DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Features

The TRPE03KE2C000x0G SFP fiber optic transceivers with integrated digital diagnostics monitoring functionality provide a quick and reliable interface for optical supervisory channel applications. The diagnostic functions, alarm and warning features as described in the Multi-Source Agreement (MSA) document, SFF-8472 (Rev. 9.4), are provided via an I 2C serial interface. The TRPE03KE2C000x0G transceivers use a CWDM DFB laser and an APD receiver to provide an optical link power budget of 44dB. The transceiver satisfies Class I Laser Safety requirements in accordance with the U.S. FDA/CDRH and international IEC-60825 standards. The transceivers connect to a standard 20-pad connector for hot plug capability. This allows the system designer to make configuration changes or maintenance by simply plugging in different types of transceivers without removing the power supply from the host system. The transceivers have colored bail-type latch, which offers an easy and convenient way to release the module. The latch is compliant with the SFP MSA. The transmitter and receiver DATA interfaces are AC coupled internally. LV-TTL Transmitter Disable control input and Loss of Signal output interfaces are also provided. The transceivers operate from a single +3.3V power supply over an operating case temperature range of -5°C to +70°C (COM). The housing is made of metal for EMI immunity.  CWDM DFB Transmitter and APD Receiver  Lead Free Design & RoHS 6 Compliant  44 dB link budget  Compatible with SFP MSA  Designed for SONET OC-3 (156Mb/s) OSC

Applications

 Digital Diagnostics through Serial Interface  External Calibration for Digital Diagnostics  Eye Safe (Class I Laser Safety)  Duplex LC Optical Interface  Excellent EMIT & ESD Protection Parameter Symbol Minimum Maximum Units Storage Temperature Range TST - 40 + 85 °C Operating Temperature Range 1 TOP - 5 + 70 °C Supply Voltage VCC 0 + 5.0 V Maximum Input Optical Power 2 Pin, max - + 3.0 dBm Input Voltage VIN 0 VCC V 1 Measured on top side of SFP module at the front center vent hole of the cage.

2 In order to protect APD ROSA, high input optical power Endure time <30S

OC-3 CWDM Optical Supervisory Channel SFP Transceiver

S0191, Rev.022 TRPE03KE2C000x0G CWDM Oplink Communications, Inc Laser Safety Oplink Communications, Inc. DATE OF MANUFACTURE: This product complies with 21 CFR 1040.10 and 1040.11 Meets Class I Laser Safety Requirements Laser Safety: All transceivers are Class I Laser products per FDA/CDRH and IEC-60825 standards. They must be operated under specified operating conditions. Transmitter Performance Characteristics Parameter Symbol Minimum Typical Maximum Units Operating Data Rate 1 B - 156 - Mb/s Average Optical Output Power (coupled into single mode fiber), 50% duty cycle PO + 1.0 - + 5.0 dBm Extinction Ratio Phi / Plo 10 - - dB Center Wavelength 1471 λC 1464.5 1471 1477.5 nm 1491 1484.5 1491 1497.5 1511 1504.5 1511 1517.5 1531 1524.5 1531 1537.5 1551 1544.5 1551 1557.5 1571 1564.5 1571 1577.5 1591 1584.5 1591 1597.5 1611 1604.5 1611 1617.5 Spectral Width (-20dB) Δλ20 - - 1.0 nm Side Mode Suppression Ratio SMSR 30 - - dB Transmitter Output Eye Compliant with Telcordia GR-253-CORE and ITU-T Recommendation G.957 1 Data rate ranges from 50Mb/s to 266Mb/s. However, some degradation may be incurred in overall performance. Receiver Performance Characteristics Parameter Symbol Minimum Typical Maximum Units Operating Data Rate 1 B - 156 - Mb/s Receiver Sensitivity (10 -10 BER) 2 Pmin - 43.0 - - dBm Maximum Input Optical Power (10 -12 BER) 2 Pmax - 7.0 - - dBm LOS Thresholds Increasing Light Input Plos+ - - - 43.0 dBm Decreasing Light Input Plos- - 52.0 - - LOS Timing Delay Increasing Light Input t_loss_off - - 100 µs Decreasing Light Input t_loss_on 2.3 - 100 LOS Hysteresis - 0.5 - - dB Wavelength of Operation λ 1100 - 1600 nm Receiver Reflectance - - - - 25.0 dB 1 Data rate ranges from 50Mb/s to 266Mb/s. However, some degradation may be incurred in overall performance. 2 Measured with 223-1 PRBS at 156Mb/s.

S0191, Rev.023 TRPE03KE2C000x0G CWDM Oplink Communications, Inc Electrical Pad Layout Host Board Connector Pad Layout Bottom of Board (as viewed thru top of board)Top of Board Toward Bezel Toward ASIC TX GND TD- (TX DATA IN-) TD+ (TX DATA IN+) TX GND VccTX VccRX RX GND RD+ (RX DATA OUT+) RD- (RX DATA OUT-) RX GND TX GND TX Fault TX Disable MOD_DEF(2) MOD_DEF(1) MOD_DEF(0) NO CONNECTION LOS RX GND RX GND Transmitter Performance Characteristics Parameter Symbol Minimum Typical Maximum Units Input Voltage Swing (TD+ & TD-) 1 VPP-DIF 0.25 - 2.4 V Input HIGH Voltage (TX Disable) 2 VIH 2.0 - VCC V Input LOW Voltage (TX Disable) 2 VIL 0 - 0.8 V Output HIGH Voltage (TX Fault) 3 VOH 2.0 - VCC + 0.3 V Output LOW Voltage (TX Fault) 3 VOL 0 - 0.8 V 1 Differential peak-to-peak voltage. 2 There is an internal 4.7 to 10kΩ pull-up resistor to VccT. 3 Open collector compatible, 4.7 to 10kΩ pull-up resistor to Vcc (Host Supply Voltage). Receiver Electrical Interface Parameter Symbol Minimum Typical Maximum Units Differential Output Voltage Swing (RD+ & RD-) 1 VPP-DIF 0.6 - 2.0 V Output HIGH Voltage (LOS) 2 VOH 2.0 - VCC + 0.3 V Output LOW Voltage (LOS) 2 VOL 0 - 0.5 V 1 Differential peak-to-peak voltage across external 100Ω load. 2 Open collector compatible, 4.7 to 10kΩ pull-up resistor to Vcc (Host Supply Voltage). Electrical Power Supply Characteristics Parameter Symbol Minimum Typical Maximum Units Supply Voltage VCC 3.13 3.30 3.47 V Supply Current ICC - 210 310 mA Module Definition MOD_DEF(0) pin 6 MOD_DEF(1) pin 5 MOD_DEF(2) pin 4 Interpretation by Host TTL LOW SCL SDA Serial module definition protocol

