TS19721D TSC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

Document Number: DS_P0000278 1 Version: A15 Single-Stage PFC Buck Current Control LED Driver With High Voltage MOSFET Integrated

DESCRIPTION

TS19721D a very efficient constant current controll er for driving LED lamps in non-dimmable lighting applications. The IC provides a high power factor correction and constant current accuracy with boundary conduction mode (BCM) operation in a single stage buck topology. The TS19721D controller is easy to integrate with a small BOM and includes an internal high voltage power MOSFET for PWM control. Total harmonic distortion (THD) and efficiency are optimized by an external resistor. The line and loa d regulation of LED current are easily maintained to within ±2.5%. TS19721D also provides V CC over- voltage protection, and output open/short circuit protection. FEATUR ES

  • Integrated 600V Power MOSFET
  • Low THD <20% (Option)
  • Constant current accuracy within ±2.5%
  • High Power Factor Correction >0.9
  • Boundary Current Mode control
  • LED open protection & short protection
  • Over current protection (OCP)
  • Over temperature protection (OTP)
  • Compliant to RoHS directive 2011/65/EU and in accordance to WEEE 2002/96/EC.
  • Halogen-free according to IEC 61249-2-21 definition. APPLICATION
  • LED lighting system SOP -8 Pin Definition : 1. CS 2. COM 3. N/C 4. Drain 5. RT 6. GND 7. VCC 8. CS Notes: Moisture sensitivity level: level 3. Per J-STD-020 ABSOLUTE MAXIMUM RATINGS (TA = 25°C unless otherwise specified) (Note 1) PARAMETER SYMBOL LIMIT UNIT Power Supply Pin VCC 40 V RT Voltage to GND VRT -0.3 to 5.5 V DRAIN Voltage to GND VOUT -0.3 to 620 V CS Voltage to GND VCS -0.3 to 5.5 V COM Voltage to GND VCOM -0.3 to 5.5 V Junction Temperature Range TJ -40 to +150 °C Storage Temperature Range TSTG -65 to +150 °C Lead Temperature (Soldering 10 sec) T LEAD 260 °C Power Dissipation @ TA=25 °C PD 0.3 W ESD Rating (Human Body Mode) (Note 2) HBM 2 kV ESD Rating (Machine Mode) (Note 2) MM 200 V

Document Number: DS_P0000278 2 Version: A15 THERMAL PERFORMANCE (Note 3) PARAMETER SYMBOL LIMIT UNIT Thermal Resistance - Junction to Case R ӨJC 106.6 oC/W Thermal Resistance - Junction to Ambient R ӨJA 220 oC/W RECOMMENDED OPERATING CONDITION (TA = 25°C unless otherwise specified) (Note 4) PARAMETER SYMBOL LIMIT UNIT Power Supply Pin VCC 33 V RT Voltage to GND VRT -0.3 to 5 V DRAIN Voltage to GND VOUT -0.3 to 620 V CS Voltage to GND VCS -0.3 to 5 V COM Voltage to GND VCOM -0.3 to 5 V Operating Junction Temperature Range T J -40 to +150 °C Operating Ambient Temperature Range T OPA -40 to +85 °C ELECTRICAL SPECIFICATIONS (TA = 25°C unless otherwise specified) PARAMETER SYMBOL CONDITION MIN TYP MAX UNIT Supply Voltage Start-up Current V CC(ST) V CC = V UVLO(on) -1V -- 45 -- μA Operating Current I OPA With 1nF load on out pin -- 2.1 2.6 mA UVLO(off) V UVLO(off) 7 8 9 V UVLO(on) V UVLO(on) 16 17.5 19 V OVP Level on V CC Pin V OVP 29 31 33 V Voltage Feedback Feedback Reference Voltage V FB 0.196 0.2 0.204 V Transconductanc e GM -- 58 -- μS Output Sink Current I O-SINK -- 5.8 -- μA Output Source Current I O-SOURCE -- 5.8 -- μA Current Sensing CS Limit Voltage V OCP -- 1.4 -- V Open Loop Voltage V OLP CS Pin Open -- 5 -- V Leading-Edge Blanking Time LEB t -- 400 -- ns Delay to Output -- 100 -- ns Switching Frequency Start Frequency fSTR 3 4.5 6 kHz Maximum On Time TON(MAX) 14 -- -- μs Thermal Section (Note 5, 6) Thermal Shutdown -- 150 -- °C Thermal Shutdown Release -- 120 -- °C

