TS3A24157DGSRG4

TS3A24157 TI | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 25

Technical content

FEATURES

APPLICATIONS

(TOP VIEW) DGS PACKAGE (TOP VIEW) GND 4 5 6 910 1 IN1 COM1 IN2 COM2 NC1 NO1 NC2 NO2 GND DESCRIPTION/ORDERING INFORMATION TS3A24157 0.65- Ω DUAL SPDT ANALOG SWITCH DUAL-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER SCDS208A JUNE 2007 REVISED SEPTEMBER 2007 www.ti.com Cell Phones Specified Break-Before-Make Switching PDAs Low ON-State Resistance (0.65 Ω Max) Portable Instrumentation Low Charge Injection Audio and Video Signal Routing Excellent ON-State Resistance Matching Low-Voltage Data Acquisition Systems Low Total Harmonic Distortion (THD) Communication Circuits 1.65-V to 3.6-V Single-Supply Operation Modems Latch-Up Performance Exceeds 100 mA Per Hard Drives JESD 78, Class II Computer Peripherals ESD Performance Tested Per JESD Wireless Terminals and Peripherals 2000-V Human-Body Model (A114-B, Class II) 1000-V Charged-Device Model (C101) The TS3A24157 is a dual single-pole double-throw (SPDT) analog switch that is designed to operate from 1.4 V to 3.6 The device offers low ON-state resistance and excellent ON-state resistance matching with the break-before-make feature, to prevent signal distortion during the transfer of a signal from one channel to another. The device has excellent total harmonic distortion (THD) performance and consumes very low power. These applications. ORDERING INFORMATION T A PACKAGE (1) (2) ORDERABLE PART NUMBER TOP-SIDE MARKING QFN RSE Tape and reel TS3A24157RSER JZ0 C to C VSSOP DGS (MSOP) Tape and reel TS3A24157DGSR JZ0 (1) Package drawings, thermal data, and symbolization are available at www.ti.com/packaging (2) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI website at www.ti.com FUNCTION TABLE NC TO COM, NO TO COM, IN COM TO NC COM TO NO L ON OFF H OFF ON Please be aware that an important notice concerning availability, standard warranty, and use in critical sheet. PRODUCTION DATA information is current as of publication date. Copyright 2007, Texas Instruments Incorporated Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

www.ti.com Absolute Maximum Ratings (1) (2) Package Thermal Impedance TS3A24157 0.65- Ω DUAL SPDT ANALOG SWITCH DUAL-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER SCDS208A JUNE 2007 REVISED SEPTEMBER 2007 SUMMARY OF CHARACTERISTICS V T A C Dual 2:1 Multiplexer/ Configuration Demultiplexer SPDT) Number of channels ON-state resistance on 0.65 Ω max ON-state resistance match Δ r on 0.07 Ω max ON-state resistance flatness on(flat) 0.04 Ω max Turn-on/turn-off time ON OFF ns/25 ns Break-before-make time BBM ns Charge injection C 8.75 pC Bandwidth (BW) MHz OFF isolation ISO dB Crosstalk TALK dB Total harmonic distortion (THD) 0.005% Power-supply current nA Package options 10-pin QFN, 10-pin VSSOP over operating free-air temperature range (unless otherwise noted) MIN MAX UNIT V Supply voltage range (3) 0.5 3.6 V V NC V NO Analog voltage range (3) (4) (5) 0.5 V 0.5 V V COM I I/OK Analog port diode current V NC V NO V COM mA I NC ON-state switch current 300 300 I NO V NC V NO V COM to V mA ON-state peak switch current (6) 500 500 I COM V I Digital input voltage range 0.5 3.6 V I IK Digital input clamp current (3) (4) V I mA I Continuous current through V 100 mA I GND Continuous current through GND 100 mA T stg Storage temperature range 150 C (1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. (2) The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum. (3) All voltages are with respect to ground, unless otherwise specified. (4) The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed. (5) This value is limited to 5.5 V maximum. (6) Pulse at 1-ms duration <10% duty cycle. over operating free-air temperature range (unless otherwise noted) TYP UNIT DGS package 165 θ JA Package thermal impedance (1) C/W RSE package 243 (1) The package thermal impedance is calculated in accordance with JESD 51-7. Submit Documentation Feedback Copyright 2007, Texas Instruments Incorporated Product Folder Link(s): TS3A24157

