TS12A12511DGKR

Online Datasheet

Read TS12A12511DGKR online.

TS12A12511_14 TI1 | Alldatasheet

Document overview

Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
PDF pages: 25

Technical content

N.C. DCN PACKAGE (TOP VIEW) DRJ PACKAGE (TOP VIEW) DGK PACKAGE (TOP VIEW) COM NC GND NO IN N.C. COM NC GND NO IN N.C. 4 5 TS12A12511 www.ti.com SCDS248B –OCTOBER 2009–REVISED APRIL 2011 ±6V/+12V,5Ω,LOW rON SINGLESPDTANALOGSWITCH Check forSamples: TS12A12511 1FEATURES

±2.7V to ±6 V Dual Supply
2.7V to12 V SingleSupply
5-Ω (typ)ON-StateResistance
1.6-Ω (typ)ON-StateResistanceFlatness
3.3-V,5-V Compatible DigitalControlInputs
Rail-to-RailAnalog SignalHandling
FasttON ,tOFF Times
Tiny8-Lead SOT-23, 8-Lead MSOP, and QFN-8 Packages
Latch-Up Performance Exceeds 100 mA Per JESD 78,Class II
ESD Performance Tested per JESD 22 – 2000-V Human-Body Model (A114-B,Class II) – 1000-V Charged-DeviceModel (C101)

APPLICATIONS

Automatic TestEquipment
Power Routing
Communication Systems
Data AcquisitionSystems
Sample-and-Hold Systems
Relay Replacement
Battery-PoweredSystems N.C.– Not internallyconnected NC – Normallyclosed NO – Normallyopen The Exposed ThermalPad must be electricallyconnectedtoV– orleftfloating. DESCRIPTION/ORDERING INFORMATION The TS12A12511 isa single-poledouble-throw(SPDT) analogswitchcapableofpassingsignalswithswingsof 0 to12 V or –6 V to6 V. Thisswitchconductsequallywellinbothdirectionswhen itison.Italsooffersa low ON-stateresistanceof 5 Ω (typical),which is matched to within1 Ω between channels.The max current consumptionis<1 μA and –3 dB bandwidthis>93 MHz. The TS12A12511 exhibitsbreak-before-makeswitching action,preventingmomentary shortingwhen switchingchannels.Thisdeviceisavailablepackaged inan 8-lead MSOP, 8-leadSOT-23, and a 8-pinQFN. Pleasebe aware thatan importantnoticeconcerningavailability,standardwarranty,and use incriticalapplicationsofTexas Instrumentssemiconductorproductsand disclaimerstheretoappearsattheend ofthisdatasheet. UNLESS OTHERWISE NOTED this document contains Copyright© 2009–2011,Texas InstrumentsIncorporatedPRODUCTION DATA informationcurrentas of publicationdate. Products conform to specificationsper the terms of Texas Instrumentsstandardwarranty.Productionprocessingdoes not necessarilyincludetestingofallparameters.

SCDS248B –OCTOBER 2009–REVISED APRIL 2011 www.ti.com Table1. ORDERING INFORMATION TA PACKAGE (1)(2) ORDERABLE PART NUMBER TOP-SIDE MARKING MSOP – DGK Tape and reel TS12A12511DGKR 2US –40°C to85°C QFN – DRJ Tape and reel TS12A12511DRJR ZVE SOT – DCN Tape and reel TS12A12511DCNR NFH (1) Package drawings,thermaldata,and symbolizationareavailableatwww.ti.com/packaging. (2) Forthemost currentpackage and orderinginformation,see thePackage OptionAddendum attheend ofthisdocument,orsee theTI websiteatwww.ti.com. TRUTH TABLE IN NC TO COM, COM TO NC NO TO COM, COM TO NO L On Off H Off On ABSOLUTE MAXIMUM RATINGS (1) TA = 25°C (unlessotherwisenoted). MIN MAX UNIT V+ toV– 13 V V+ toGND –0.3 13 V V– toGND –6.5 0.3 V VI/O Analoginputs V– – 0.5 V + + 0.5 V IIN Digitalinputs ±30 mA Peak current NC, NO, orCOM ±100 mA II/O Continuouscurrent NC, NO, orCOM ±50 mA Tstg Storagetemperaturerange –65 150 °C TA Operatingtemperaturerange –40 85 °C (1) Stressesbeyond thoselistedunder“absolutemaximum ratings” may cause permanentdamage tothedevice.These arestressratings only,and functionaloperationofthedeviceattheseorany otherconditionsbeyond thoseindicatedunder“recommended operating conditions” isnotimplied.Exposuretoabsolute-maximum-ratedconditionsforextendedperiodsmay affectdevicereliability. THERMAL IMPEDANCE RATINGS UNIT DCN package 220 θJA Package thermalimpedance DGK package 173 °C/W DRJ package 103

