TRSF3232E TI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 17
Technical content
www.ti.com
FEATURES
D, DB, DW, OR PW PACKAGE (TOP VIEW) C1+ C1− C2+ C2− DOUT2 RIN2 VCC GND DOUT1 RIN1 ROUT1 DIN1 DIN2 ROUT2
APPLICATIONS
5.5-V TWO-CHANNEL RS-232 1-Mbit/s LINE DRIVER/RECEIVER WITH 15-kV IEC ESD PROTECTION SLLS825 AUGUST 2007 Operates With 3-V to 5.5-V V CC Supply Operates up to Mbit/s Low Supply Current 300 μ A Typ External Capacitors 0.1 μ F Accept 5-V Logic Input With 3.3-V Supply Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II ESD Protection for RS-232 Pins 15-kV Human-Body Model (HBM) 15-kV IEC 61000-4-2 Air-Gap Discharge 8-kV IEC 61000-4-2 Contact Discharge Battery-Powered Systems PDAs Notebooks Laptops Palmtop PCs Hand-Held Equipment The TRSF3232E consists of two line drivers, two line receivers, and a dual charge-pump circuit with 15-kV ESD protection pin to pin (serial-port connection pins, including GND). This device provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The TRSF3232E operates at data signaling rates up to Mbit/s and a driver output slew rate of μ s to 150 μ ORDERING INFORMATION T A PACKAGE (1) (2) ORDERABLE PART NUMBER TOP-SIDE MARKING Tube of TRSF3232ECD SOIC D TRSF3232EC Reel of 2500 TRSF3232ECDR Tube of TRSF3232ECDW SOIC DW TRSF3232EC C to C Reel of 2000 TRSF3232ECDWR SSOP DB Reel of 2000 TRSF3232ECDBR RT32EC Tube of TRSF3232ECPW TSSOP PW RT32EC Reel of 2000 TRSF3232ECPWR Tube of TRSF3232EID SOIC D TRSF3232EI SOIC DW TRSF3232EIDR Tube of TRSF3232EIDW SOIC DW TRSF3232EI C to C TSSOP PW TRSF3232EIDWR SSOP DB Reel of 2000 TRSF3232EIDBR RT32EI Tube of TRSF3232EIPW TSSOP PW RT32EI Reel of 2000 TRSF3232EIPWR (1) Package drawings, thermal data, and symbolization are available at www.ti.com/packaging (2) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI website at www.ti.com Please be aware that an important notice concerning availability, standard warranty, and use in critical sheet. PRODUCTION DATA information is current as of publication date. Copyright 2007, Texas Instruments Incorporated Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.
www.ti.com TRSF3232E 3-V TO 5.5-V TWO-CHANNEL RS-232 1-Mbit/s LINE DRIVER/RECEIVER WITH 15-kV IEC ESD PROTECTION SLLS825 AUGUST 2007 Table 1-Mbit/s RS-232 Parts SUPPLY TEMPERATURE PART NO. OF NO. OF PIN/ ESD V CC FEATURE RANGE NO. DRIVERS RECEIVERS PACKAGE (V) 15-kV Air-Gap Discharge, 16-pin TRSF3221E 8-kV Contact Discharge, 3.3 or Auto-powerdown SOIC, SSOP, 15-kV HBM TSSOP 15-kV Air-Gap Discharge, 16-pin TRSF3232E 8-kV Contact Discharge, 3.3 or Low pin count SOIC, SSOP, 15-kV HBM TSSOP 8-kV Air-Gap Discharge, Auto-powerdown 16-pin TRS3227 8-kV Contact Discharge, 3.3 or plus, ready signal SSOP 15-kV HBM 16-pin TRSF3221 15-kV HBM 3.3 or Auto-powerdown SOIC, SSOP, TSSOP Enable, 20-pin C to C TRSF3222 15-kV HBM 3.3 or powerdown SOIC, SSOP, signal TSSOP 20-pin Auto-powerdown, TRSF3223 15-kV HBM 3.5 or SOIC, SSOP, enable signal TSSOP 16-pin TRSF3232 15-kV HBM 3.3 or Low pin count SOIC, SSOP, TSSOP 28-pin Auto-powerdown TRSF3238 15-kV HBM 3.3 or SOIC, SSOP, plus TSSOP 28-pin TRSF3243 15-kV HBM 3.3 or Auto-powerdown SOIC, SSOP, TSSOP 15-kV Air-Gap Discharge, 16-pin TRSF3221E 8-kV Contact Discharge, 3.3 or Auto-powerdown SOIC, SSOP, 15-kV HBM TSSOP 15-kV Air-Gap Discharge, 16-pin TRSF3232E 8-kV Contact Discharge, 3.3 or Low pin count SOIC, SSOP, 15-kV HBM TSSOP 8-kV Air-Gap Discharge, Auto-powerdown 16-pin TRS3227 8-kV Contact Discharge, 3.3 or plus, ready signal SSOP 15-kV HBM 16-pin TRSF3221 15-kV HBM 3.3 or Auto-powerdown SOIC, SSOP, TSSOP Enable, 20-pin C to C TRSF3222 15-kV HBM 3.3 or powerdown SOIC, SSOP, signal TSSOP 20-pin Auto-powerdown, TRSF3223 15-kV HBM 3.3 or SOIC, SSOP, enable signal TSSOP 16-pin TRSF3232 15-kV HBM 3.3 or Low pin count SOIC, SSOP, TSSOP 28-pin Auto-powerdown TRSF3238 15-kV HBM 3.3 or SOIC, SSOP, plus TSSOP 28-pin TRSF3243 15-kV HBM 3.3 or Auto-powerdown SOIC, SSOP, TSSOP Submit Documentation Feedback