Oplink Communications, Inc 2011-07-14 S0191, Rev.024 TRPE03KE2C000x0G CWDM TX DATA IN+ 1H coil or ferrite beadµ (<0.2 Ω series resistance) 0.1 TX DATA IN- TX Disable 0.1+ 0.1+ to 50 Ω load 3.3V RX DATA OUT+ RX DATA OUT- MOD_DEF(0) MOD_DEF(1) MOD_DEF(2) LOS to 50Ω load TX Fault Vcc 3.3V Vcc 50Ω line50Ω line 50Ω line 50Ω line RRRRR Application Notes Application Schematic R: 4.7 to 10kΩ CAP Values in µF SFP condition, it activates the serial protocol (standard two-wire I2C serial interface) and generates the serial clock signal (SCL). The positive edge clocks data into the EEPROM segments of the SFP that are not write protected, and the negative edge clocks data from the SFP . The serial data signal (SDA) is for serial data transfer. The host uses SDA in conjunction with SCL to mark the startand end of serial protocol activation. The supported monitoring functions are internal temperature, supply voltage, bias current, transmitter power, average receiver signal, all alarms and warnings and software monitoring of TX Fault/LOS. The device is internally calibrated. The data transfer protocol and the details of the mandatory and vendor specific data structures are defined in the SFPMSA, and SFF-8472, Rev. 9.4 Power supply and grounding: The power supply line should be well-filtered. All 0.1μF power supply bypass capacitors should be as close to the transceiver module as possible. Electrical interface: All signal interfaces are compliant with the SFP MSA specification. The high speed DATA interface is differential AC-coupled internally with 1μF and can be directly connected to a 3.3V SERDES IC. All low speed control and sense output signals are open collector TTL compatible and should be pulled up with a 4.7 - 10kΩ resistor on the host board Loss of Signal (LOS): The Loss of Signal circuit monitors the level of the incoming optical signal and generates a logic HIGH when an insufficient photocurrent is produced. TX_Fault: The output indicates LOW when the transmitter is operating normally, and HIGH with a laser fault including laser end-of-life. TX Fault is an open collector/drain output that should be pulled up with a 4.7 - 10kΩ resistor on the host board. TX Fault is latched per SFP MSA. TX_Disable: When the TX Disable pin is at logic HIGH, the transmitter optical output is disabled (less than -45dBm). Serial Identification and Monitoring: The module definition of SFP is indicated by the three module definition pins, MOD_DEF(0), MOD_DEF(1) and MOD_DEF(2). Upon power up, MOD_DEF(1:2) appear as NC (no connection), and MOD_DEF(0) is TTL LOW. When the host system detects this

Oplink Communications, Inc. reserves the right to make changes in equipment design or specifications without notice. Information supplied by Oplink Commu- nications, Inc. is believed to be accurate and reliable. However, no responsibility is assumed by Oplink Communications, Inc. for its use nor for any infringements of third parties, which may result from its use. No license is granted by implication or otherwise under any patent right of Oplink Communications, Inc. © 2011, Oplink Communications, Inc. 46335 Landing Pkwy Fremont, CA 94538 T el: (510) 933-7200 Fax: (510) 933-7300 Email: Sales@Oplink.com • www.oplink.com 5 2011-07-14 S0191, Rev.02 TRPE03KE2C000x0G CWDM Model Name Operating Temperature Norminal Wavelength (nm) Link Budget Latch Color TRPE03KE2C00010G - 5 °C to + 70 °C Commercial 1471 44dB Gray TRPE03KE2C00020G - 5 °C to + 70 °C Commercial 1491 44dB Violet TRPE03KE2C00030G - 5 °C to + 70 °C Commercial 1511 44dB Blue TRPE03KE2C00040G - 5 °C to + 70 °C Commercial 1531 44dB Green TRPE03KE2C00050G - 5 °C to + 70 °C Commercial 1551 44dB Yellow TRPE03KE2C00060G - 5 °C to + 70 °C Commercial 1571 44dB Orange TRPE03KE2C00070G - 5 °C to + 70 °C Commercial 1591 44dB Red TRPE03KE2C00080G - 5 °C to + 70 °C Commercial 1611 44dB Brown

Ordering Information

Dimensions in inches [mm] Default tolerances: 1.49 ]950.[ 1.99 ]870.[ 10.45 [.411] 11.94 [.470] 8.46 [.333] 0.45 ]810.[ 0.60 ]420.[ 0.60 ]420.[ 13.62 [.536] 14.94 [.588] 45.00 [1.772] 13.80 [.543] 2.50 ]890.[ 6.54 [.257] 9.20 [.362] 41.80 [1.646] 6.25 [.246] 2.29 [.090]