C116/C112/C117/C116/C32/C49 /C73/C110/C118/C101/C114/C116/C105/C110/C103/C32/C73/C110/C112/C117/C116/C32/C49 /C79/C117/C116/C112/C117/C116/C32/C50 Part Number Temperature Range Package Packing Marking TS514IN -40, + 125°C DIP14 T ube 514IN TS514AIN 514AIN TS514ID/IDT SO-14 T ube or Tape & Reel 514I TS514AID/AIDT 514AI TS514IYD/IYDT SO14 (automotive grade level) 514IY TS514AIYD/AIYDT 514AIY
1 Absolute Maximum Ratings
Table 1. Key parameters and their absolute maximum ratings
- Differential voltages are with respect to the midpoint between Vcc+ and Vcc-.
- Power dissipation must be considered to ensure maximum junction temperature (Tj) is not exceeded.
- Human body model, 100pF discharged through a 1.5k Ω resistor into pin of device.
- Machine model ESD, a 200pF cap is charged to the specified voltage, then discharged directly into the IC with
no external series resistor (internal resistor < 5 Ω), into pin to pin of device. Table 2. Operating conditions
2 Schematic Diagram
Figure 1. Typical application schematic for 1/4 of the TS514
3 Electrical Characteristics
Table 3. V CC = ±15V, Tamb = 25°C (unless otherwise specified)
4 Macromodels
4.1 Important note concerning this macromodel
Please consider following remarks before using this macromodel.
- All models are a trade-off between accuracy and complexity (i.e. simulation time).
- Macromodels are not a substitute to breadboarding; rather, they confirm the validity of a design approach and help to select surrounding component values.
- A macromodel emulates the NOMINAL performance of a TYPICAL device within SPECIFIED OPERATING CONDITIONS (i.e. temperature, supply voltage, etc.). Thus the macromodel is often not as exhaustive as the datasheet, its goal is to illustrate the main parameters of the product.
- Data issued from macromodels used outside of its specified conditions (Vcc, Temperature, etc.) or even worse: outside of the device operating conditions (Vcc, Vicm, etc.) are not reliable in any way. In Section 4.2, the electrical characteristics resulting from the use of this macromodel are presented.
4.2 Electrical characteristics from macromodelization
Table 4. Electrical characteristics resulting from macromodel simulation at V cc = ±15V,
Macromodels TS514 / TS514A
4.3 Macromodel code
Standard Linear Ics Macromodels, 1993. CONNECTIONS : * 1 INVERTING INPUT * 2 NON-INVERTING INPUT * 3 OUTPUT * 4 POSITIVE POWER SUPPLY * 5 NEGATIVE POWER SUPPLY .SUBCKT TS514 1 3 2 4 5 (analog) .MODEL MDTH D IS=1E-8 KF=6.647807E-16 CJO=10F * INPUT STAGE CIP 2 5 1.000000E-12 CIN 1 5 1.000000E-12 EIP 10 5 2 5 1 EIN 16 5 1 5 1 RIP 10 11 1.300000E+01 RIN 15 16 1.300000E+01 RIS 11 15 6.437882E+01 DIP 11 12 MDTH 400E-12 DIN 15 14 MDTH 400E-12 VOFP 12 13 DC 0 VOFN 13 14 DC 0 IPOL 13 5 2.000000E-05 CPS 11 15 9.75E-10 DINN 17 13 MDTH 400E-12 VIN 17 5 0.000000e+00 DINR 15 18 MDTH 400E-12 VIP 4 18 1.500000E+00 FCP 4 5 VOFP 1.525000E+01 FCN 5 4 VOFN 1.525000E+01 FIBP 2 5 VOFN 5.000000E-03 FIBN 5 1 VOFP 5.000000E-03 * AMPLIFYING STAGE FIP 5 19 VOFP 1.125000E+03 FIN 5 19 VOFN 1.125000E+03 RG1 19 5 6.512062E+05 RG2 19 4 6.512062E+05 CC 19 29 1.500000E-08 HZTP 30 29 VOFP 8.944787E+02 HZTN 5 30 VOFN 8.944787E+02 DOPM 19 22 MDTH 400E-12 DONM 21 19 MDTH 400E-12 HOPM 22 28 VOUT 6.521739E+03 VIPM 28 4 1.500000E+02 HONM 21 27 VOUT 6.521739E+03 VINM 5 27 1.500000E+02 GCOMP 5 4 4 5 7.485029E-04 RPM1 5 80 1E+09 RPM2 4 80 1E+09
TS514 / TS514A Macromodels GAVPH 5 82 19 80 2.99E-03 RAVPHGH 82 4 668 RAVPHGB 82 5 668 RAVPHDH 82 83 1000 RAVPHDB 82 84 1000 CAVPHH 4 83 0.352E-09 CAVPHB 5 84 0.352E-09 EOUT 26 23 82 5 1 VOUT 23 5 0 ROUT 26 3 150 COUT 3 5 1.000000E-12 DOP 19 25 MDTH 400E-12 VOP 4 25 1.785252E+00 DON 24 19 MDTH 400E-12 VON 24 5 1.785252E+00 .ENDS
5 Package Mechanical Data
In order to meet environmental requirements, ST offers these devices in ECOPACK ® packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com
5.1 DIP14 Package
DIM. mm. inch a1 0.51 0.020 B 1.39 1.65 0.055 0.065 b 0.5 0.020 b1 0.25 0.010 D 20 0.787 E 8.5 0.335 e 2.54 0.100 e3 15.24 0.600 F 7.1 0.280 I 5.1 0.201 L 3.3 0.130 Z 1.27 2.54 0.050 0.100 Plastic DIP-14 MECHANICAL DATA P001A
TS514 / TS514A Package Mechanical Data
5.2 SO-14 Package
DIM. mm. inch A 1.75 0.068 a1 0.1 0.2 0.003 0.007 a2 1.65 0.064 b 0.35 0.46 0.013 0.018 b1 0.19 0.25 0.007 0.010 C 0.5 0.019 c1 45˚ (typ.) D 8.55 8.75 0.336 0.344 E 5.8 6.2 0.228 0.244 e 1.27 0.050 e3 7.62 0.300 F 3.8 4.0 0.149 0.157 G 4.6 5.3 0.181 0.208 L 0.5 1.27 0.019 0.050 M 0.68 0.026 S˚ ( m a x . ) SO-14 MECHANICAL DATA PO13G
6 Revision History
March 2001 1 Initial release June 2005 2 Automotive grade part references inserted in the datasheet (see Order Codes on page 1). Sept. 2005 3 The following changes were made in this revision: – An error in the device description was corrected on page 1. – Order Codes on page 1 updated with complete list of markings. – Addition of supplementary data in T able 1: Key parameters and their absolute maximum ratings on page 2 . – Addition of Table 2: Operating conditions on page 2. – Reorganization of Chapter 4: Macromodels on page 5 . – Minor grammatical and formatting changes throughout. Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this p ublication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicr oelectronics. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners © 2005 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Ital y - Japan - Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America