www.ti.com DIN1 DOUT1 RIN1ROUT1 DIN2 DOUT2 RIN2ROUT2 5 k/C0087 5 k/C0087 TRSF3232E 3-V TO 5.5-V TWO-CHANNEL RS-232 1-Mbit/s LINE DRIVER/RECEIVER WITH 15-kV IEC ESD PROTECTION SLLS825 AUGUST 2007 FUNCTION TABLES xxx Each Driver (1) INPUT OUTPUT DIN DOUT L H H L (1) H high level, L low level Each Receiver (1) INPUT OUTPUT RIN ROUT L H H L Open H (1) H high level, L low level, Open input disconnected or connected driver off LOGIC DIAGRAM (POSITIVE LOGIC) Submit Documentation Feedback
www.ti.com Absolute Maximum Ratings (1) Recommended Operating Conditions (1) Electrical Characteristics (1) TRSF3232E 3-V TO 5.5-V TWO-CHANNEL RS-232 1-Mbit/s LINE DRIVER/RECEIVER WITH 15-kV IEC ESD PROTECTION SLLS825 AUGUST 2007 over operating free-air temperature range (unless otherwise noted) MIN MAX UNIT V CC Supply voltage range (2) 0.3 V Positive-output supply voltage range (2) 0.3 V V Negative-output supply voltage range (2) 0.3 V V Supply voltage difference (2) V Drivers 0.3 V I Input voltage range V Receivers Drivers 13.2 13.2 V O Output voltage range V Receivers 0.3 V CC 0.3 D package DB package θ JA Package thermal impedance (3) (4) C/W DW package PW package 108 T J Operating virtual junction temperature 150 C T stg Storage temperature range 150 C (1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. (2) All voltages are with respect to network GND. (3) Maximum power dissipation is a function of T J (max), θ JA and T A The maximum allowable power dissipation at any allowable ambient temperature is P D J (max) T A θ JA Operating at the absolute maximum T J of 150 C can affect reliability. (4) The package thermal impedance is calculated in accordance with JESD 51-7. MIN NOM MAX UNIT V CC 3.3 V 3.3 3.6 Supply voltage V V CC V 4.5 5.5 V CC 3.3 V V IH Driver high-level input voltage DIN V V CC V 2.4 V IL Driver low-level input voltage DIN 0.8 V Driver input voltage DIN 5.5 V I V Receiver input voltage TRSF3232EI T A Operating free-air temperature C TRSF3232EC (1) Test conditions are 0.1 μ F at V CC 3.3 V 0.3 0.047 μ 0.33 μ F at V CC V 0.5 V (see Figure over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted) PARAMETER TEST CONDITIONS MIN TYP (2) MAX UNIT I CC Supply current No load, V CC 3.3 V or V 0.3 mA (1) Test conditions are 0.1 μ F at V CC 3.3 V 0.3 0.047 μ 0.33 μ F at V CC V 0.5 V (see Figure (2) All typical values are at V CC 3.3 V or V CC and T A Submit Documentation Feedback
www.ti.com DRIVER SECTION Electrical Characteristics (1) Switching Characteristics (1) ESD Protection TRSF3232E 3-V TO 5.5-V TWO-CHANNEL RS-232 1-Mbit/s LINE DRIVER/RECEIVER WITH 15-kV IEC ESD PROTECTION SLLS825 AUGUST 2007 over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted) PARAMETER TEST CONDITIONS MIN TYP (2) MAX UNIT V OH High-level output voltage DOUT at R L k Ω to GND, DIN GND 5.5 V V OL Low-level output voltage DOUT at R L k Ω to GND, DIN V CC 5.4 V I IH High-level input current V I V CC 0.01 μ A I IL Low-level input current V I at GND 0.01 μ A V CC 3.6 V O V I OS (3) Short-circuit output current mA V CC 5.5 V O V r o Output resistance V CC V+, and V V O V 300 