TS700 PENNELCOM | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 10
Technical content
Electric TV Lift, TS700A & TS1000A INSTALLATION INSTRUCTIONS CONTENT: 1. Important safety instructions. 2. Specifications and main measures. 3. Parts included. 4. Installation. 5. Adjusting the stroke length of the lift. 6. Declaration of conformity. WARNING WARNING: FAILURE TO COMPLY WITH OR OBSERVE ALL ASSEMBLY, SAFETY AND OPERATION INSTRUCTIONS AND WARNINGS REGARDING THE USE OF THIS PROD- UCT MAY RESULT IN SERIOUS BODILY INJURY. No. #324360.0 Load: Min. 5 kg Max. 100 kg TS1000A TS700A No. #324360.0 Electric TV Lift: TS700 & TS1000 65 kg
Electric TV Lift, TS700A & TS1000A 1. Important safety Instructions. Use the following safety guidelines to help protect your lift from potential damage and to en- sure your own personal safety.
- Read all the installation instructions before testing or installing your lift.
- Read and follow all safety instructions.
- Keep remote control out of reach of children.
- To prevent bodily injury keep hands and clothing away from the lift while the lift is in operation.
- Before installing the lift or working with its connections, unplug the lift from the electri- cal shock.
- Do not install the lift, power supply or R.F. module in places subject to extreme tem- peratures for example near a radiator, or heating vent.
- The TV lift must only be mounted in a dry area and it must ensured before use that the lift is safe or protected from liquid contact or spillage.
- To avoid damaging the power supply, R.F. module and power cord, do not put any- thing on it or place it where it could become damaged.
- Unplug the lift in the following conditions: When the power cord or plug is damaged or frayed. If liquid has spilled into the lift, power supply or RF module. If the lift, power supply or RF module has been exposed to rain or wa- ter. If the lift exhibits a distinct change in performance, indicating a need for servicing.
- MANUFACTURES who build this Flat Lift into other products or use it with other products, MUST make sure to prevent bodily injury. The MANUFACTURER is re- sponsible to give the end user proper warnings and instructions for use. CAUTION: Before you begin any of the Installation procedures (4. Installation.), read and follow the warnings and safety instructions on this page. WARNING ! THIS IS NOT A TOY ! WARNING ! CHILDREN SHOULD NOT OPERATE LIFT OR REMOTE CONTROL ! Electric TV Lift: TS700 & TS1000Electric TV Lift: TS700 & TS1000
Electric TV Lift, TS700A & TS1000A 2. Specifications and main measures. Materials and weights: Steel, black powder coated - Weight ~ 17/23 kg Min. Load on TV lift: 5 kg Max. Load on TV lift: 100 kg Operation: Remote & Rocker switch Voltage: Consumption: 110-240 VAC / 50-60Hz 100 Watt max. by 80 kg Main measures, TS700A [mm]: VESA, TS700A: 400x400, 400x200, 400x100 300x300 200x200, 200x100 100x100 Electric TV Lift: TS700 & TS1000 65 kg TS700 Mounting hole patterns
Electric TV Lift, TS700A & TS1000A Main measures, TS1000A [mm]: VESA, TS1000A: 600x400, 600x200, 600x100 400x400, 400x200, 400x100 300x300 200x200, 200x100 Electric TV Lift: TS700 & TS1000 TS1000 Mounting hole patterns
Electric TV Lift, TS700A & TS1000A 3. Parts included. Lift unit ( #1 ) Lid lifter ( #2 ) Lift brackets ( #3 ) TV mounting brackets ( #4 ) (TS1000A only) R.F. Module ( #5 ) Remote control ( #6 ) AC input wire, country configured ( #7 ) Power supply bracket ( #8 ) Rocker switch ( #9 ) Power supply ( #10 ) Lift unit ( #1 ) Lid lifter ( #2 ) Lift brackets ( #3 ) TV mounting brackets ( #4 ) (TS1000A only) R.F. Module ( #5 ) Remote con- trol ( #6 ) AC input wire, coun- try configured ( #7 ) Power supply bracket (# 8) Power supply ( #10 ) Rocker switch ( #9 ) Electric TV Lift: TS700 & TS1000
Electric TV Lift, TS700A & TS1000A 4. Installation. 1) Remove all contents from packaging and compare with parts list. 2) Place the lift unit (#1) on e.g. the back panel of cabinet in a location that will allow full up and down movement of the lift. 3) Fasten the unit securely to the cabinet. Screws must be appropriate for the material being used. 4) Connect the plugs from lift unit (#1) and power supply (#10) to R.F. Module (#5). Please also refer to the separate user instruction for the remote unit, next page. 5) Mount rocker switch (#9) on wanted location by cutting a hole and pressing the switch into place. Secure excess wire to keep away from moving parts. 6) Plug the power cord into wall outlet and test the lift. If the unit doesn’t work, check all connections and retry. Helpful hint: Mount TV lift and electronics to plywood panel and attach to inside back of cabinet using appropriate number of screws. This allows all components to be removed from the cabinet if necessary. If this is not possible, create an access panel to the electronics. Electric TV Lift: TS700 & TS1000
Electric TV Lift, TS700A & TS1000A User instruction, RF remote system Installation o connect the power supply and the motor unit to the remote receiver. 2 different plug sizes make this connection only possible to make in the right way o after having connected the plugs, the blue light will be lightning o push the emitter buttons and the motor unit will move up and down o for stopping the motion one of the buttons need to be pushed Learning o if the remote receiver do not respond when pushing the emitter buttons, reset the re- ceiver. After that, code the emitter and receiver together again Coding o push the learner button on the receiver for less than 1 sec. o push one of the emitter buttons o the red light will start flashing o push one of the emitter buttons again and the red light will turn off o the units now are coded together with a unique code Reset o push and hold down the learner button on the receiver for 10 sec. (will be reset when the red light turns off). Electric TV Lift: TS700 & TS1000
Electric TV Lift, TS700A & TS1000A External rocker switch o the external rocker switch can be connected to the receiver, if a fixed operation unit is required. Trouble shooting o check the plug connections o check whether the blue light is on o reset the receiver and make a new coding Change of battery in emitter (type 27A/12V) o remove lid on back side o lift up battery o place new battery FCC Statement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions; 1) This device may not cause any harmful interference and 2) This device must accept any interference received, including interference that may cause undesired operation. Electric TV Lift: TS700 & TS1000
Electric TV Lift, TS700A & TS1000A 5. Adjusting the stroke length of the lift. Adjusting the bottom stop: The bottom stop can be adjusted to any preferred height, e.g. if you don’t want the lift to go all the way down into the cabinet. 1. Remove the 2 covers. 2. Use an allen key to loosen the screw of the wire glider. Move the glider to the preferred position and tighten the screw securely again. 3. Mount the 2 covers again Electric TV Lift: TS700 & TS1000
Electric TV Lift, TS700A & TS1000A Adjusting the top stop: The top stop can be adjusted to any preferred height, e.g. if you don’t want the lift to go all the way out of the cabinet. Use an allen key to loosen the screw of the wire glider. Move the glider to the preferred position and tighten the screw securely again. Electric TV Lift: TS700 & TS1000