www.ti.com Electrical Characteristics for 3-V Supply (1) TS3A24157 0.65- Ω DUAL SPDT ANALOG SWITCH DUAL-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER SCDS208A JUNE 2007 REVISED SEPTEMBER 2007 V 2.7 V to 3.6 T A C to C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS T A V MIN TYP MAX UNIT Analog Switch Analog signal V COM V NO V V range V NC C 0.5 0.65 Peak ON NO or V NC V Switch ON, r peak 2.7 V Ω resistance I COM 100 mA, See Figure Full 0.75 C 0.45 0.6 ON-state V NO or V NC Switch ON, r on 2.7 V Ω resistance I COM 100 mA, See Figure Full 0.65 ON-state C 0.05 0.07 V NO or V NC 0.8 Switch ON, resistance match Δ r on 2.7 V Ω I COM 100 mA, See Figure Full 0.08 between channels NO or V NC V Switch ON, C 0.025 I COM 100 mA, See Figure ON-state r on(flat) 2.7 V Ω resistance flatness C 0.01 0.04 V NO or V NC 0.8 Switch ON, I COM 100 mA, See Figure Full 0.1 NC, NO V NC or V NO V COM C I NC(OFF) Switch OFF, OFF leakage or 3.6 V nA I NO(OFF) See Figure Full 250 250 current V NC or V NO V COM NC, NO V NC or V NO V COM Open, C I NC(ON) Switch ON, ON leakage or 3.6 V nA I NO(ON) See Figure Full 400 400 current V NC or V NO V COM Open, COM V NC or V NO Open, V COM C Switch ON, ON leakage I COM(ON) or 3.6 V nA See Figure Full 400 400 current V NC or V NO Open, V COM Digital Control Inputs (IN1, IN2) (2) Input logic high V IH Full 1.4 V Input logic low V IL Full 0.5 V C Input leakage I IH I IL V I 3.6 V or 3.6 V nA current Full 150 150 (1) The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum (2) All unused digital inputs of the device must be held at V or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs literature number SCBA004. Copyright 2007, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Link(s): TS3A24157

www.ti.com Electrical Characteristics for 3-V Supply (1) (Continued) TS3A24157 0.65- Ω DUAL SPDT ANALOG SWITCH DUAL-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER SCDS208A JUNE 2007 REVISED SEPTEMBER 2007 V 2.7 V to 3.6 T A C to C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS T A V MIN TYP MAX UNIT Dynamic C V V COM V C L pF, Turn-on time t ON ns 2.7 V to R L Ω See Figure Full 3.6 V C V V COM V C L pF, Turn-off time t OFF ns 2.7 V to R L Ω See Figure Full 3.6 V C V Break-before- V NC V NO V C L pF, t BBM ns 2.7 V to make time R L Ω See Figure Full 0.5 3.6 V V GEN C L nF, Charge injection Q C C V 8.75 pC R GEN See Figure NC, NO C NC(OFF) V NC or V NO V or GND, See Figure C V pF OFF capacitance C NO(OFF) Switch OFF, NC, NO C NC(ON) V NC or V NO V or GND, See Figure C V 140 pF ON capacitance C NO(ON) Switch ON, COM V COM V or GND, C COM(ON) See Figure C V 140 pF ON capacitance Switch ON, Digital input C I V I V or GND, See Figure C V pF capacitance R L Ω Bandwidth BW See Figure C V MHz Switch ON, R L Ω OFF isolation O ISO See Figure C V dB f MHz, R L Ω Crosstalk X TALK See Figure C V dB f MHz, Total harmonic R L 600 Ω f Hz to kHz, THD C V 0.005 distortion C L pF, See Figure Supply C 200 Positive supply I V I V or GND 3.6 V nA current Full 1200 (1) The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum Submit Documentation Feedback Copyright 2007, Texas Instruments Incorporated Product Folder Link(s): TS3A24157

