TRSL-8110G OPTOWAY | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 TRSL-8110G / TRSL-8110BG / TRSL-8110AG (RoHS Compliant) 3.3V / 1310 nm / 4.25 Gbps SFF LC SINGLE-MODE TRANSCEIVER

FEATURES

l Up to 4.25 Gb/s Bi-directional Data Links l Duplex LC Single Mode Transceiver l Fibre Channel FC-PI 400/200/100-SM-LC-L Compliant l IEEE 802.3z 1000BASE-LX Compliant l Small Form Factor, RJ-45 size, 2×5 pin Package l 1310 nm DFB LD Transmitter l Up to 10km at 4.25Gb/s l AC/AC Coupled Signal Input / Output l LVTTL Transmitter Disable Input l LVTTL Signal Detect Output l Single +3.3 V Power Supply l RoHS Compliant l 0 to 70oC Operation: TRSL-8110G l -10 to 85oC Operation: TRSL-8110BG l -40 to 85oC Operation: TRSL-8110AG l Wave Solderable and Aqueous Washable l Class 1 Laser International Safety Standard IEC-60825 Compliant

APPLICATIONS

l Tri-rate 1.063/2.125/4.25 Gb/s Fibre Channel l 1.25 Gb/s 1000 BASE-LX Gigabit Ethernet

DESCRIPTION

The TRSL-8110G series single mode transceivers is small form factor, low power, high performance module for bi-directional serial optical data communications such as 4x/2x/1x Fibre Channel and 1000BASE-LX Gigabit Ethernet. This module is designed for single mode fiber and operates at a nominal wavelength of 1310 nm. The transmitter section uses a multiple quantum well DFB laser and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. A LVPECL logic interface simplifies interface to external circuitry. LASER SAFETY This single mode transceiver is a Class 1 laser product. It complies with IEC-60825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug. ORDER INFORMATION P/No. Bit Rate (Gb/s) FC-PI Distance (km) Wavelengt h (nm) Package Temp. (oC) TX Power (dBm) RX Sens. (dBm) RoHS Compliant TRSL-8110G 4 / 2 / 1 400/200/100 10 1310 DFB 2×5 LC 0 to 70 -3 to -8 -18 Yes TRSL-8110BG 4 / 2 / 1 400/200/100 10 1310 DFB 2×5 LC -10 to 85 -3 to -8 -18 Yes TRSL-8110AG 4 / 2 / 1 400/200/100 10 1310 DFB 2×5 LC -40 to 85 -3 to -8 -18 Yes Absolute Maximum Ratings Parameter Symbol Min Max Units Notes Storage Temperature Tstg -40 85 oC Operating Temperature Topr -10 -40 oC TRSL-8110G TRSL-8110BG TRSL-8110AG Soldering Temperature --- 260 oC 10 seconds on leads only Power Supply Voltage Vcc 0 4.5 V Input Voltage --- GND Vcc V Output Current Iout 0 30 mA Recommended Operating Conditions Parameter Symbol Min Typ Max Units / Notes Power Supply Voltage Vcc 3.13 3.3 3.47 V Operating Temperature Topr -10 -40 oC / TRSL-8110G oC / TRSL-8110BG oC / TRSL-8110AG air flow 1m/sec Data Rate 1 4.25 Gb/s Power Supply Current Icc 200 250 mA

OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 Transmitter Specifications (0oC < Topr < 70oC, 3.13V < Vcc < 3.47V) Parameter Symbol Min Typ Max Units Notes Optical Optical Transmit Power Po -8 --- -3 dBm 1 Optical Modulation Amplitude @4.25 Gb/s OMA 290 µW Output Center Wavelength λ 1260 1310 1360 nm Output Spectrum Width Δλ --- 1 nm -20 dB width Side Mode Suppression Ratio SMSR 30 dB Optical Rise Time tr / tf 90 ps 20% to 80% Values Relative Intensity Noise RIN -118 dB/Hz Electrical Data Input Current – Low IIL -350 µA Data Input Current – High IIH 350 µA Differential Input Voltage VIH - VIL 300 mV Data Input Voltage – Low VIL - VCC -2.0 -1.58 V 2 Data Input Voltage -- High VIH - VCC -1.1 -0.74 V 2 Disable Input Voltage -- Low VTDIS,L 0 0.5 V TX Output Enabled Disable Input Voltage -- High VTDIS,H Vcc – 1.3 Vcc V TX Ouput Disabled Shut Off Time for TxDis tDIS 1 ms 1. Output power is power coupled into a 9/125 µm single mode fiber. 2. These inputs are compatible with 10K, 10KH and 100K ECL and PECL inputs. Receiver Specifications (0oC < Topr < 70oC, 3.13V < Vcc < 3. 47V) Parameter Symbol Min Typ Max Units Notes Optical Sensitivity @ 4.25 Gb/s Sen1 --- --- 29 -18 µW dBm Maximum Input Power Pin 0 --- dBm Signal Detect -- Asserted Pa --- --- -18 dBm Transition: low to high Signal Detect -- Deasserted Pd -31 --- --- dBm Transition: high to low Signal detect -- Hysteresis 1.0 --- dB Wavelength of Operation 1260 --- 1600 nm Electrical Data Output Voltage – Low VOL - VCC -2.0 -1.58 V 5 Data Output Voltage – High VOH - VCC -1.1 -0.74 V 5 Signal Detect Output Voltage -- Low VOL 0.5 V Signal Detect Output Voltage -- High VOH 2.0 V 3. Measured at PRBS 27-1 at BERT 1E-12. 4. Represents sensitivity based on OMA spec, as corrected to incoming Extinction Ratio of 9 dB. For example, an OMA of 29 µW is approximately equal to an average power of -17.3 dBm, average with an Extinction ratio of 9 dB. 5. These outputs are compatible with 10K, 10KH and 100K ECL and PECL outputs.

OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 CONNECTION DIAGRAM PIN Symbol Notes

1 VEERX Directly connect this pin to the receiver ground plane

2 VCC RX +3.3V dc power for the receiver section 3 SD Active high on this indicates a received optical signal. 4 RD− Receiver Dataout Bar. See recommended circuit schematic 5 RD+ Receiver Dataout. See recommended circuit schematic 6 VCC TX +3.3V dc power for the transmitter section

7 VEETX Directly connect this plan to the transmitter ground plane

8 TX_Disable Transmitter Disable. Connect this pin to +3.3V TTL logic “1” to disable module To enable module connect to TTL logic low “0” 9 TD+ Transmitter Data In. See recommended circuit schematic 10 TD- Transmitter Data In Bar. See recommended circuit schematic MS MS Mounting Studs. Connect to Chassis Ground RECOMMENDED CIRCUIT SCHEMATIC LD Driver 1μH 100 Ω TD+ TD- 10nF 10μF RD- RD+ SD VCC 3.3V Z=50Ω Z=50Ω Z=50Ω Z=50Ω POST Amp SerDes IC Protocol IC 100Ω 1μH 10nF 10μF 10nF 10μF TD+ TD- RD- RD- TX_Disable Signal Detect Depending on SerDes VeeTX TX_Disable 4.7K to 10K Ω VccTX VccRX VeeRX 1 SFF Module TOP VIEW 5 4 3 2 1 6 7 8 9 10 MS MS

OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 PACKAGE DIAGRAM (Units in mm) A) Standard Case TRSL-8110G / TRSL-8110BG / TRSL-8110AG B) Extended Case TRSL-8110EG / TRSL-8110BEG / TRSL-8110AEG Note: Specifications subject to change without notice.