2 Copyright© 2009–2011,Texas InstrumentsIncorporated

www.ti.com SCDS248B –OCTOBER 2009–REVISED APRIL 2011

ELECTRICAL CHARACTERISTICS

±5-V Dual Supply V+ = 5 V ± 10%, V- = -5V ± 10%, TA = –40°C to85°C (unlessotherwisenoted) TA = 25°C TA = –40°C to85°C PARAMETER SYMBOL TEST CONDITIONS UNIT MIN TYP MAX MIN TYP MAX Analog Switch Analogsignalrange V– V+ V VNC = -4.5V to+4.5V ON-stateresistance rON orVNO = –4.5V to4.5V,ICOM = –10 mA; 5 5 8 Ω see Figure12 ON-stateresistance VNC = -4.5V to+4.5V match between ΔrON orVNO = -4.5V to+4.5V, 1 1.2 1.6 Ω channels ICOM = –10 mA Leakage Currents DigitalInputs High-levelinput VINH 2.4 V+ Vvoltage Low-levelinput VINL 0 0.8 Vvoltage Inputcurrent IINL,IINH VIN = VINL orVINH 0.005 ±1 μA Controlinput C IN 2.5 pFcapacitance Dynamic (1) R L = 300 Ω,C L = 35 pF,Turn-ON time tON 80 95 115 nsVCOM = 3.3V;see Figure16 R L = 300 Ω,C L = 35 pF,Turn-OFF time tOFF 41 50 56 nsVCOM = 3.3V Break-before-make R L = 300 Ω,C L = 35 pF,tBBM 36 18 nstimedelay VNC = VNO = 3.3V;see Figure17 VNC = VNO = 0 V,R GEN = 0 Ω,C L = 1 nF;Charge injection Q C 26 pCsee Figure18 R L = 50 Ω,C L = 5 pF,f= 1 MHz;OFF isolation O ISO –70 dBsee Figure19 Channel-to-channel R L = 50 Ω,C L = 5 pF,f= 1 MHz,XTALK –70 dBcrosstalk see Figure20 Bandwidth–3 dB BW R L = 50 Ω,C L = 5 pF;see Figure21 93 MHz Totalharmonic R L = 600 Ω,C L = 15pF,VNO = 1VRMS ,THD 0.004 %distortion f= 20 kHz;see Figure22 NC, NO C NC(OFF) , f= 1 MHz; see Figure15 14 pFOFF capacitance C NO(OFF) C COM(ON) ,COM, NC, NO C NC(ON) , f= 1 MHz; see Figure15 60 pFON capacitance C NO(ON) Supply Positivesupplycurrent I+ 0.03 1 μA (1) Ensuredby design,notsubjecttoproductiontest. Copyright© 2009–2011,Texas InstrumentsIncorporated 3

SCDS248B –OCTOBER 2009–REVISED APRIL 2011 www.ti.com V+ = 12 V ± 10%, V– = 0 V,GND = 0 V,TA = –40°C to85°C (unlessotherwisenoted) TA = 25°C TA = –40°C to85°C PARAMETER SYMBOL TEST CONDITIONS UNIT MIN TYP MAX MIN TYP MAX Analog Switch Analogsignalrange 0 V+ V VNC =0 V to10.8V orVNO = 0 V to ON-stateresistance ron 10.8V, 5 5 8 Ω ICOM = –10 mA, see Figure12 ON-stateresistance VNC = 0 V to10.8V orVNO = 0 V to match between Δron 10.8V, 1.6 2.4 2.6 Ω channels ICOM = –10 mA Leakage Currents VNC = 0 V to10.8V orVNO = 0 V to INC(OFF) , 10.8V,OFF leakagecurrent ±0.5 ±10 ±50 nAINO(OFF) VCOM = 0 V to10.8V;see Figure13 VNC = 0 V to10.8VorVNO = 0 V toINC(ON) ,ON leakagecurrent 10.8V, ±0.5 ±10 ±50 nAINO(ON) VCOM = open;see Figure14 DigitalInputs High-levelinputvoltage VINH 5 V+ V Low-levelinputvoltage VINL 0 0.8 V Inputcurrent IINL,IINH VIN = VINL orVINH ±0.005 ±0.1 μA Digitalinputcapacitance C IN 2.7 pF