www.ti.com Electrical Characteristics for 2.5-V Supply (1) TS3A24157 0.65- Ω DUAL SPDT ANALOG SWITCH DUAL-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER SCDS208A JUNE 2007 REVISED SEPTEMBER 2007 V 2.3 V to 2.7 T A C to C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS T A V MIN TYP MAX UNIT Analog Switch Analog signal V COM V NO V V range V NC C 0.55 0.75 Peak ON NO or V NC V Switch ON, r peak 2.3 V Ω resistance I COM mA, See Figure Full 0.9 C 0.56 0.75 ON-state V NO or V NC 1.8 Switch ON, r on 2.3 V Ω resistance I COM mA, See Figure Full 0.85 ON-state C 0.1 0.15 V NO or V NC 1.8 0.8 Switch ON, resistance match Δ r on 2.3 V Ω I COM mA, See Figure Full 0.15 between channels NO or V NC V Switch ON, C 0.1 0.15 I COM mA, See Figure ON-state r on(flat) 2.3 V Ω resistance flatness C 0.17 V NO or V NC 0.8 1.8 Switch ON, I COM mA, See Figure Full 0.2 NC, NO V NC or V NO 0.5 V COM 2.2 C I NC(OFF) Switch OFF, OFF leakage or 2.7 V nA I NO(OFF) See Figure Full 250 250 current V NC or V NO 2.2 V COM 0.5 NC, NO V NC or V NO 0.5 V COM Open, C I NC(ON) Switch ON, ON leakage or 2.7 V nA I NO(ON) See Figure Full 400 400 current V NC or V NO 2.2 V COM Open, COM V NC or V NO Open, V COM 0.5 C Switch ON, ON leakage I COM(ON) or 2.7 V nA See Figure Full 400 400 current V NC or V NO Open, V COM 2.2 Digital Control Inputs (IN1, IN2) (2) Input logic high V IH Full 1.25 V Input logic low V IL Full 0.5 V C Input leakage I IH I IL V I 2.7 V or 2.7 V nA current Full (1) The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum (2) All unused digital inputs of the device must be held at V or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs literature number SCBA004. Copyright 2007, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Link(s): TS3A24157

www.ti.com Electrical Characteristics for 2.5-V Supply (1) (Continued) TS3A24157 0.65- Ω DUAL SPDT ANALOG SWITCH DUAL-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER SCDS208A JUNE 2007 REVISED SEPTEMBER 2007 V 2.3 V to 2.7 T A C to C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS T A V MIN TYP MAX UNIT Dynamic C 2.5 V V COM V C L pF, Turn-on time t ON ns 2.3 V to R L Ω See Figure Full 2.7 V C 2.5 V V COM V C L pF, Turn-off time t OFF ns 2.3 V to R L Ω See Figure Full 2.7 V C 2.5 V Break-before- V NC V NO V C L pF, t BBM ns 2.3 V to make time R L Ω See Figure Full 2.7 V V GEN C L nF, Charge injection Q C C 2.5 V pC R GEN See Figure NC, NO C NC(OFF) V NC or V NO V or GND, See Figure C 2.5 V pF OFF capacitance C NO(OFF) Switch OFF, NC, NO C NC(ON) V NC or V NO V or GND, See Figure C 2.5 V 140 pF ON capacitance C NO(ON) Switch ON, COM V COM V or GND, C COM(ON) See Figure C 2.5 V 140 pF ON capacitance Switch ON, Digital input C I V I V or GND, See Figure C 2.5 V pF capacitance R L Ω Bandwidth BW See Figure C 2.5 V MHz Switch ON, R L Ω OFF isolation O ISO See Figure C 2.5 V dB f MHz, R L Ω Crosstalk X TALK See Figure C 2.5 V dB f MHz, Total harmonic R L 600 Ω f Hz to kHz, THD C 2.5 V 0.006 distortion C L pF, See Figure Supply C 150 Positive supply I V I V or GND 2.7 V nA current Full 700 (1) The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum Submit Documentation Feedback Copyright 2007, Texas Instruments Incorporated Product Folder Link(s): TS3A24157