10M Ω (1) Test conditions are 0.1 μ F at V CC 3.3 V 0.3 0.047 μ 0.33 μ F at V CC V 0.5 V (see Figure (2) All typical values are at V CC 3.3 V or V CC and T A (3) Short-circuit durations should be controlled to prevent exceeding the device absolute power dissipation ratings, and not more than one output should be shorted at a time. over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted) PARAMETER TEST CONDITIONS MIN TYP (2) MAX UNIT C L 250 pF, V CC V to 4.5 V 1000 Maximum data rate R L k Ω kbit/s (see Figure One DOUT switching C L 1000 pF, V CC 3.5 V to 5.5 V 1000 t sk(p) Pulse skew (3) C L 150 pF to 2500 pF, R L k Ω to k Ω See Figure 300 ns Slew rate, SR(tr) transition region R L k Ω to k Ω C L 150 pF to 1000 pF, V CC 3.3 V 150 μ s (see Figure (1) Test conditions are 0.1 μ F at V CC 3.3 V 0.3 0.047 μ 0.33 μ F at V CC V 0.5 V (see Figure (2) All typical values are at V CC 3.3 V or V CC and T A (3) Pulse skew is defined as PLH t PHL of each channel of the same device. TERMINAL TEST CONDITIONS TYP UNIT NAME NO. HBM DOUT IEC 61000-4-2 Air-Gap Discharge kV IEC 61000-4-2 Contact Discharge Submit Documentation Feedback
www.ti.com RECEIVER SECTION Electrical Characteristics (1) Switching Characteristics (1) ESD Protection TRSF3232E 3-V TO 5.5-V TWO-CHANNEL RS-232 1-Mbit/s LINE DRIVER/RECEIVER WITH 15-kV IEC ESD PROTECTION SLLS825 AUGUST 2007 over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted) PARAMETER TEST CONDITIONS MIN TYP (2) MAX UNIT V OH High-level output voltage I OH mA V CC 0.6 V CC 0.1 V V OL Low-level output voltage I OL 1.6 mA 0.4 V V CC 3.3 V 1.5 2.4 V IT+ Positive-going input threshold voltage V V CC V 1.8 2.4 V CC 3.3 V 0.6 1.2 V IT Negative-going input threshold voltage V V CC V 0.8 1.5 V hys Input hysteresis IT+ V IT 0.3 V r i Input resistance V I V to V k Ω (1) Test conditions are 0.1 μ F at V CC 3.3 V 0.3 0.047 μ 0.33 μ F at V CC V 0.5 V (see Figure (2) All typical values are at V CC 3.3 V or V CC and T A over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted) PARAMETER TEST CONDITIONS TYP (2) UNIT t PLH Propagation delay time, low- to high-level output C L 150 pF 300 ns t PHL Propagation delay time, high- to low-level output C L 150 pF 300 ns t sk(p) Pulse skew (3) 300 ns (1) Test conditions are 0.1 μ F at V CC 3.3 V 0.3 0.047 μ 0.33 μ F at V CC V 0.5 V (see Figure (2) All typical values are at V CC 3.3 V or V CC and T A (3) Pulse skew is defined as PLH t PHL of each channel of the same device. TERMINAL TEST CONDITIONS TYP UNIT NAME NO. HBM RIN IEC 61000-4-2 Air-Gap Discharge kV IEC 61000-4-2 Contact Discharge Submit Documentation Feedback
www.ti.com PARAMETER MEASUREMENT INFORMATION 50 W TEST CIRCUIT VOLT AGE W AVEFORMS 0 V 3 V Output Input VOL VOH tTLH Generator (see Note B) R L RS-232 Output tTHLC L (see Note A) SR(tr)/C00436 V tTHL or tTLH NOTES: A. C L includes probe and jig capacitance. B. The pulse generator has the following characteristics: PRR = 250 kbit/s, ZO = 50 W , 50% duty cycle, tr ≤/charBnZrBnZrBnZrBnZrBnZrBnZrBnZrBnZr10 ns, tf ≤ 10 ns. 1.5 V 1.5 V 3 V −3 V 3 V −3 V TEST CIRCUIT VOLT AGE W AVEFORMS 0 V 3 V Output Input VOL VOH tPLHtPHL 50% 50% NOTES: A. C L includes probe and jig capacitance. B. The pulse generator has the following characteristics: PRR = 250 kbit/s, ZO = 50 W , 50% duty cycle, tr ≤ 10 ns, tf ≤ 10 ns. 1.5 V 1.5 V 50 W Generator (see Note B) R L RS-232 Output C L (see Note A) TEST CIRCUIT VOLT AGE W AVEFORMS 50 W 50%50% −3 V 3 V 1.5 V1.5 V Output Input VOL VOH tPHL Generator (see Note B) tPLH Output C L (see Note A) NOTES: A. C L includes probe and jig capacitance. B. The pulse generator has the following characteristics: ZO = 50 W , 50% duty cycle, tr ≤ 10 ns, tf ≤ 10 ns. TRSF3232E 3-V TO 5.5-V TWO-CHANNEL RS-232 1-Mbit/s LINE DRIVER/RECEIVER WITH 15-kV IEC ESD PROTECTION SLLS825 AUGUST 2007 Figure Driver Slew Rate Figure Driver Pulse Skew Figure Receiver Propagation Delay Times Submit Documentation Feedback
