TS31023 ETC2 | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 16

Technical content

Triune Systems Proprietary & Confidential Information DO NOT DUPLICATE - 1 - TS31023/223 Version 1.1 Specifications subject to change WWW.TRIUNESYSTEMS.COM Copyright © 2012, Triune Systems, LLC High Input Voltage Linear Regulator DESCRIPTION FEATURES TYPICAL APPLICATION VOUT FB EN VIN Vref The TS31x23 high voltage linear regulator consists of a low power amplifier with a high voltage p-channel pass gate. The linear regulator has a wide o perating range, and is ideal for systems that may have large voltage transients and require the output load to remain regulated. An analog current limit is used to limit output current and protect the regulator from external short circuits.

APPLICATIONS

 Set-top Boxes  Automotive  Industrial  Medical  Energy harvesting systems  Wireless Power  Wide input supply operating range  TS31023 : 5V-16V  TS31223 : 5V-36V  Adjustable output voltage from 1.25V to VIN - Vdropout  60mA output current capability  Enable control function SUMMARY SPECIFICATIONS  Ambient operating temperature 0C to 85C  Packaged in a 8pin DFN (2x2)

  • 2 - TS31023/223 Version 1.1 Specifications subject to change WWW.TRIUNESYSTEMS.COM Copyright © 2012, Triune Systems, LLC Triune Systems Proprietary & Confidential Information DO NOT DUPLICATE PIN-OUT CONFIGURATION PIN # NAME I/O/P DESCRIPTION

1 GND P Ground

2 VOUT O Regulated Output Voltage

3 N/C No Connect

4 N/C No Connect

5 N/C No Connect

6 FB I Feedback Voltage

7 VIN P Input Voltage

8 EN I ENABLE Input

Over operating free–air temperature range unless otherwise noted(1,2) UNIT VIN -0.3 to 18 (TS31023) -0.3 to 40 (TS31223) V VOUT -0.3 to 18 (TS31023) -0.3 to 40 (TS31223) V EN, FB -0.3 to 6.0 V Electrostatic Discharge – Human Body Model 2 kV Maximum junction temperature, TJ 150 C Storage temperature range, Tstg -65 to 150 C Lead Temperature (soldering, 10 seconds) 260 C Note 1: Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are st ress ratings only, and functional operation of the device at these or any other conditions beyond those i ndicated under “recommended operating conditions” is not implied. Exposure to absolute–maximum–rated conditions for extended periods may affect device reliability. Note 2: All voltage values are with respect to network ground terminal. THERMAL CHARACTERISTICS Package DFN JA (C/W) (See Note 4) JC (C/W) (See Note 5) 8 pin 73.1 10.7 Note 4: This assumes a FR4 board only. Note 5: This assumes a 1oz. Copper JEDEC standard board with thermal vias. See Exposed Pad section and application note for more information.

