TRSL-3130AG OPTOWAY | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 TRSL-3130G / TRSL-3130AG 3.3V / 1310 nm / 155 Mbps RoHS Compliant SFF LC SINGLE-MODE TRANSCEIVER

FEATURES

l Duplex LC Single Mode Transceiver l SONET OC-3 IR-1 / SDH STM-1 (S-1.1) Compliant l Small Form Factor 2X5 pin Package l 1310 nm LD Transmitter l Distance up to 30 km l LVPECL Signal Input / Output l LVTTL Transmitter Disable Input l LVPECL Signal Detect Output l Single +3.3 V Power Supply l RoHS Compliant l 0 to 70oC Operating: TRSL-3130G l -40 to 85oC Operating: TRSL-3130AG l Wave Solderable and Aqueous Washable l Class 1 Laser International Safety Standard IEC-60825 Compliant

APPLICATIONS

l SONET/SDH Equipment Interconnect l Fast Ethernet 100 Mb/s Links

DESCRIPTION

The TRSL-3130G series single mode transceivers is small form factor, low power, high performance module for bi-directional serial optical data communications such as SONET OC-3 IR-1 / SDH STM-1 (S-1.1) and Fast Ethernet. This module is designed for single mode fiber and operates at a nominal wavelength of 1310 nm. The transmitter section uses a multiple quantum well laser and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. A PECL logic interface simplifies interface to external circuitry. LASER SAFETY This single mode transceiver is a Class 1 laser product. It complies with IEC-60825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug ORDER INFORMATION P/No. Bit Rate (Mb/s) SDH /SONET Distance (km) Wavelength (nm) Package Temp. (oC) TX Power (dBm) RX Sens. (dBm) RoHS Compliant TRSL-3130G 125 / 155 IR-1/S-1.1 30 1310 2X5 LC 0 to 70 -8 to -15 -34 Yes TRSL-3130AG 125 / 155 IR-1/S-1.1 30 1310 2X5 LC -40 to 85 -8 to -15 -34 Yes Absolute Maximum Ratings Parameter Symbol Min Max Units Notes Storage Temperature Tstg -40 85 oC Operating Temperature Topr 0 -40 oC TRSL-3130G TRSL-3130AG Soldering Temperature --- 260 oC 10 seconds on leads only Power Supply Voltage Vcc 0 4.5 V Input Voltage --- GND Vcc V Output Current Iout 0 30 mA Recommended Operating Conditions Parameter Symbol Min Typ Max Units / Notes Power Supply Voltage Vcc 3.13 3.3 3.47 V Operating Temperature Topr 0 -40 oC / TRSL-3130G oC / TRSL-3130AG Data Rate 125 / 155 170 Mb/s Power Supply Current Icc 180 240 mA

OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 Transmitter Specifications (0oC < Topr < 70oC, 3.13V < Vcc < 3. 47V) Parameter Symbol Min Typ Max Units Notes Optical Optical Transmit Power Po -15 --- -8 dBm 1 Output Center Wavelength λ 1260 1310 1360 nm Output Spectrum Width Δλ --- --- 7.7 nm RMS (σ) Extinction Ratio ER 8.2 --- --- dB Output Eye Compliant with Bellcore GR-253-CORE and ITU recommendation G.957 Optical Rise Time tr 2 ns 10% to 90% Values Optical Fall Time tf 2 ns 10% to 90% Values Relative Intensity Noise RIN -116 dB/Hz Total Jitter TJ 1 ns 2 Electrical Data Input Current – Low IIL -350 µA Data Input Current – High IIH 350 µA Differential Input Voltage VIH - VIL 300 mV Data Input Voltage – Low VIL - VCC -2.0 -1.58 V 3 Data Input Voltage -- High VIH - VCC -1.1 -0.74 V 3 Disable Input Voltage -- Low VTDIS,L 0 0.5 V TX Output Enabled Disable Input Voltage -- High VTDIS,H Vcc – 1.3 Vcc V TX Ouput Disabled Shut Off Time for TxDis tDIS 1 ms Notes: 1. Output power is power coupled into a 9/125 µm single mode fiber. 2. Measured with a 223-1 PRBS with 72 ones and 72 zeros. 3. These inputs are compatible with 10K, 10KH and 100K ECL and PECL inputs. Receiver Specifications (0oC < Topr < 70oC, 3.13V < Vcc < 3.47V) Parameter Symbol Min Typ Max Units Notes Optical Sensitivity --- --- --- -34 dBm 1 Maximum Input Power Pin -5 --- dBm Signal Detect -- Asserted Pa --- --- -34 dBm Transition: low to high Signal Detect -- Deasserted Pd -47 --- --- dBm Transition: high to low Signal detect -- Hysteresis 1.0 --- dB Wavelength of Operation 1100 --- 1600 nm Electrical Data Output Voltage – Low VOL - VCC -2.0 -1.58 V 2 Data Output Voltage – High VOH - VCC -1.1 -0.74 V 2 Signal Detect Output Voltage -- Low VOL - VCC -2.0 -1.58 V Signal Detect Output Voltage -- High VOH - VCC -1.1 -0.74 V Notes: 1. Minimum sensitivity and saturation levels at BER=1E-10 for a 223-1 PRBS with 72 ones and 72 zeros. 2. These outputs are compatible with 10K, 10KH and 100K ECL and PECL outputs.

OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 CONNECTION DIAGRAM PIN Symbol Notes

1 VEEr Directly connect this pin to the receiver ground plane

2 VCC r +3.3V dc power for the receiver section 3 SD Active high on this indicates a received optical signal. 4 RD− Receiver Dataout Bar. See recommended circuit schematic 5 RD+ Receiver Dataout. See recommended circuit schematic 6 VCC t +3.3V dc power for the transmitter section

7 VEEt Directly connect this plan to the transmitter ground plane

8 TDis Transmitter Disable. Connect this pin to +3.3V TTL logic “1” to disable module To enable module connect to TTL logic low “0” 9 TD+ Transmitter Data In. See recommended circuit schematic 10 TD- Transmitter Data In Bar. See recommended circuit schematic MS MS Mounting Studs. Connect to Chassis Ground RECOMMENDED CIRCUIT SCHEMATIC Veer1 Vccr2 SD3 RD-4 RD+5 Vcct 6Veet 7TDis 8TD+ 9TD- 10 SFF2X5 TDis(LVTTL) 1uH 10uF10nF 10uF10nF Vcc3.3V 1uH 10uF10nF PHY DEVICE TD- TD+ RD+ RD- SD 130R 82R Vcc3.3V 130R 82R Vcc3.3V Vcc3.3V LVPECL Vcc3.3V LVPECL TO LVPECL STAGE 150ohm150ohm MICROSTRIP2 Z=5OR MICROSTRIP1 Z=50R MICROSTRIP4 Z=5OR MICROSTRIP3 Z=50R Note: 1. 1000ΩSD Output pull-down resistor required for TRSL-3130G / TRSL-3130AG (LVPECL SD Output) 2. Veer and Veet are not internally connected to each other. 3. 50 Ω line pattern and component placements on TD+/TD- and RD+/RD- lines shall be symmetrical for better impedance matching.

OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 PACKAGE DIAGRAM Units in mm 1) Standard Case TRSL-3130G / TRSL-3130AG 2) Extended Case TRSL-3130EG / TRSL-3130AEG Note: Specifications subject to change without notice.