www.ti.com APPLICATION INFORMATION ROUT2 DIN2 RIN1 DIN1 −C3 VCC C2+ C1+ GND C1− ROUT1 C2− C BYPASS = 0.1 mF RIN2 C4 + VCC C1 C2, C3, C4 3.3 V ± 0.3 V 5 V ± 0.5 V 3 V to 5.5 V 0.1 mF 0.047 mF 0.1 mF 0.1 mF 0.33 mF 0.47 mF VCC vs CAPACITOR V ALUES DOUT1 DOUT2 5 kW 5 kW TRSF3232E 3-V TO 5.5-V TWO-CHANNEL RS-232 1-Mbit/s LINE DRIVER/RECEIVER WITH 15-kV IEC ESD PROTECTION SLLS825 AUGUST 2007 can be connected to V CC or GND. Figure Typical Operating Circuit and Capacitor Values Submit Documentation Feedback
Orderable Device Status(1) Package Type Package Drawing Pins Package Qty Eco Plan(2) Lead/Ball FinishMSL Peak Temp (3) TRSF3232ECD ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TRSF3232ECDB ACTIVE SSOP DB 16 80 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TRSF3232ECDBG4 ACTIVE SSOP DB 16 80 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TRSF3232ECDBR ACTIVE SSOP DB 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TRSF3232ECDBRG4 ACTIVE SSOP DB 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TRSF3232ECDG4 ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TRSF3232ECDR ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TRSF3232ECDRG4 ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TRSF3232ECDW ACTIVE SOIC DW 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TRSF3232ECDWG4 ACTIVE SOIC DW 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TRSF3232ECDWR ACTIVE SOIC DW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TRSF3232ECDWRG4 ACTIVE SOIC DW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TRSF3232ECPW ACTIVE TSSOP PW 16 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TRSF3232ECPWG4 ACTIVE TSSOP PW 16 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TRSF3232ECPWR ACTIVE TSSOP PW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TRSF3232ECPWRG4 ACTIVE TSSOP PW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TRSF3232EID ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TRSF3232EIDB ACTIVE SSOP DB 16 80 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TRSF3232EIDBG4 ACTIVE SSOP DB 16 80 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TRSF3232EIDBR ACTIVE SSOP DB 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TRSF3232EIDBRG4 ACTIVE SSOP DB 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TRSF3232EIDG4 ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TRSF3232EIDR ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TRSF3232EIDRG4 ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TRSF3232EIDW ACTIVE SOIC DW 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM PACKAGE OPTION ADDENDUM www.ti.com 26-Sep-2007 Addendum-Page 1