  • 3 - TS31023/223 Version 1.1 Specifications subject to change WWW.TRIUNESYSTEMS.COM Copyright © 2012, Triune Systems, LLC Triune Systems Proprietary & Confidential Information DO NOT DUPLICATE RECOMMENDED OPERATING CONDITIONS Parameter Min Max Unit Unregulated Supply Input Voltage (VIN) 5 16 (TS31023) 36 (TS31223) V Enable Input (EN) 0 5 V Regulated Supply Output Voltage (VOUT) 1.25 VIN - Vdropout V Operating Junction Temperature, TJ -40 125 °C CHARACTERISTICS Electrical characteristics, VIN = 12V, TJ = 25C, unless otherwise noted Symbol Parameter Condition Min Typ Max Unit VIN Input Supply Voltage TS31023 5 16 V TS31223 5 36 V VOUT Output Voltage 1.25 VIN - Vdropout V FB Feedback Voltage VIN = 12V 1.10 1.20 1.30 V COUT Output Bypass Capacitor 1 2.2 4.7 uF Ioff(VIN) Disabled Current EN=0V, VIN=12V 1 uA Iqq(VIN) Quiescent Current EN=5V, Iout = 0 220 uA Iout Load Capability 60 mA VLine DC Line Regulation (TS31023) VIN = 5.5V to 16V, Vout=5.0V, Iout = 5mA 0.1 0.6 % DC Line Regulation (TS31223) VIN = 5.5V to 36V, Vout=5.0V, Iout = 5mA 0.1 0.6 % VLoad DC Load Regulation (TS31023) VIN = 12V, Vout=5.0V, Iout = 1mA to 60mA 0.02 0.35 % VIN = 6V, Vout=5.0V, Iout = 1mA to 60mA 0.02 0.15 % Ilimit Current Limit Vin =12V 100 mA
  • 4 - TS31023/223 Version 1.1 Specifications subject to change WWW.TRIUNESYSTEMS.COM Copyright © 2012, Triune Systems, LLC Triune Systems Proprietary & Confidential Information DO NOT DUPLICATE TYPICAL CHARACTERISTICS
  • 5 - TS31023/223 Version 1.1 Specifications subject to change WWW.TRIUNESYSTEMS.COM Copyright © 2012, Triune Systems, LLC Triune Systems Proprietary & Confidential Information DO NOT DUPLICATE VCC = 4.9V
  • 6 - TS31023/223 Version 1.1 Specifications subject to change WWW.TRIUNESYSTEMS.COM Copyright © 2012, Triune Systems, LLC Triune Systems Proprietary & Confidential Information DO NOT DUPLICATE PACKAGE MECHANICAL DRAWINGS
  • 7 - TS31023/223 Version 1.1 Specifications subject to change WWW.TRIUNESYSTEMS.COM Copyright © 2012, Triune Systems, LLC Triune Systems Proprietary & Confidential Information DO NOT DUPLICATE RECOMMENDED PCB LAND PATTERN
  • 8 - TS31023/223 Version 1.1 Specifications subject to change WWW.TRIUNESYSTEMS.COM Copyright © 2012, Triune Systems, LLC Triune Systems Proprietary & Confidential Information DO NOT DUPLICATE APPLICATION USING A MULTI-LAYER PCB To maximize the efficiency of this package for application on a single layer or multi -layer PCB, certain guidelines must be followed when laying out this part on the PCB. The following are guidelines for mounting the exposed pad IC on a Multi -Layer PCB with ground a plane. JEDEC standard FR4 PCB Cross-section: Multi-Layer Board (Cross-sectional View) In a multi -layer board application, the thermal vias are the primary method of heat transfer from the package thermal pad to the internal ground plane. The efficiency of this method depends on several factors, including die area, number of thermal v ias, thickness of copper, etc. Package Thermal Pad Solder Pad (Land Pattern) Thermal Via's Package Outline Package and PCB Land Configuration For a Multi-Layer PCB (square) Package Solder Pad Package Solder Pad (bottom trace) Thermal Via Component Traces Thermal Isolation Power plane only 1.5748mm 0.0 - 0.071 mm Board Base & Bottom Pad 0.5246 - 0.5606 mm Power Plane (1oz Cu) 1.0142 - 1.0502 mm Ground Plane (1oz Cu) 1.5038 - 1.5748 mm Component Trace (2oz Cu) 2 Plane

