TRV5 TIANBO | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
it " Ti3O A828 TRVS ay = Features © Open or sealed cover available © 40A continuous rating 80°C © Conform to ROHS,ELV directive = Ordering Code TRVS L — H — F / 12vDC 1 2 3 4 5 1. Relay Model 2. Coil Power: 1.44W 3. Contact Form: H: Form A 4. F: with Bracket, Nil: without Bracket 5. Coil Nominal Voltage: 6, 12, 24VDC = Coil Data (at 20°C) Nominal Voltage(VDC) 6 12 24 ColResitnewosiox) | as | aco | a Rated Current(mA) 120 60 1.44W Max Operate Voltage(VDC) 78 15.6 Min Release Voltage(VDC) 03 06 1.2 Max Applicable Voltage 130% of nominal voltage at 70°C, 170% of nominal voltage at 23°C = Contact Data Contact Form 4H Contact Material Silver Alloy Load Resistive Load(COS@=1) 30A 14VDG Contact Ratings 15A 28VDC ‘Max Switching Voltage 28VDC Max Switching Current 30A Max Switching Power ‘420W Contact Resistance 400maMax at 6VDC 1A Life E: Electrical: 100,000 Operations (at 30 Operations/minute) ssl) Mechanical: 10,000,000 Operations (at 300 Operations/minute)
= Characteristics Data Insulation Resistance 100MQMin at 500VDC Dielectric Strength Between Open Contacts S00VAC (for one minute) Between Contacts and Coil SOOVAG (for one minute) Operate Time 15ms Release Time ms Temperature Range -40°C to +85°C Operating Extremes: 106 ‘Shock Resistance Damage Limits: 1006 Vibration Resistance 10-55Hz, 1.5mm : Mechanical: 18,000 operations/hr Max. Switching Frequency Electrical: 1,800 operations/hr Humidity 45-85% Weight Approx: 28g @ Engineering Data Amblent Temperature Contact Switching Capacity $ 190 5 100 ® 120 SQ 5 100 Z x0 7: S Sol | oN @ SASS 3 2 2 | SANS Ses 3 < i 8 10 € oo SENN OG 2p NN Os =z 40 Bel] = “9095100 110 120 190 140 150 3 5 10 20 30 50 100 Coil Voltage(%) Contact Voltage(V)
= Overall and Mounting Dimensions 8204 0 2 je _ 8 12 ey ~- 408 ; i Ged my | ets sie ; g fetes aS § UTE] g * | TE 3 gel 2 He 3 i oz ht F it [ i a. o Lae in PCB Layout Wiring Diagram Remark: 1). In case the tolerance is not shown in outline dimension, the tolerance should be +0.2mm for outline dimensionsmm; 0.3mm for outline dimension: 1~Smm and 40.4mm for outline dimension>Smm. 2). The tolerance without indication is always +0.1mm for the dimension of PCB layout. Disclaimer: ‘These specifications are just for customers’ reference and subject to change without notice.