4 Copyright© 2009–2011,Texas InstrumentsIncorporated

www.ti.com SCDS248B –OCTOBER 2009–REVISED APRIL 2011 12-V SingleSupply (continued) V+ = 12 V ± 10%, V– = 0 V,GND = 0 V,TA = –40°C to85°C (unlessotherwisenoted) TA = 25°C TA = –40°C to85°C PARAMETER SYMBOL TEST CONDITIONS UNIT MIN TYP MAX MIN TYP MAX Dynamic (1) R L = 300 Ω,C L = 35 pF,Turn-ON time tON 56 85 110 nsVCOM = 3.3V;see Figure16 R L = 300 Ω,C L = 35 pF,Turn-OFF time tOFF 25 30 31 nsVCOM = 3.3V;see Figure16 Break-before-make R L = 300 Ω,C L = 35 pF,tBBM 30 19 nstimedelay VNC = VNO = 3.3V;see Figure17 R GEN = VNC = VNO = 0 V,R GEN = 0 Charge injection Q C Ω,C L = 1 nF; 491 pC see Figure18 R L = 50 Ω,C L = 5 pF,f= 1 MHz,OFF isolation O ISO –70 dBsee Figure19 Channel-to-channel R L = 50 Ω,C L = 5 pF,f= 1 MHz,XTALK –70 dBcrosstalk see Figure20 R L = 50 Ω,C L = 5 pF,seeBandwidth–3 dB BW 122 MHzFigure21 R L = 600 Ω,C L = 15pF,VNO =Totalharmonicdistortion THD 0.04 %1VRMS ,f= 20 kHz;see Figure22 NC, NO C NC(OFF) , f= 1 MHz, see Figure15 14 pFOFF capacitance CINO(OFF) C COM(ON) ,COM, NC, NO C NC(ON) , f= 1 MHz, see Figure15 55 pFON capacitance C NO(ON) Supply Positivesupplycurrent I+ 0.07 1 μA (1) Ensuredby design,notsubjecttoproductiontest. Copyright© 2009–2011,Texas InstrumentsIncorporated 5

SCDS248B –OCTOBER 2009–REVISED APRIL 2011 www.ti.com V+ = 5 V ± 10%, V– = 0 V,GND = 0 V,TA = –40°C to85°C (unlessotherwisenoted) TA = 25°C TA = –40°C to85°C PARAMETER SYMBOL TEST CONDITIONS UNIT MIN TYP MAX MIN TYP MAX Analog Switch Analogsignalrange 0 V+ V VNC =0 V to4.5V orVNO = 0 V to 4.5V,ON-stateresistance ron 8 10 12.5 ΩICOM = –10 mA; see Figure12 ON-stateresistance VNC =0 V to4.5V orVNO = 0 V to match between Δron 4.5V, 1 1.1 1.5 Ω channels ICOM = –10 mA VNC =0 V to4.5V orVNO = 0 V toON-stateresistance ron(flat) 4.5V, 1.3 1.3 2 Ωflatness ICOM = –10 mA Leakage Currents VNC =0 V to4.5V orVNO = 0 V toINC(OFF) ,OFF leakagecurrent 4.5V, ±0.5 ±1 ±50 nAINO(OFF) VCOM = 0 V to4.5V;see Figure13 VNC = 0 V to4.5VorVNO = 0 V toINC(ON) ,ON leakagecurrent 4.5V, ±0.5 ±1 ±50 nAINO(ON) VCOM = open;see Figure14 DigitalInputs High-levelinputvoltage VINH 2.4 V+ V Low-levelinputvoltage VINL 0 0.8 V Inputcurrent IINL,IINH VIN = VINL orVINH 0.01 ±0.1 μA Digitalinputcapacitance C IN 2.8 pF