4 Plane

  • 9 - TS31023/223 Version 1.1 Specifications subject to change WWW.TRIUNESYSTEMS.COM Copyright © 2012, Triune Systems, LLC Triune Systems Proprietary & Confidential Information DO NOT DUPLICATE The above drawing is a representation of how the heat can be conducted away from the die using an exposed pad package. Each application will have different requirements and limitations and therefore the user should use sufficient copper to dissipate the power in the system. The output current rating for the linear regulators may have to be de -rated for ambient temperatures above 85C. The de -rate value will depend on calculated worst case power dissipation an d the thermal management implementation in the application. APPLICATION USING A SINGLE LAYER PCB Layout recommendations for a Single Layer PCB: utilize as much Copper Area for Power Management. In a single layer board application the thermal pad is at tached to a heat spreader (copper areas) by using low thermal impedance attachment method (solder paste or thermal conductive epoxy). In both of the methods mentioned above it is advisable to use as much copper traces as possible to dissipate the heat. IMPORTANT: If the attachment method is NOT implemented correctly, the functionality of the product is not guaranteed. Power dissipation capability will be adversely affected if the device is incorrectly mounted onto the circuit board. Mold compound Die Epoxy Die attach Exposed pad Solder Thermal Vias with Cu plating Single Layer, 2oz Cu Ground Layer, 1oz Cu Signal Layer, 1oz Cu Bottom Layer, 2oz Cu 20% Cu coverage 90% Cu coverage 5% - 10% Cu coverage Note: NOT to Scale Use as much Copper Area as possible for heat spread Package Thermal Pad Package Outline
  • 10 - TS31023/223 Version 1.1 Specifications subject to change WWW.TRIUNESYSTEMS.COM Copyright © 2012, Triune Systems, LLC Triune Systems Proprietary & Confidential Information DO NOT DUPLICATE IR REFLOW PROFILE
  • 11 - TS31023/223 Version 1.1 Specifications subject to change WWW.TRIUNESYSTEMS.COM Copyright © 2012, Triune Systems, LLC Triune Systems Proprietary & Confidential Information DO NOT DUPLICATE
  • 12 - TS31023/223 Version 1.1 Specifications subject to change WWW.TRIUNESYSTEMS.COM Copyright © 2012, Triune Systems, LLC Triune Systems Proprietary & Confidential Information DO NOT DUPLICATE ROHS AND REACH COMPLIANCE Triune Systems is fully committed to environmental quality. All Triune Systems materials and suppliers are fully compliant with RoHS (European Union Directive 2011/65/EU), REACH SVHC Chemical Restrictions (EC 1907/2006), IPC-1752 Level 3 materials declarations, and their subsequent amendments. Triune Systems maintains certified laboratory reports for all product materials, from all suppliers, which show full compliance to restrictions on the following:  Cadmium (Cd)  Chlorofluorocarbons (CFCs)  Chlorinate Hydrocarbons (CHCs)  Halons  Hexavalent Chromium (CrVI)  Hydrobromofluorocarbons (HBFCs)  Hydrochlorofluorocarbons (HCFCs)  Lead (Pb)  Mercury (Hg)  Perfluorocarbons (PFCs)  Polybrominated biphenyls (PBB)  Polybrominated Diphenyl Ethers (PBDEs)
  • 13 - TS31023/223 Version 1.1 Specifications subject to change WWW.TRIUNESYSTEMS.COM Copyright © 2012, Triune Systems, LLC Triune Systems Proprietary & Confidential Information DO NOT DUPLICATE

ORDERING INFORMATION

Part Number: TS31023-CDFNR (7 inch reel) TS31023-CDFNR-13 (13 inch reel) TS31223-CDFNR (7 inch reel) TS31223-CDFNR-13 (13 inch reel) REEL DIMENSIONS (7 INCH)

  • 14 - TS31023/223 Version 1.1 Specifications subject to change WWW.TRIUNESYSTEMS.COM Copyright © 2012, Triune Systems, LLC Triune Systems Proprietary & Confidential Information DO NOT DUPLICATE REEL DIMENSIONS (13 INCH)
  • 15 - TS31023/223 Version 1.1 Specifications subject to change WWW.TRIUNESYSTEMS.COM Copyright © 2012, Triune Systems, LLC Triune Systems Proprietary & Confidential Information DO NOT DUPLICATE CARRIER TAPE SPECIFICATION
  • 16 - TS31023/223 Version 1.1 Specifications subject to change WWW.TRIUNESYSTEMS.COM Copyright © 2012, Triune Systems, LLC Triune Systems Proprietary & Confidential Information DO NOT DUPLICATE Legal Notices Information contained in this publication regarding device applications and the like is provided only for your convenience an d may be superseded by updates. It is your responsibility to ensure that your application meets with your s pecifications. “Typical” parameters which may be provided in Triune Systems data sheets and/or specifications can and do vary in different applications and actual performance may vary over time . All operating parameters, including “Typicals” must be validated for your application by your technical experts. TRIUNE SYSTEMS MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDI TION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Triune Systems disclaims all liability arising from this information and its use. Triune System products are not des igned, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Triune Systems product could create a situation where personal injury or de ath may occur. Should the Buyer purchase or use Triune Systems products for any such unintended or unauthorized application, the Buyer shall indemnify and hold Triune Systems, and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unautho rized use, even if such claim alleges that Triune Systems was negligent regarding the design or manufacture of the part. No licenses are conveyed, implicitly or otherwise, under any Triune Systems intellectual property rights. Trademarks All other trademarks mentioned herein are property of their respective companies. © 2012 Triune Systems, LLC. All Rights Reserved.