www.ti.com Electrical Characteristics for 1.8-V Supply (1) TS3A24157 0.65- Ω DUAL SPDT ANALOG SWITCH DUAL-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER SCDS208A JUNE 2007 REVISED SEPTEMBER 2007 V 1.65 V to 1.95 T A C to C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS T A V MIN TYP MAX UNIT Analog Switch Analog signal V COM V NO V V range V NC C 0.8 1.25 Peak ON NO or V NC V Switch ON, r peak 1.65 V Ω resistance I COM mA, See Figure Full 1.4 C 0.6 0.95 ON-state V NO or V NC 1.5 Switch ON, r on 1.65 V Ω resistance I COM mA, See Figure Full ON-state C 0.1 0.15 resistance match V NO or V NC 0.6 1.5 Switch ON, Δ r on 1.65 V Ω between I COM mA, See Figure Full 0.15 channels NO or V NC V Switch ON, C 0.35 0.13 ON-state I COM mA, See Figure resistance r on(flat) 1.65 V Ω C 0.05 V NO or V NC 0.6 1.5 Switch ON, flatness I COM mA, See Figure Full 0.2 NC, NO V NC or V NO 0.3 V COM 1.65 C I NC(OFF) Switch OFF, OFF leakage or 1.65 nA I NO(OFF) See Figure Full 250 250 current V NC or V NO 1.65 V COM 0.3 NC, NO V NC or V NO 0.3 V COM Open, C I NC(ON) Switch ON, ON leakage or 1.95 V nA I NO(ON) See Figure Full 400 400 current V NC or V NO 1.65 V COM Open, COM V NC or V NO Open, V COM 0.3 C Switch ON, ON leakage I COM(ON) or 1.95 V nA See Figure Full 400 400 current V NC or V NO Open, V COM 1.65 Digital Control Inputs (IN1, IN2) (2) Input logic high V IH Full V Input logic low V IL Full 0.4 V C Input leakage I IH I IL V I 1.95 V or 1.95 V nA current Full 150 (1) The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum (2) All unused digital inputs of the device must be held at V or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs literature number SCBA004. Copyright 2007, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Link(s): TS3A24157

www.ti.com Electrical Characteristics for 1.8-V Supply (1) (Continued) TS3A24157 0.65- Ω DUAL SPDT ANALOG SWITCH DUAL-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER SCDS208A JUNE 2007 REVISED SEPTEMBER 2007 V 1.65 V to 1.95 T A C to C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS T A V MIN TYP MAX UNIT Dynamic C 1.8 V V COM V C L pF, Turn-on time t ON ns 1.65 V to R L Ω See Figure Full 1.95 V C 1.8 V V COM V C L pF, Turn-off time t OFF ns 1.65 V to R L Ω See Figure Full 1.95 V C 1.8 V Break-before- V NC V NO V C L pF, t BBM ns 1.65 V to make time R L Ω See Figure Full 1.95 V V GEN C L nF, Charge injection Q C C 1.8 V pC R GEN See Figure NC, NO C NC(OFF) V NC or V NO V or GND, See Figure C 1.8 V pF OFF capacitance C NO(OFF) Switch OFF, NC, NO C NC(ON) V NC or V NO V or GND, See Figure C 1.8 V 140 pF ON capacitance C NO(ON) Switch ON, COM V COM V or GND, C COM(ON) See Figure C 1.8 V 140 pF ON capacitance Switch ON, Digital input C I V I V or GND, See Figure C 1.8 V pF capacitance R L Ω Bandwidth BW See Figure C 1.8 V MHz Switch ON, R L Ω OFF isolation O ISO See Figure C 1.8 V dB f MHz, R L Ω Crosstalk X TALK See Figure C 1.8 V dB f MHz, Total harmonic R L 600 Ω f Hz to kHz, THD C 1.8 V distortion C L pF, See Figure Supply C 100 Positive supply I V I V or GND 1.95 V nA current Full 600 (1) The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum Submit Documentation Feedback Copyright 2007, Texas Instruments Incorporated Product Folder Link(s): TS3A24157

www.ti.com TYPICAL PERFORMANCE 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0 0.5 1 1.5 2 2.5 V (V)COM r ( )ON Ω –40 Cº 25ºC 85ºC 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 V (V)COM r ( )ON Ω –40 Cº 25ºC 85ºC 0.1 0.2 0.3 0.4 0.5 0.6 0 0.5 1 1.5 2 2.5 3 r ( )ON Ω –40 Cº 25ºC 85ºC V (V)COM –180 –160 –140 –120 –100 –80 –60 –40 –20 0 0.5 1 1.5 2 2.5 3 3.5 V (V)COM Q (pC) C 1.8 V 2.5 V 3 V 1.5 2 2.5 3 3.5 Supply Voltage (V) t /t (ns) ON OFF tOFF tON –16 –14 –12 –10 Frequency (Hz) Gain (dB) 1.8 V 2.5 V 3 V TS3A24157 0.65- Ω DUAL SPDT ANALOG SWITCH DUAL-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER SCDS208A JUNE 2007 REVISED SEPTEMBER 2007 Figure r on vs V COM 1.65 Figure r on vs V COM 2.3 Figure r on vs V COM 2.7 Figure Charge Injection C vs V COM Figure t ON and t OFF vs Supply Voltage Figure Bandwidth Copyright 2007, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Link(s): TS3A24157

