TRS-5280G OPTOWAY | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 TRS-5280G / TRS-5280TG / TRS-5280FG / TRS-5280CG / TRS-5280CTG / TRS-5280CFG 5V / 1550 nm / 622 Mbps RoHS Compliant Optical Single-Mode Transceiver

FEATURES

l Duplex SC Single Mode Transceiver: TRS-5280G l Duplex ST Single Mode Transceiver: TRS-5280TG l Duplex FC Single Mode Transceiver: TRS-5280FG l Long-Reach SONET OC-3 / SDH STM-4 (L-4.2) Compliant l 1550 nm DFB LD Transmitter l Industry Standard 1 x 9 Footprint l Single +5 V Power Supply l RoHS Compliant l 0 to 70oC Operatring: TRS-5280G l -20 to 85oC Operatring: TRS-5280AG l PECL Signal Detection Output: TRS-5280G l TTL Signal Detection Output: TRS-5280CG l LED Multisourced 1 x 9 Transceiver Interchangeable l Wave Solderable and Aqueous Washable l Class 1 Laser International Safety Standard IEC-60825 Compliant

APPLICATIONS

l SONET/SDH Equipment Interconnect l Fiber Channel 532 Mbps Links

DESCRIPTION

The TRS-5280G series single mode transceivers is low power, high performance module for bi-directional serial optical data communications such as SONET OC-12 / SDH STM-4. This module is designed for single mode fiber and operates at a nominal wavelength of 1550 nm. The transmitter section uses a multiple quantum well 1550 nm DFB laser and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. A PECL logic interface simplifies interface to external circuitry. LASER SAFETY This single mode transceiver is a Class 1 laser product. It complies with IEC-60825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug. ORDER INFORMATION P/No. Bit Rate (Mb/s) SONET /SDH Distance (km) Wavelength (nm) Voltage (V) Package Temp. (oC) TX Power (dBm) RX Sens. (dBm) RoHS Compliant TRS-5280G 622 LR-2 80 1550 DFB 5 1X9 SC/ST/FC 0 to 70 2 to -3 -28 Yes TRS-5280AG 622 LR-2 80 1550 DFB 5 1X9 SC/ST/FC -20 to 85 2 to -3 -28 Yes Absolute Maximum Ratings Parameter Symbol Min Max Units Notes Storage Temperature Tstg -40 85 oC Operating Temperature Topr 0 -20 oC TRS-5280G TRS-5280AG Soldering Temperature --- 260 oC 10 seconds on leads only Power Supply Voltage Vcc 0 6 V Input Voltage --- GND Vcc V Output Current Iout 0 30 mA Recommended Operating Conditions Parameter Symbol Min Typ Max Units Power Supply Voltage Vcc 4.75 5 5.25 V Operating Temperature Topr 0 -20 oC / TRS-5280G oC / TRS-5280AG Data Rate 50 622 Mb/s Power Supply Current Icc 260 mA

OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 Transmitter Specifications (0oC < Topr < 70oC, 4.75V < Vcc < 5.25V) Parameter Symbol Min Typ Max Units Notes Optical Optical Transmit Power Po -3 --- 2 dBm 1 Output Center Wavelength λ 1480 1550 1580 nm Output Spectrum Width Δλ --- --- 1 nm -20 dB Width Side Mode Suppression Ratio SMSR 30 dB Extinction Ratio ER 10 --- --- dB Output Eye Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957 Optical Rise Time tr 1.2 ns 10% to 90% Values Optical Fall Time tf 1.2 ns 10% to 90% Values Relative Intensity Noise RIN -116 dB/Hz Total Jitter TJ 0.55 ns 2 Electrical Data Input Current – Low IIL -350 µA Data Input Current – High IIH 350 µA Differential Input Voltage VIH - VIL 300 mV Data Input Voltage – Low VIL - VCC -2.0 -1.58 V 3 Data Input Voltage -- High VIH - VCC -1.1 -0.74 V 3 Notes: 1. Output power is power coupled into a 9/125 µm single mode fiber. 2. Measured with a 223-1 PRBS with 72 ones and 72 zeros. 3. These inputs are compatible with 10K, 10KH and 100K ECL and LVPECL inputs. Receiver Specifications (0oC < Topr < 70oC, 4.75 V < Vcc < 5.25V) Parameter Symbol Min Typ Max Units Notes Optical Sensitivity --- --- --- -28 dBm 1 Maximum Input Power Pin -3 --- dBm Signal Detect -- Asserted Pa --- --- -28 dBm Transition: low to high Signal Detect -- Deasserted Pd -40 --- --- dBm Transition: high to low Signal detect -- Hysteresis 1.0 --- dB Wavelength of Operation 1100 --- 1600 nm Electrical Data Output Voltage – Low VOL - VCC -2.0 -1.58 V 2 Data Output Voltage – High VOH - VCC -1.1 -0.74 V 2 Signal Detect Output Voltage -- Low VOL - VCC -2.0 -1.58 V Signal Detect Output Voltage -- High VOH - VCC -1.1 -0.74 V TRS-5280G Signal Detect Output Voltage -- Low VSDL 0.8 V Signal Detect Output Voltage -- High VSDH 2.0 V TRS-5280CG Notes: 1. Minimum sensitivity and saturation levels at BER1E-10 for a 223-1 PRBS with 72 ones and 72 zeros. 2. These outputs are compatible with 10K, 10KH and 100K ECL and LVPECL outputs.

OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 CONNECTION DIAGRAM Receiver Signal Ground 1 (Rx GND) Receiver Data Out 2 (RD+) N/C Receiver Data Out Bar 3 (RD−) Signal Detect 4 (SD) Receiver Power Supply 5 (Rx Vcc) TOP VIEW Transmitter Power Supply 6 (Tx Vcc) Transmitter Data In Bar 7 (TD−) Transmitter Data In 8 (TD+) N/C Transmitter Signal Ground 9 (Tx GND) PIN Symbol Notes

1 Rx GND Directly connect this pin to the receiver ground plane

2 RD+ See recommended circuit schematic

3 RD− See recommended circuit schematic

4 SD Active high on this indicates a received optical signal

5 Rx Vcc +5V dc power for the receiver section

6 Tx Vcc +5V dc power for the transmitter section

7 TD− See recommended circuit schematic

8 TD+ See recommended circuit schematic

9 Tx GND Directly connect this plan to the trransmitter ground plane

RECOMMENDED CIRCUIT SCHEMATIC The split-load terminations for ECL signals need to be located at the input of devices receiving those ECL signals. The power supply filtering is required for good EMI performance. Use short tracks from the inductor L1/L2 to the module Rx Vcc and Tx Vcc. A GND plane under the module is required for good EMI and sensitivity performance.

OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 PACKAGE DIAGRAM Units in mm 1) SC Type TX OPTICAL RX OPTICAL TRS-5280G / TRS-5280CG / TRS-5280AG / TRS-5280ACG 2) SC Type With Extended Shielding RX OPTICAL TX OPTICAL TRS-5280-EMG / TRS-5280C-EMG / TRS-5280A-EMG / TRS-5280AC-EMG

OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 3) ST Type RX OPTICAL TX OPTICAL TRS-5280TG / TRS-5280CTG / TRS-5280ATG / TRS-5280ACTG 4) FC Type TX OPTICAL RX OPTICAL 13.9 5.97 10.18 34.5MAX 20.32 0.75 13.710 25.4 2.54*8 20.32 O1.3 12.7 TRS-5280FG / TRS-5280CFG / TRS-5280AFG / TRS-5280ACFG Note: Specifications subject to change without notice.