6 Copyright© 2009–2011,Texas InstrumentsIncorporated

www.ti.com SCDS248B –OCTOBER 2009–REVISED APRIL 2011 5-V SingleSupply (continued) V+ = 5 V ± 10%, V– = 0 V,GND = 0 V,TA = –40°C to85°C (unlessotherwisenoted) TA = 25°C TA = –40°C to85°C PARAMETER SYMBOL TEST CONDITIONS UNIT MIN TYP MAX MIN TYP MAX Dynamic (1) R L = 300 Ω,C L = 35 pF,Turn-ON time tON 119 145 178 nsVCOM = 3.3V;see Figure16 R L = 300 Ω,C L = 35 pF,Turn-OFF time tOFF 38 47 95.2 nsVCOM = 3.3V;see Figure16 Break-before-make R L = 300 Ω,C L = 35 pF,tBBM 79 44 nstimedelay VNC = VNO = 3.3V;see Figure17 VGEN = VNC = VNO = 0 V,R GEN = 0 Charge injection Q C Ω,C L = 1 nF; 65 pC see Figure18 R L = 50 Ω,C L = 5 pF,f= 1 MHz,OFF isolation O ISO –70 dBsee Figure19 Channel-to-channel R L = 50 Ω,C L = 5 pF,f= 1 MHz,XTALK –70 dBcrosstalk see Figure20 Bandwidth–3 dB BW R L = 50 Ω,see Figure21 152 MHz R L = 600 Ω,C L = 15 pF,VNO = 1Totalharmonicdistortion THD 0.04 %VRMS, f= 20 kHz;see Figure22 NC, NO C NC(OFF) , f= 1 MHz, see Figure15 15 pFOFF capacitance C NO(OFF) C COM(ON) ,COM, NC, NO C NC(ON) , f= 1 MHz, see Figure15 55 pFON capacitance INO(ON) Power Requirements V+ supplycurrent I+ VIN = 0 V orV+ 0.02 1 μA (1) Ensuredby design,notsubjecttoproductiontest. PIN CONFIGURATIONS AND FUNCTION DESCRIPTIONS Pin FunctionDescriptions TERMINAL

DESCRIPTION

NAME NO. 1 COM Common terminal.Can be an inputoroutput. 2 NC Normallyclosed.Can be an inputoroutput.

3 GND Ground (0V) reference

4 V+ Most positivepower supply

5 N.C. No connect.Not internallyconnected.

6 IN Logiccontrolinput

Most negativepower supply.Thispinisonlyused indual-supplyapplicationsand shouldbe tiedtogroundin7 V– single-supplyapplications. 8 NO Normallyopen.Can be an inputoroutput. Copyright© 2009–2011,Texas InstrumentsIncorporated 7

-0.40 -0.35 -0.30 -0.25 -0.20 -0.15 -0.10 -0.05 0.00 0.05 0.10 Switch I/O Voltage (V) ON-leakage Current (nA) 25C/3V 25C/5V 25C/6V 0.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 -6 -5 -4 -3 -2 -1 0 1 2 3 4 5 6 VIO(V) rON (Ohms) V+=3V, V-=-3.0V V+=5V, V-=-5V V+=6V,V-=-6V -0.35 -0.30 -0.25 -0.20 -0.15 -0.10 -0.05 0.00 0.05 Switch I/O Voltage (V) OFF-leakage Current (nA) 25C/3V 25C/5V 25C/6V 0.00 0.50 1.00 1.50 2.00 2.50 3.00 -40.00 25.00 85.00 Temperature (degrees C) Positive Supply Current (nA) V+=3V, V-=-3V V+=5V, V-=-5V V+=6V, V-=-6V -1.0 0.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 Control Input Voltage (V) VOUT (V) V+=3V,V-=-3V V+=5V,V-=-5V V+=6V,V-=-6V -3.00 -2.50 -2.00 -1.50 -1.00 -0.50 0.00 -40.00 25.00 85.00 Temperature (Degrees C) Negative Supply Current (nA) V+=3V, V-=-3V V+=5V, V-=-5V V+=6V, V-=-6V TS12A12511 SCDS248B –OCTOBER 2009–REVISED APRIL 2011 www.ti.com TYPICAL PERFORMANCE CHARACTERISTICS Figure1.rON vs VIO Figure2.Leakage Currentvs I/Ovoltage(SwitchON) Figure3.Leakage Currentvs I/OVoltage(SwitchOFF) Figure4.PositiveSupply Currentvs Temperature Figure5.NegativeSupply Currentvs Temperature Figure6.ControlInput(IN)ThresholdVoltage