Document Number: DS_P0000278 3 Version: A15 ELECTRICAL SPECIFICATIONS (TA = 25°C unless otherwise specified) PARAMETER SYMBOL CONDITION MIN TYP MAX UNIT MOSFET Section (Note 7) Drain-Source Breakdown Voltage BV DS V GS = 0V, I D = 250µA 600 -- -- V Zero Gate Voltage Drain Current IDSS V DS = 600V, V GS = 0V -- -- 10 µA MOSFET Section (Note 8,9) Continuous Drain Current I D T C=25 °C -- -- 2 A Pulsed Drain Current I DM -- -- 8 A Drain-Source On-Resistance R DS(ON) V GS = 10V, I D = 1A -- -- 4.4 Ω Single Pulse Avalanche Energy E AS VDD =50V, I AS =2A, L=25mH, R G =25Ω -- -- 55 mJ Input Capacitance C ISS VDS = 25V, V GS = 0V, f = 1.0MHz -- 249 -- pF Output Capacitance C OSS -- 30.7 -- Reverse Transfer Capacitance C RSS -- 5 -- Turn-On Delay Time t d(on) VGS = 10V, I D = 2A, VDD = 300V, R G =25Ω -- 9.1 -- ns Turn-On Rise Time t r -- 9.8 -- Turn-Off Delay Time t d(off) -- 17.4 -- Turn-Off Fall Time t f -- 12.4 -- Note: 1. Stresses listed as the above “Absolute Maximum Ratings” may cause permanent damage to the device. These are for stress ratings. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may remain possibility to affect device reliability. 2. Devices are ESD sensitive. Handing precaution re commended. 3. Thermal Resistance is specified with the compone nt mounted on a low effective thermal conductivity test board in free air at TA=25 °C. 4. The device is not guaranteed to function outside its operating conditions. 5. Guaranteed by design. 6. Auto Recovery Type. 7. Pulse test: PW ≤ 300µs, duty cycle ≤ 2% 8. For DESIGN AID ONLY. Limited by maximum junction temperature. 9. Switching time is essentially independent of ope rating temperature.

Document Number: DS_P0000278 4 Version: A15

ORDERING INFORMATION

PART NO. PACKAGE PACKING TS19721DCS RLG SOP-8 2,500pcs / 13” Reel Note: 1. Compliant to RoHS Directive 2011/65/EU and in ac cordance to WEEE 2002/96/EC. 2. Halogen-free according to IEC 61249-2-21 definit ion. Function Block PIN DESCRIPTION PIN NO. NAME FUNCTION 1,8 CS Input current sense pin. 2 COM Output pin of error amplifier. 3 N/C No Connect. 4 Drain Drain of internal HV MOS. 5 RT Efficiency / THD option pin. 6 GND Ground return for all internal circuitry. 7 VCC Power supply pin for all internal circuitry.

Document Number: DS_P0000278 5 Version: A15

APPLICATION INFORMATION

The typical start-up current is around 45 μA. The very low start-up current allows the PWM con troller to operate with a high value start-up resistor and reduce overall power dissipation. UVLO(Under Voltage Lockout) A hysteretic UVLO comparator is implemented in TS19 721D. The turn-on and turn-off thresholds level are fixed at 17.5V and 8V respectively. This hysteresis shown in Fig.1 ensures that the start-up capacitor will be adequate to supply the chip during start-up. For quick start-up of the LED driver, the start-up resistor & capacit or needs to optimize for application. LEB(Leading-Edge Blanking) Each time the power MOSFET is switched on, a turn-o n spike will inevitably occur at the sense resistor . A 400ns leading-edge blanking time is built in to avoid a f alse trigger.. Conventional RC filtering can theref ore be omitted. During this blanking period, the current-limit comparator is disabled and cannot switch off the gate driver. OCP(Over Current Protection) The TS19721D has built-in cycle-by-cycle over-curre nt protection functions available at the CS pin. Wh en the CS pin voltage is larger than V OCP (1.4V), the gate output will be turned off immedia tely to avoid over temperature damage. OVP (Over Voltage Protection) on V CC To prevent the LED driver from being damaged, the T S19721D has an integrated OVP on V CC . When the V CC voltage is higher than the V OVP (31V), the output MOSFET will be shut down immedia tely. The OVP on the V CC pin will automatically recover.. If the OVP triggers, t he output PWM pulses will be stopped until the V CC pin voltage returns to the UVLO off level when the TS19721D will automatically recover as shown in Fig. 2. Fig. 1 Fig. 2

Document Number: DS_P0000278 6 Version: A15 PACKAGE OUTLINE DIMENSIONS (Unit: Millimeters) SOP-8 SUGGESTED PAD LAYOUT (Unit: Millimeters) MARKING DIAGRAM x = Series code Y = Year Code M = Month Code for Halogen Free Product O =Jan P =Feb Q =Mar R =Apr S =May T =Jun U =Jul V =Aug W =Sep X =Oct Y =Nov Z =Dec L = Lot Code (1~9, A~Z)

Document Number: DS_P0000278 7 Version: A15 Notice Specifications of the products displayed herein are subject to change without notice. TSC or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, to any intellectual property rights is granted by this document. Except as provided in TSC’s terms and co nditions of sale for such products, TSC assumes no liability wh atsoever, and disclaims any express or implied warr anty, relating to sale and/or use of TSC products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applica tions. Customers using or selling these products for use i n such applications do so at their own risk and agr ee to fully indemnify TSC for any damages resulting from such improper use or sale.