TRS-9380G OPTOWAY | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 TRS-9380CG / TRS-9380CTG / TRS-9380CFG 3.3V / 1550 nm / 2.5 Gbps RoHS Compliant Optical Single-Mode Transceiver

FEATURES

l Duplex SC Single Mode Transceiver: TRS-9380CG l Duplex ST Single Mode Transceiver: TRS-9380CTG l Duplex FC Single Mode Transceiver: TRS-9380CFG l SONET OC-48 LR-2/SDH STM-16 (L-16.2) Compliant l Fiber Channel 2X/1X SM-LC-L FC-PI Compliant l IEEE 802.3z Gigabit Ethernet 1000BASE-LX Compliant l 1550 nm DFB LD Transmitter l Industry Standard 1 x 9 Footprint l 0 to 70oC Operating l Single +3.3 V Power Supply l RoHS Compliant l TTL Signal Detect Output l Wave Solderable and Aqueous Washable l Class 1 Laser International Safety Standard IEC 60825 Compliant

APPLICATIONS

l Switch to Switch Interface l High Speed Interface for File Servers l High Performance Desktops

DESCRIPTION

The TRS-9380CG series single mode transceivers is low power, high performance module for bi-directional serial optical data communications such as SONET OC-48 LR-2 / SDH STM-16 (L-16.2), Gigabit Ethernet and 1X/2X Fiber channel. This module is designed for single mode fiber and operates at a nominal wavelength of 1550 nm. The transmitter section uses a multiple quantum well laser and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. A LVPECL logic interface simplifies interface to external circuitry. LASER SAFETY This single mode transceiver is a Class 1 laser product. It complies with IEC 60825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug. ORDER INFORMATION P/No. Bit Rate (Mb/s) SONET /SDH Distance (km) Wavelength (nm) Voltage (V) Package Temp. (oC) TX Power (dBm) RX Sens. (dBm) RoHS Compliant TRS-9380CG 2488 LR-2/L-16.2 80 1550 DFB 3.3 1X9 SC/ST/FC 0 to 70 3 to -2 -28 Y Note: TRS-XXXXXFG for FC duplex transceiver, TRS-XXXXX TG for ST duplex transceiver, TRS-XXXXX- EMG for SC duplex transceiver with extended EMI shielding, Absolute Maximum Ratings Parameter Symbol Min Max Units Notes Storage Temperature Tstg -40 85 oC Operating Temperature Topr 0 70 oC Soldering Temperature --- 260 oC 10 seconds on leads only Power Supply Voltage Vcc 0 4.5 V Input Voltage --- GND Vcc V Output Current Iout 0 30 mA Recommended Operating Conditions Parameter Symbol Min Typ Max Units Power Supply Voltage Vcc 3.13 3.3 3.47 V Operating Temperature Topr 0 70 oC Data Rate 622 2488 2670 Mb/s Power Supply Current Icc 200 300 mA

OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 Transmitter Specifications (0oC < Topr < 70oC, 3.13V < Vcc < 3.47V) Parameter Symbol Min Typ Max Units Notes Optical Optical Transmit Power Po -2 --- 3 dBm 1 Output Center Wavelength λ 1480 1550 1580 nm Output Spectrum Width Δλ --- --- 1 nm -20 dB width Side Mode Suppression Ratio SMSR 30 dB Extinction Ratio ER 8.2 --- --- dB Output Eye Compliant with IEEE 802.3z Optical Rise Time tr 150 ps 20% to 80% Values Optical Fall Time tf 150 ps 20% to 80% Values Relative Intensity Noise RIN -120 dB/Hz Electrical Data Input Current – Low IIL -350 µA Data Input Current – High IIH 350 µA Differential Input Voltage VIH - VIL 300 1600 mV Data Input Voltage – Low VIL - VCC -2.0 -1.58 V 2 Data Input Voltage -- High VIH - VCC -1.1 -0.74 V 2 Notes: 1. Output power is power coupled into a 9/125 µm single mode fiber. 2. These inputs are compatible with 10K, 10KH and 100K ECL and LVPECL inputs. Receiver Specifications (0oC < Topr < 70oC, 3.13 V < Vcc < 3.47V) Parameter Symbol Min Typ Max Units Notes Optical Sensitivity --- --- --- -28 dBm 1 Maximum Input Power Pin -9 --- dBm Signal Detect -- Asserted Pa --- --- -28 dBm Transition: low to high Signal Detect -- Deasserted Pd -40 --- --- dBm Transition: high to low Signal detect -- Hysteresis 1.0 --- dB Wavelength of Operation 1260 --- 1600 nm Electrical Data Output Voltage – Low VOL - VCC -2.0 -1.58 V 2 Data Output Voltage – High VOH - VCC -1.1 -0.74 V 2 Signal Detect Output Voltage -- Low VSDL 0.5 V Signal Detect Output Voltage -- High VSDH 2.0 V Notes: 1. Minimum sensitivity and saturation levels at BER=1E-10 for a 223-1 PRBS. 2. These outputs are compatible with 10K, 10KH and 100K ECL and PECL outputs.

OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 CONNECTION DIAGRAM Receiver Signal Ground 1 (Rx GND) Receiver Data Out 2 (RD+) N/C Receiver Data Out Bar 3 (RD−) Signal Detect 4 (SD) Receiver Power Supply 5 (Rx Vcc) TOP VIEW Transmitter Power Supply 6 (Tx Vcc) Transmitter Data In Bar 7 (TD−) Transmitter Data In 8 (TD+) N/C Transmitter Signal Ground 9 (Tx GND) PIN Symbol Notes

1 Rx GND Directly connect this pin to the receiver ground plane

2 RD+ See recommended circuit schematic

3 RD− See recommended circuit schematic

4 SD Active high on this indicates a received optical signal

5 Rx Vcc +3.3V dc power for the receiver section 6 Tx Vcc +3.3V dc power for the transmitter section

7 TD− See recommended circuit schematic

8 TD+ See recommended circuit schematic

9 Tx GND Directly connect this plan to the trransmitter ground plane

RECOMMENDED CIRCUIT SCHEMATIC 10nF 10uF 10nF 10uF RX GND 1 POST Amp LD Driver Z=50R Z=50R Z=50R Z=50R TX GND 1uH 1uH TD- TD+ TX VCC RX VCC RD- RD+ 0.1uF 0.1uF 100R Transceiver SD 100R VCC SD (TTL) R3 R4 R1 R2 PECL PECL For Vcc=3.3V, R1=R2=R3=R4= 180R The split-load terminations for ECL signals need to be located at the input of devices receiving those ECL signals. The power supply filtering is required for good EMI performance. Use short tracks from the inductor L1/L2 to the module Rx Vcc and Tx Vcc. A GND plane under the module is required for good EMI and sensitivity performance.

OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 PACKAGE DIAGRAM Units in mm 1) SC Type With Extended Shielding TX OPTICAL RX OPTICAL TRS-9380C-EMG 2) SC Type With Flat Extended Shielding TX OPTICAL RX OPTICAL TRS-9380C-EM1G

OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 3) ST Type RX OPTICAL TX OPTICAL TRS-9380CTG 4) FC Type TX OPTICAL RX OPTICAL 13.9 5.97 10.18 34.5MAX 20.32 0.75 13.710 25.4 2.54*8 20.32 O1.3 12.7 TRS-9380CFG Note: Specifications subject to change without notice.