8 Copyright© 2009–2011,Texas InstrumentsIncorporated

-18.0 -16.0 -14.0 -12.0 -10.0 -8.0 -6.0 -4.0 -2.0 0.0 1.00E+6 10.00E+6 100.00E+6 1.00E+9 Frequency (Hz) Magnitude (dB) -75.00 -65.00 -55.00 -45.00 -35.00 -25.00 -15.00 -5.00 1.00E+6 10.00E+6 100.00E+6 1.00E+9 Frequency (Hz) Magnitude (dB) -75.0 -65.0 -55.0 -45.0 -35.0 -25.0 -15.0 -5.0 1.00E+6 10.00E+6 100.00E+6 1.00E+9 Frequency (Hz) Magnitude (dB) 0.000 0.005 0.010 0.015 0.020 0.025 0.030 0.035 0.040 0.045 0.050 10 100 1000 10000 100000 Frequency THD 12V_0V/NC-COM 12V_0V/NO-COM 5V_0V/NC-COM 5V_0V/NO-COM 5V_5V/NC-COM 5V_5V/NO-COM TS12A12511 www.ti.com SCDS248B –OCTOBER 2009–REVISED APRIL 2011 TYPICAL PERFORMANCE CHARACTERISTICS (continued) Figure7.Bandwidth Dual Supply (±5V) Figure8.OffIsolationvs Frequency Dual Supply (±5v) Figure9.Crosstalkvs Frequency Dual Supply (±5V) Figure10.THD+N (%) vs Frequency Copyright© 2009–2011,Texas InstrumentsIncorporated 9

-500 -400 -300 -200 -100 100 200 300 400 500 600 Bias Voltage Charge Injection (pC) TS12A12511 SCDS248B –OCTOBER 2009–REVISED APRIL 2011 www.ti.com TYPICAL PERFORMANCE CHARACTERISTICS (continued) Figure11.Charge Injectionvs Bias Voltage

10 Copyright© 2009–2011,Texas InstrumentsIncorporated

VI = VIH or VIL VNO IN Channel OFF OFF-State Leakage Current VI = VIH or VIL GND NO VI COM V COM VNO IN Channel ON ON-State Leakage Current VI = VIH or VIL GND NO VI COM VCOM VNO IN TS12A12511 www.ti.com SCDS248B –OCTOBER 2009–REVISED APRIL 2011 TEST CIRCUITS Figure12.ON-StateResistance Figure13.OFF-StateLeakage Current(ICOM(OFF) ,INC(OFF) ) Figure14.ON-StateLeakage Current(ICOM(ON) ,INC(ON) ) Copyright© 2009–2011,Texas InstrumentsIncorporated 11

VI = VIO or GND VBIAS = V+, VIO, or GND and Capacitance is measured at NO, COM, and IN inputs during ON and OFF conditions. Capacitance Meter VNO COM NO COM CL(2) RL VCOM GND NO IN VNO VI COM Logic Input(1) VCOM 50 Ω RL CL 35 pFtON TEST V+50 Ω 35 pFtOFF 50% tON tOFF 50% 90% 90% Logic Input (VI) VIO Switch Output (VNO) (1) All input pulses are supplied by generators having the following characteristics: PRR≤ 10 MHz, ZO = 50 Ω , tr /c605 ns, tf /c605 ns. (2) CL includes probe and jig capacitance. TS12A12511 SCDS248B –OCTOBER 2009–REVISED APRIL 2011 www.ti.com Figure15.Capacitance(CCOM(OFF) ,C COM(ON) ,C NC(OFF) ,C NC(ON) ) Figure16.Turn-ON (tON )and Turn-OFF Time (tOFF )