www.ti.com –80 –70 –60 –50 –40 –30 –20 –10 Frequency (Hz) THD (dB) 1.8 V 2.5 V 3 V –9E+01 –8E+01 –7E+01 –6E+01 –5E+01 –4E+01 –3E+01 –2E+01 –1E+01 0E+00 1E+04 1E+05 1E+06 1E+07 1E+08 1E+09 Frequency (Hz) Off□Isolation□(dB) 1.8 V 2.5 V 3 V –5.E-08 0.E+00 5.E-08 1.E-07 2.E-07 2.E-07 3.E-07 3.E-07 4.E-07 4.E-07 0 0.5 1 1.5 2 2.5 3 3.5 4 V (V)+ I (A)+ –40 Cº 25ºC 85ºC TS3A24157 0.65- Ω DUAL SPDT ANALOG SWITCH DUAL-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER SCDS208A JUNE 2007 REVISED SEPTEMBER 2007 TYPICAL PERFORMANCE (continued) Figure OFF Isolation and Crosstalk Figure Total Harmonic Distortion vs Frequency Figure Power-Supply Current vs V Submit Documentation Feedback Copyright 2007, Texas Instruments Incorporated Product Folder Link(s): TS3A24157

www.ti.com TS3A24157 0.65- Ω DUAL SPDT ANALOG SWITCH DUAL-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER SCDS208A JUNE 2007 REVISED SEPTEMBER 2007 PIN

DESCRIPTION

NO. NAME V Power supply Copyright 2007, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Link(s): TS3A24157

www.ti.com TS3A24157 0.65- Ω DUAL SPDT ANALOG SWITCH DUAL-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER SCDS208A JUNE 2007 REVISED SEPTEMBER 2007 PARAMETER V COM Voltage at COM V NC Voltage at NC V NO Voltage at NO r on Resistance between COM and NC or COM and NO ports when the channel is ON r peak Peak on-state resistance over a specified voltage range Δ r on Difference of r on between channels in a specific device r on(flat) Difference between the maximum and minimum value of r on in a channel over the specified range of conditions Leakage current measured at the NC port, with the corresponding channel (NC to COM) in the OFF state under I NC(OFF) worst-case input and output conditions I NC(PWROFF) Leakage current measured at the NC port during the power-down condition, V Leakage current measured at the NO port, with the corresponding channel (NO to COM) in the OFF state under I NO(OFF) worst-case input and output conditions I NO(PWROFF) Leakage current measured at the NO port during the power-down condition, V Leakage current measured at the NC port, with the corresponding channel (NC to COM) in the ON state and the output I NC(ON) (COM) open Leakage current measured at the NO port, with the corresponding channel (NO to COM) in the ON state and the output I NO(ON) (COM) open Leakage current measured at the COM port, with the corresponding channel (COM to NO or COM to NC) in the ON state I COM(ON) and the output (NC or NO) open I COM(PWROFF) Leakage current measured at the COM port during the power-down condition, V V IH Minimum input voltage for logic high for the control input (IN) V IL Maximum input voltage for logic low for the control input (IN) V I Voltage at the control input (IN) I IH I IL Leakage current measured at the control input (IN) Turn-on time for the switch. This parameter is measured under the specified range of conditions and by the propagation t ON delay between the digital control (IN) signal and analog output (COM, NC, or NO) signal when the switch is turning ON. Turn-off time for the switch. This parameter is measured under the specified range of conditions and by the propagation t OFF delay between the digital control (IN) signal and analog output (COM, NC, or NO) signal when the switch is turning OFF. Break-before-make time. This parameter is measured under the specified range of conditions and by the propagation t BBM delay between the output of two adjacent analog channels (NC and NO) when the control signal changes state. Charge injection is a measurement of unwanted signal coupling from the control (IN) input to the analog (NC, NO, or Q C COM) output. This is measured in coulomb (C) and measured by the total charge induced due to switching of the control input. Charge injection, Q C C L Δ V COM C L is the load capacitance and Δ V COM is the change in analog output voltage. C NC(OFF) Capacitance at the NC port when the corresponding channel (NC to COM) is OFF C NO(OFF) Capacitance at the NO port when the corresponding channel (NO to COM) is OFF C NC(ON) Capacitance at the NC port when the corresponding channel (NC to COM) is ON C NO(ON) Capacitance at the NO port when the corresponding channel (NO to COM) is ON C COM(ON) Capacitance at the COM port when the corresponding channel (COM to NC or COM to NO) is ON C I Capacitance of control input (IN) OFF isolation of the switch is a measurement of OFF-state switch impedance. This is measured in dB in a specific O ISO frequency, with the corresponding channel (NC to COM or NO to COM) in the OFF state. Crosstalk is a measurement of unwanted signal coupling from an ON channel to an OFF channel (NC to NO or NO to X TALK NC). This is measured in a specific frequency and in dB. BW Bandwidth of the switch. This is the frequency in which the gain of an ON channel is dB below the DC gain. Total harmonic distortion describes the signal distortion caused by the analog switch. This is defined as the ratio of root THD mean square (RMS) value of the second, third, and higher harmonic to the absolute magnitude of the fundamental harmonic. I Static power-supply current with the control (IN) pin at V or GND Submit Documentation Feedback Copyright 2007, Texas Instruments Incorporated Product Folder Link(s): TS3A24157

