TRG45A POWERBOX | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 1

Technical content

45 WATTS - AC/DC GENERAL SINGLE OUTPUT

FEATURES

  • Wide input voltage
  • Continuous short circuit protection
  • Over voltage protection
  • Output voltage available from 12VDC to 48VDC
  • High efficiency 87% typical
  • Meets EN55022 Class ”B”, conducted emissions
  • MEPS compliance, Efficiency Mark V
  • ROHS compliance INPUT Voltage range 90 to 264Vac Frequency 47Hz to 63Hz Inrush current 70A max @ 240Vac Isolation Input to Output 4,242Vdc Leakage current 3.5mA max. OUTPUT Output voltage Factory preset, see table (not adjustable) Voltage set-point + 2% 60% full load Ripple and noise 1% p-p max Short circuit protection Continuous (Auto recovery) Over voltage protection Yes Hold-up time 8ms typ @ 115Vac Load regulation +/-2 to +/-3% (20% to 100% load) Model Dependent Line regulation +/-1% max 100Vac to 240Vac at full load ENVIRONMENTAL Operating temperature 0°C to +60°C Load derating Derate from 100% at 40°C linearly to 60% at 60°C Storage temperature -20°C t+85°C MODEL NUMBER RATED VNOM OUTPUT CURRENT MAX POWER TRG45A120- 21E11-V 12Vdc 3.75A 45W TRG45A150- 21E11-V 15Vdc 3.00A 45W TRG45A180- 21E11-V 18Vdc 2.50A 45W TRG45A190- 21E11-V 19Vdc 2.37A 45W TRG45A240- 21E11-V 24Vdc 1.88A 45W TRG45A480- 21E11-V 48Vdc 1.00A 48W STANDARDS AND APPROVALS Safety standards Queensland Electrical Safety Office Certificate of approval Qld Q090052, AS/NZS 609050.1:2003, EN60950 C-tick AS/NZS CISPR 11:2002 Group 1 EMI standards Meets EN55022 Class B and CISPR/FCC Class B RCM Complies with AS/NZS 4417 Parts 1,2,3 N911 MECHANICAL Dimensions 132 x 58 x 30mm Weight 280g AC Inlet IEC320/C14 Output connector Right angle, hollow barrel connector, 2.5mm inside diameter; 5.5mm outside diameter; 9.5mm length Center positive polarity. DC cord length 720mm with ferrite core 18AWG/UL1185 SELECTION TABLE Consult Powerbox for variation of ouput connector and DC Cord lengths TECHNICAL ILLUSTRATION SPECIFICATIONS