12 Copyright© 2009–2011,Texas InstrumentsIncorporated

CL(2) RL tBBM 50% 90% 90% VNC or VNO = V+/2 RL = 50 Ω CL = 35 pF Logic Input(1) Logic Input (VI) Switch Output (VCOM) VIO IN (1) All input pulses are supplied by generators having the following characteristics: PRR≤ 10 MHz, ZO = 50 Ω , tr /c605 ns, tf /c605 ns. (2) CL includes probe and jig capacitance. GND NO IN RGEN VI COM V COM CL(1) OFF VCOM ON OFF ∆ VCOMVGEN VI = VIH or VIL CL = 1 nF VGEN = 0 to V+ RGEN = 0 QC = CL × ∆ VCOM Logic Input(2) VIH VIL Logic Input (VI) (1) CL includes probe and jig capacitance. (2) All input pulses are supplied by generators having the following characteristics: PRR≤ 10 MHz, ZO = 50 Ω , tr /c605 ns, tf /c605 ns. NO COM VNO VCOM Channel OFF: NO to COM Network Analyzer Setup Source Power = 0 dBm (632-mV P-P at 50-/c87load) DC Bias = 350 mV 50 /c87 GND 50 /c87 50 /c87 Network Analyzer Source Signal INVI VI = VIO or GND TS12A12511 www.ti.com SCDS248B –OCTOBER 2009–REVISED APRIL 2011 Figure17.Break-Before-MakeTime Delay (tBBM ) Figure18.Charge Injection(QC ) Figure19.OFF Isolation(OISO) Copyright© 2009–2011,Texas InstrumentsIncorporated 13

COM1 Channel ON: NO to COM Network Analyzer Setup Source Power = 0 dBm (632 mV P-P at 50 /c87load) DC Bias = 350 mV 50 /c87 GND VNO2 Source Signal Network Analyzer COM2 INVI GND NO INVI COM 50 /c87 50 /c87 VNO VCOM Channel ON: NO to COM Network Analyzer Setup Source Power = 0 dBm (632-mV P-P at 50-/c87load) DC Bias = 350 mV Network Analyzer Source Signal VI = VIH or VIL NO COM CL(1) V+/2 INVI 600 600 Audio Analyzer Source Signal RL = 600 Ω CL = 50 pFVSOURCE = V+ P-P f SOURCE = 20 Hz to 20 kHz Channel ON: COM to NO VI = (VIO – V +/2) or -V +/2 -V +/2 (1) CL includes probe and jig capacitance. TS12A12511 SCDS248B –OCTOBER 2009–REVISED APRIL 2011 www.ti.com Figure20.Channel-to-ChannelCrosstalk(XTALK ) Figure21.Bandwidth (BW) Figure22.TotalHarmonic Distortion

www.ti.com SCDS248B –OCTOBER 2009–REVISED APRIL 2011

REVISION HISTORY

*All dimensions are nominal Device Package Type Package Drawing Pins SPQ Reel Diameter (mm) Reel Width W1 (mm) (mm) (mm) (mm) (mm) W (mm) Pin1 Quadrant PACKAGE MATERIALS INFORMATION www.ti.com 16-Aug-2012 Pack Materials-Page 1

*All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TS12A12511DCNR SOT-23 DCN 8 3000 202.0 201.0 28.0 TS12A12511DGKR VSSOP DGK 8 2500 358.0 335.0 35.0 TS12A12511DRJR SON DRJ 8 1000 210.0 185.0 35.0 PACKAGE MATERIALS INFORMATION www.ti.com 16-Aug-2012 Pack Materials-Page 2

