TREK-152 ADVANTECH | Alldatasheet
Document overview
- PDF pages: 1
Technical content
Features
Mask-wearing detection Fatigue detection - drowsiness, yawning Distraction detection - smoking, food consumption, cellphone usage, attention tracking (head turns more than 30° left or right) Infrared LED complies with the IEC 62471 standard for eye safety in low-light environments Drivers wearing coated glasses and ambient light reflection does not impact performance Introduction TREK-152 is an intelligent driver behavior recognition camera module that can be integrated with in-vehicle computers for video recording, streaming, and analysis. Built with AI technologies and deep learning algorithms for precise recognition, TREK-152 is designed for driver behavior monitoring - specifically drowsiness, distraction, and mask-wearing detection. To ensure flexible deployment in a wide variety of vehicles, the camera supports an effective detection range of 60 ~ 120 cm/23.6 ~ 47.2 inch. When undesirable behavior is detected, the module issues an alarm notification via an RS-232 event. By providing real-time behavior detection and driver warning alerts, TREK-152 enables intelligent driver behavior management for increased road safety. Specifications Intelligent Video Analysis* Mask Wearing Detection Whether the driver is wearing a face mask Driver Fatigue Detection Alerts for Drowsiness (eyes closed longer than threshold time) Yawning Mask wearing does not impact detection performance. Distraction Detection Alerts for Lack of attention (gaze moves/head turns more than 30° left or right) Cellphone use Eating/smoking Driver absence Detection Conditions Distance between driver’s face and camera lens: 60 ~ 120 cm/23.6 ~ 47.2 inch Anti-glare IR LED Suitable for low-light environments, reflected ambient light, and drivers wearing coated glasses Electrical Interface Camera Sensor CMOS type, monochrome, global shutter, active pixel array 1280H x 800V , 1.0 MP , 45° FoV (horizontal) I/O 1 x 2-wire RS-232, 1 x video out (RCA, male), 1 x VCC/ACC/GND Power Input 12/24 V vehicle power (10 ~ 36 VDC and ISO-7637-II compliant) Power Consumption 8.4 W (typical), including with camera module and ECU box Environmental Operating Temperature -30 ~ 85 °C/-22 ~ 185 °F Storage Temperature -40 ~ 85 °C/-40 ~ 185 °F Shock/Vibration EN60721 (5M3) Certification EMC CE, FCC, Emark, VSCC, BSMI (The last three are in certification process and will be determined in August) Mechanical Dimensions (W x H x D) Camera module (w/o mount): 102 x 22 x 38 mm/4 x 0.86 x 1.49 in Camera bracket: 110 mm/4.33 in (H), 80 x 60 mount holes Weight ECU box: 440 g/0.97 lb Camera module (with mount): 294 g/0.64 lb * Detection accuracy may be affected by certain factors (e.g., lens obstruction) and/or environmental conditions.
Ordering Information
TREK-152-D001A0E AI driver behavior recognition module with NTSC video output and RS-232 event logging Disclaimer 1. Environmental conditions or obstructions of the camera lens may block event triggers. 2. The presence of dirt or moisture on the camera lens can affect recognition accuracy. 3. TREK-152 only monitors driver behavior and emits alarm notifications if any preconfigured behaviors are detected. It does not replace any functions drivers would ordinarily perform when driving, nor does it eliminate the need to remain vigilant and alert at all times, to conform to safe driving practices, and to obey traffic regulations. Camera module ECU box Intelligent Driver Behavior Recognition Module All product specifications are subject to change without notice. Last updated: 1-Jun-2022 Preliminary