www.ti.com PARAMETER MEASUREMENT INFORMATION ICOM ron = ICOM GND Channel ON NC VI NO COM VCOM VI= V IH or V IL VNO VNC IN /C0087 VCOM ±VNO or VNC Channel OFF OFF-State Leakage Current VI= V IH or V IL GND NC VI NO COM V COM VNO VNC IN Channel ON ON-State Leakage Current VI= V IH or V IL GND NC VI NO COM VCOM VNO VNC IN TS3A24157 0.65- Ω DUAL SPDT ANALOG SWITCH DUAL-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER SCDS208A JUNE 2007 REVISED SEPTEMBER 2007 Figure 10. ON-State Resistance on Figure 11. OFF-State Leakage Current NC(OFF) I NC(PWROFF) I NO(OFF) I NO(PWROFF) I COM(OFF) I COM(PWROFF) Figure 12. ON-State Leakage Current COM(ON) I NC(ON) I NO(ON) Copyright 2007, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Link(s): TS3A24157

www.ti.com GND VBI AS VI VI = V + or GND VBI AS = V + or GND Capacitance is measured at NC, NO, COM, and IN inputs during ON and OFF conditions. Capacitance Meter VCOM VNO VNC COM NO NC IN C L(2) R L VCOM GND NC or NO VNC or V NO VI NC or NO COM (1) VCOM 50 Ω R L C L 35 pFtON TEST V+50 Ω 35 pFtOFF 50% tON tOFF 50% 90% 90% Logic Input (VI) (VNC or V NO ) C L(2) R L IN TS3A24157 0.65- Ω DUAL SPDT ANALOG SWITCH DUAL-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER SCDS208A JUNE 2007 REVISED SEPTEMBER 2007 PARAMETER MEASUREMENT INFORMATION (continued) Figure 13. Capacitance I C COM(ON) C NC(OFF) C NO(OFF) C NC(ON) C NO(ON) All input pulses are supplied by generators having the following characteristics: PRR MHz, Z O Ω t r ns, t f ns. C L includes probe and jig capacitance. Figure 14. Turn-On ON and Turn-Off Time OFF Submit Documentation Feedback Copyright 2007, Texas Instruments Incorporated Product Folder Link(s): TS3A24157

www.ti.com GND NC or NO VNC or V NO VI NC or NO COM VCOM C L(2) R L tBBM 50% 90% 90% Logic Input (VI) (VCOM ) IN VNC or VNO = V+ R L = 50 /C0087 C L = 35 pF Logic Input(1) GND NC VI NO COM 50 /C0087 50 /C0087 VNC VCOM Channel ON: NC to COM Network Analyzer Setup Source Powe r = 0 dBm (632-mV P-P at 50-/C0087 load) DC Bias = 350 mV Network Analyzer Source Signal VI = V+ or GND IN TS3A24157 0.65- Ω DUAL SPDT ANALOG SWITCH DUAL-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER SCDS208A JUNE 2007 REVISED SEPTEMBER 2007 PARAMETER MEASUREMENT INFORMATION (continued) All input pulses are supplied by generators having the following characteristics: PRR MHz, Z O Ω t r ns, t f ns. C L includes probe and jig capacitance. Figure 15. Break-Before-Make Time BBM Figure 16. Bandwidth (BW) Copyright 2007, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Link(s): TS3A24157