Texas InstrumentsIncorporatedand itssubsidiaries(TI)reservetherighttomake corrections,enhancements,improvementsand other changes toitssemiconductorproductsand servicesperJESD46C and todiscontinueany productorserviceperJESD48B. Buyersshould obtainthelatestrelevantinformationbeforeplacingordersand shouldverifythatsuch informationiscurrentand complete.All semiconductorproducts(alsoreferredtohereinas “components”)aresoldsubjecttoTI’s termsand conditionsofsalesuppliedatthetime oforderacknowledgment. TIwarrantsperformanceofitscomponents tothespecificationsapplicableatthetimeofsale,inaccordancewiththewarrantyinTI’s terms and conditionsofsaleofsemiconductorproducts.Testingand otherqualitycontroltechniquesareused totheextentTIdeems necessary tosupportthiswarranty.Exceptwhere mandated by applicablelaw,testingofallparametersofeach component isnotnecessarily performed. TIassumes no liabilityforapplicationsassistanceorthedesignofBuyers’products.Buyersareresponsiblefortheirproductsand applicationsusingTIcomponents.To minimizetherisksassociatedwithBuyers’productsand applications,Buyersshouldprovide adequatedesignand operatingsafeguards. TIdoes notwarrantorrepresentthatany license,eitherexpressorimplied,isgrantedunderany patentright,copyright,mask work right,or otherintellectualpropertyrightrelatingtoany combination,machine,orprocessinwhichTIcomponents orservicesareused.Information publishedby TIregardingthird-partyproductsorservicesdoes notconstitutea licensetouse such productsorservicesora warrantyor endorsementthereof.Use ofsuch informationmay requirea licensefroma thirdpartyunderthepatentsorotherintellectualpropertyofthe thirdparty,ora licensefromTIunderthepatentsorotherintellectualpropertyofTI. ReproductionofsignificantportionsofTIinformationinTIdatabooks ordatasheetsispermissibleonlyifreproductioniswithoutalteration and isaccompaniedby allassociatedwarranties,conditions,limitations,and notices.TIisnotresponsibleorliableforsuch altered documentation.Informationofthirdpartiesmay be subjecttoadditionalrestrictions. ResaleofTIcomponents orserviceswithstatementsdifferentfromorbeyond theparametersstatedby TIforthatcomponent orservice voidsallexpressand any impliedwarrantiesfortheassociatedTIcomponent orserviceand isan unfairand deceptivebusinesspractice. TIisnotresponsibleorliableforany such statements. Buyeracknowledgesand agreesthatitissolelyresponsibleforcompliancewithalllegal,regulatoryand safety-relatedrequirements concerningitsproducts,and any use ofTIcomponents initsapplications,notwithstandingany applications-relatedinformationorsupport thatmay be providedby TI.Buyerrepresentsand agreesthatithas allthenecessaryexpertisetocreateand implementsafeguardswhich anticipatedangerousconsequencesoffailures,monitorfailuresand theirconsequences,lessenthelikelihoodoffailuresthatmightcause harm and takeappropriateremedialactions.BuyerwillfullyindemnifyTIand itsrepresentativesagainstany damages arisingoutoftheuse ofany TIcomponents insafety-criticalapplications. Insome cases,TIcomponents may be promotedspecificallytofacilitatesafety-relatedapplications.Withsuch components,TI’s goalisto helpenablecustomerstodesignand createtheirown end-productsolutionsthatmeet applicablefunctionalsafetystandardsand requirements.Nonetheless,such components aresubjecttotheseterms. No TIcomponents areauthorizedforuse inFDA ClassIII(orsimilarlife-criticalmedicalequipment)unlessauthorizedofficersoftheparties have executeda specialagreementspecificallygoverningsuch use. OnlythoseTIcomponents whichTIhas specificallydesignatedas militarygradeor“enhanced plastic”aredesignedand intendedforuse in military/aerospaceapplicationsorenvironments.Buyeracknowledgesand agreesthatany militaryoraerospaceuse ofTIcomponents whichhave not been so designatedissolelyattheBuyer's risk,and thatBuyerissolelyresponsibleforcompliancewithalllegaland regulatoryrequirementsinconnectionwithsuch use. TIhas specificallydesignatedcertaincomponents whichmeet ISO/TS16949 requirements,mainlyforautomotiveuse.Components which have notbeen so designatedareneitherdesignednorintendedforautomotiveuse;and TIwillnotbe responsibleforany failureofsuch components tomeet such requirements. Products Applications Audio www.ti.com/audio Automotiveand Transportationwww.ti.com/automotive Amplifiers amplifier.ti.com Communicationsand Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP ® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energyand Lighting www.ti.com/energy Clocksand Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space,Avionicsand Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Videoand Imaging www.ti.com/video RFID www.ti-rfid.com OMAP MobileProcessors www.ti.com/omap TIE2E Community e2e.ti.com WirelessConnectivity www.ti.com/wirelessconnectivity MailingAddress:Texas Instruments,PostOfficeBox 655303,Dallas,Texas 75265 Copyright© 2012,Texas InstrumentsIncorporated

Click to View Pricing, Inventory, Delivery & Lifecycle Information: Texas Instruments: TS12A12511DCNR TS12A12511DGKR TS12A12511DRJR

Product Information

TS12A12511DGKR specifications and overview.

Summary

짹6 V/+12 V, 5 廓, LOW rON SINGLE SPDT ANALOG SWITCH

Description