Orderable Device Status(1) Package Type Package Drawing Pins Package Qty Eco Plan(2) Lead/Ball FinishMSL Peak Temp (3) TRSF3232EIDWG4 ACTIVE SOIC DW 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TRSF3232EIDWR ACTIVE SOIC DW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TRSF3232EIDWRG4 ACTIVE SOIC DW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TRSF3232EIPW ACTIVE TSSOP PW 16 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TRSF3232EIPWG4 ACTIVE TSSOP PW 16 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TRSF3232EIPWR ACTIVE TSSOP PW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TRSF3232EIPWRG4 ACTIVE TSSOP PW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM (1)The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2)Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontentfor the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS):TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt):This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br):TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. PACKAGE OPTION ADDENDUM www.ti.com 26-Sep-2007 Addendum-Page 2
*All dimensions are nominal Device Package Type Package Drawing Pins SPQ Reel Diameter (mm) Reel Width W1 (mm) A0 (mm) B0 (mm) K0 (mm) P1 (mm) W (mm) Pin1 Quadrant PACKAGE MATERIALS INFORMATION www.ti.com 11-Mar-2008 Pack Materials-Page 1
*All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TRSF3232ECDBR SSOP DB 16 2000 346.0 346.0 33.0 TRSF3232ECDR SOIC D 16 2500 346.0 346.0 33.0 TRSF3232ECDWR SOIC DW 16 2000 346.0 346.0 33.0 TRSF3232ECPWR TSSOP PW 16 2000 346.0 346.0 29.0 TRSF3232EIDBR SSOP DB 16 2000 346.0 346.0 33.0 TRSF3232EIDR SOIC D 16 2500 346.0 346.0 33.0 TRSF3232EIDWR SOIC DW 16 2000 346.0 346.0 33.0 TRSF3232EIPWR TSSOP PW 16 2000 346.0 346.0 29.0 PACKAGE MATERIALS INFORMATION www.ti.com 11-Mar-2008 Pack Materials-Page 2
MSSO002E – JANUARY 1995 – REVISED DECEMBER 2001 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 DB (R-PDSO-G**) PLASTIC SMALL-OUTLINE 4040065 /E 12/01
28 PINS SHOWN
8,20 7,40 0,55 0,95 0,25 12,90 12,30 10,50 8,50 Seating Plane 9,907,90 10,50 9,90 0,38 5,60 5,00 0,22 A 2016 6,506,50 0,05 MIN 5,905,90 DIM A MAX A MIN PINS ** 2,00 MAX 6,90 7,50 0,65 M0,15 0°–/C02578° 0,10 0,09 0,25 NOTES: A. All linear dimensions are in millimeters. B. This drawing is subject to change without notice. C. Body dimensions do not include mold flash or protrusion not to exceed 0,15. D. Falls within JEDEC MO-150
MTSS001C – JANUARY 1995 – REVISED FEBRUARY 1999 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 PW (R-PDSO-G**) PLASTIC SMALL-OUTLINE PACKAGE
14 PINS SHOWN
0,65 M0,10 0,10 0,25 0,50 0,75 0,15 NOM Gage Plane 9,80 9,60 7,90 7,70 2016 6,60 6,40 4040064/F 01/97 0,30 6,60 6,20 0,19 4,30 4,50 0,15 A 1,20 MAX 5,10 4,90 3,10 2,90 A MAX A MIN DIM PINS ** 0,05 4,90 5,10 Seating Plane 0°–8° NOTES: A. All linear dimensions are in millimeters. B. This drawing is subject to change without notice. C. Body dimensions do not include mold flash or protrusion not to exceed 0,15. D. Falls within JEDEC MO-153
(TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for design. Customers are responsible for their products and components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products amplifier.ti.com Audio www.ti.com/audio Data Converters dataconverter.ti.com Automotive www.ti.com/automotive DLP Products www.dlp.com Broadband www.ti.com/broadband DSP dsp.ti.com Digital Control www.ti.com/digitalcontrol Clocks and Timers www.ti.com/clocks Medical www.ti.com/medical Interface interface.ti.com Military www.ti.com/military Logic logic.ti.com Optical Networking www.ti.com/opticalnetwork Power Mgmt power.ti.com Security www.ti.com/security Microcontrollers microcontroller.ti.com Telephony www.ti.com/telephony RFID www.ti-rfid.com Video Imaging www.ti.com/video RF/IF and ZigBee Solutions www.ti.com/lprf Wireless www.ti.com/wireless Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright 2009, Texas Instruments Incorporated