www.ti.com NC NO COM VNC VCOM Channel OFF: NC to COM Network Analyzer Setup Source Power = 0 dBm (632-mV P-P at 50-/C0087 load) 50 /C0087 GND 50 /C0087 50 /C0087 Network Analyzer Source Signal VI VI = V + or GND IN DC Bias = 350 mV NC NO 50 /C0087 50 /C0087 VNC VCOM Channel ON: NC to COM Network Analyzer Setup Source Power = 0 dBm (632-mV P-P at 50-/C0087 load) 50 /C0087 GND VNO Source Signal Channel OFF: NO to COM Network Analyzer VI VI = V+ or GND IN DC Bias = 350 mV TS3A24157 0.65- Ω DUAL SPDT ANALOG SWITCH DUAL-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER SCDS208A JUNE 2007 REVISED SEPTEMBER 2007 PARAMETER MEASUREMENT INFORMATION (continued) Figure 17. OFF Isolation ISO Figure 18. Crosstalk TALK Submit Documentation Feedback Copyright 2007, Texas Instruments Incorporated Product Folder Link(s): TS3A24157

www.ti.com GND NC or NO IN R GEN VI NC or NO COM V COM C L(2) OFF VCOM ON OFF DVCOM VGEN VI= V IH or V IL C L = 1 nF VGEN = 0 to V+ R GEN = 0 Q C = C L ×⋅DVCOM VIH VIL Logic Input (VI) Logic Input(1) GND NO COM 10 /C0109F C L(1) R L 10 /C0109F INVI 600 /C0087600 /C0087 600 /C0087 Audio Analyzer Source Signal Source Signal = 20 Hz to 20 kHz Channel ON: COM to NO VI= V IH or V IL R L = 600 /C0087 C L = 50 pF V+/2 VSOURCE = V+ P-P TS3A24157 0.65- Ω DUAL SPDT ANALOG SWITCH DUAL-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER SCDS208A JUNE 2007 REVISED SEPTEMBER 2007 PARAMETER MEASUREMENT INFORMATION (continued) All input pulses are supplied by generators having the following characteristics: PRR MHz, Z O Ω t r ns, t f ns. C L includes probe and jig capacitance. Figure 19. Charge Injection C C L includes probe and jig capacitance. Figure 20. Total Harmonic Distortion (THD) Copyright 2007, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Link(s): TS3A24157

Orderable Device Status(1) Package Type Package Drawing Pins Package Qty Eco Plan(2) Lead/Ball FinishMSL Peak Temp (3) TS3A24157DGSR ACTIVE MSOP DGS 10 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TS3A24157DGSRG4 ACTIVE MSOP DGS 10 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TS3A24157RSER ACTIVE QFN RSE 10 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TS3A24157RSERG4 ACTIVE QFN RSE 10 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM (1)The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2)Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontentfor the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS):TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt):This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br):TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. PACKAGE OPTION ADDENDUM www.ti.com 12-Oct-2007 Addendum-Page 1

TAPE AND REEL BOX INFORMATION Device Package Pins Site Reel Diameter (mm) Reel Width (mm) A0 (mm) B0 (mm) K0 (mm) P1 (mm) W (mm) Pin1 Quadrant TS3A24157RSER RSE 10 SITE 48 179 8 1.75 2.25 0.65 4 8 Q1 PACKAGE MATERIALS INFORMATION www.ti.com 4-Oct-2007 Pack Materials-Page 1

Device Package Pins Site Length (mm) Width (mm) Height (mm) TS3A24157RSER RSE 10 SITE 48 220.0 205.0 50.0 PACKAGE MATERIALS INFORMATION www.ti.com 4-Oct-2007 Pack Materials-Page 2

(TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for design. Customers are responsible for their products and components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products amplifier.ti.com Audio www.ti.com/audio Data Converters dataconverter.ti.com Automotive www.ti.com/automotive DSP dsp.ti.com Broadband www.ti.com/broadband Interface interface.ti.com Digital Control www.ti.com/digitalcontrol Logic logic.ti.com Military www.ti.com/military Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork Microcontrollers microcontroller.ti.com Security www.ti.com/security RFID www.ti-rfid.com Telephony www.ti.com/telephony Low Power www.ti.com/lpw Video Imaging www.ti.com/video Wireless Wireless www.ti.com/wireless Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright 2007, Texas Instruments Incorporated