TRSI6045F TRANSKO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

Rev 2: 10 -28 -2019 TRSI6045F SERIES Resin Shielded Inductor SMD (6.0 X 6.0 X 4.5mm)

  • Resin Shielded construction
  • Low DC Resistance
  • Halogen Free RoHS compliant

FEATURES

  • Low Profile SPECIFICATION DC Resistance Rated DC Current (A) Typ. Part No. Inductance (µH) Tolerance (mΩ ±30%) TRSI6045F -1R0N 1.0 30% 12 12.2 6.50 TRSI6045F -1R8N 1.5 30% 17 9.60 5.60 TRSI6045F -2R2N 2.2 30% 19 8.80 5.00 TRSI6045F -3R3N 3.3 30% 24 7.50 4.30 TRSI6045F -4R7M 4.7 20% 31 6.70 3.90 TRSI6045F -5R1M 5.1 20% 33 6.00 3.50 TRSI6045F -6R8M 6.8 20% 43 5.30 3.20 TRSI6045F -8R2M 8.2 20% 50 4.60 2.70 TRSI6045F -100M 10 20% 57 4.50 2.70 TRSI6045F -150M 15 20% 80 3.40 2.20 TRSI6045F -220M 22 20% 125 3.00 1.90 TRSI6045F -270M 27 20% 160 2.50 1.40 TRSI6045F -330M 33 20% 180 2.30 1.30 TRSI6045F -470M 47 20% 245 1.90 1.20 TRSI6045F -680M 68 20% 330 1.60 1.00 TRSI6045F -101M 100 20% 600 1.30 0.80 TRSI6045F -331M 330 20% 1800 0.70 0.35 TRSI6045F -102M 1000 20% 6000 0.40 0.22
  • Measurement frequency of Inductance value : at 100KHz, 0.25V
  • Test equipment: CH1062A / CH1320 SOLDER PATTERN SCHEMATIC A B C G H I DIMENSION

Rev 2: 10 -28 -2019 TRSI6045F SERIES REEL DIMENSIONS (1000 pcs per reel) W 330 ±1.0 D 22.4 ±0.2 C 13.5 ±0.2 T1 16.5 ±0.5 N 100 ±0.5 T2 21.10 ±0.5 E 2.50 ±0.2 W1 I F P0 G P1 C t0 D H

Rev 2: 10 -28 -2019 TRSI6045F SERIES 1.Operating temperature range -40 TO + 125°C (Includes temperature when the coil is heated) 2. External appearance On visual inspection, the coil has no external defects. 3. Terminal strength After soldering. Between copper plate and terminals of coil. Push in two directions of X.Y withstanding at below conditions. Terminal should not peel off. (refer to figure at right) 5.0N 60 sec. 4. Insulating resistance Over 100MΩ at 100V D.C. between coil and core. 5. Dielectric strength No dielectric breakdown at 100V D.C. for 1 minute between coil and core. 6. Temperature characteristics Inductance coefficient (0~2,000)x10 -6 /°C ( -25~+80°C) 7. Humidity characteristics (Moisture Resistance) Inductance deviation within ±5%, after 96 hours in 90~95% relative humidity at 40 ±2°C and 1 hour drying under normal condition. 8. Vibration resistance Inductance deviation within ±5%, after vibration for 1 hour. In each of three orientations at sweep vibration (10~55~10 Hz) with 1.5mm P -P amplitudes. 9. Shock resistance Inductance deviation within ±5%, after being dropped once with 981m/s 2 (100G) shock attitude upon a rubber block method shock testing machine, in three different orientations. 10. Resistance to Soldering Heat: 260°C, 10 seconds (See recommend reflow) 11. Storage environment Temperature: 0°C~35°C; -40°~125°C after mounting Humidity Range: 50% ~ 70% RH 12. Use components within 12 months. If 12 months or more have elapsed, check solderability before use. RELIABILITY TEST Transko Electronics, Inc reserves the right to make changes to the product (s), service (s), and specification (s) described herein without notice. See “Terms of Sale” for details on our website. LEAD -FREE HEAT ENDURANCE TEST LEAD -FREE RECOMMENDED REFLOW