TR5050 MARKTECH | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Subject to change without notice. www.cree.com

FEATURES

  • Rectangular LED RF Performance – 450 & 460 nm – 180 mW min
  • Adhesive Die Attach
  • Low Forward Voltage – 3.3 V Typical at 120 mA
  • Maximum DC Forward Current - 180 mA
  • Class 2 ESD Rating
  • InGaN Junction on Thermally Conductive SiC Substrate

APPLICATIONS

  • Large LCD Backlighting – Television
  • General Illumination
  • Medium LCD Backlighting – Portable PCs – Monitors
  • LED Video Displays
  • White LEDs TR5050™ LEDs CxxxTR5050-Sxx000 Data Sheet Cree’s TR5050 LEDs are the next generation of solid-state LED emitters that combine highly efficient InGaN materials with Cree’s proprietary device technology and silicon-carbide substrates to deliver superior value for the TV-backlighting and general-illumination markets. The TR5050 LEDs are among the brightest in the top-view market while delivering a low forward voltage, resulting in a very bright and highly efficient solution. The design is optimally suited for industry- standard top-view packages. CxxxTR5050-Sxx000 Chip Diagram D ata Sheet: CPR3ER Rev. - Top View Bottom ViewDie Cross Section Anode (+) 90-μm diameter TR5050 LED 500 x 500 μm t = 175 μm Bottom Surface 327 x 327 μm Cathode (-) 98-μm diameter

Copyright © 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks, and TR and TR5050 are trademarks of Cree, Inc. 2 CPR3ER Rev. - Cree, Inc.

4600 Silicon Drive

Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com Maximum Ratings at TA = 25°C Notes 1&3 CxxxTR5050-Sxx000 DC Forward Current Note 4 180 mA Peak Forward Current (1/10 duty cycle @ 1 kHz) 230 mA LED Junction Temperature 150°C Reverse Voltage 5 V Operating Temperature Range -40°C to +100°C Storage Temperature Range -40°C to +100°C Electrostatic Discharge Threshold (HBM) Note 2 1000 V Electrostatic Discharge Classification (MIL-STD-883E) Note 2 Class 2 Typical Electrical/Optical Characteristics at TA = 25°C, If = 120 mA Note 3 Part Number Forward Voltage (Vf, V) Reverse Current [I(Vr=5V), μA] Full Width Half Max (λD, nm) C450TR5050-Sxx000 2.7 3.3 3.5 2 20 C460TR5050-Sxx000 2.7 3.3 3.5 2 21 Mechanical Specifications CxxxTR5050-Sxx000 Description Dimension Tolerance P-N Junction Area (μm) 426 x 443 ±35 Chip Area (μm) 500 x 500 ±35 Chip Thickness (μm) 175 ±15 Au Bond Pad Diameter Anode (μm) 90 ±10 Au Bond Pad Thicknesses (μm) 1.0 ±0.5 Au Bond Pad Diamater Cathode (μm) 98 ±10 Bottom Area (μm) 327 x 327 ±35 Notes: 1. Maximum ratings are package-dependent. The above ratings were determined using lamps in chip-on-MCPCB (metal core PCB) packages for characterization. Ratings for other packages may differ. Junction temperature should be characterized in a specific package to determine limitations. Assembly processing temperature must not exceed 325°C (< 5 seconds). 2. Product resistance to electrostatic discharge (ESD) according to the HBM is measured by simulating ESD using a rapid avalanche energy test (RAET). The RAET procedures are designed to approximate the maximum ESD ratings shown. 3. All products conform to the listed minimum and maximum specifications for electrical and optical characteristics when assembled and operated at 120 mA within the maximum ratings shown above. Efficiency decreases at higher currents. Typical values given are within the range of average values expected by manufacturer in large quantities and are provided for information only. All measurements were made using lamps in T-1 3/4 packages (with Hysol OS4000 epoxy encapsulant and clear epoxy die attach). Optical characteristics measured in an integrating sphere using Illuminance E. 4. The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end-product to be designed in a manner that minimizes the thermal resistance from the LED junction to ambient in order to optimize product performance.

Copyright © 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks, and TR and TR5050 are trademarks of Cree, Inc. 3 CPR3ER Rev. - Cree, Inc. Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com Standard Bins for CxxxTR5050-Sxx000 LED chips are sorted to the radiant flux and dominant wavelength bins shown. A sorted die sheet contains die from only one bin. Sorted die kit (CxxxTR5050-Sxxxx) orders may be filled with any or all bins (CxxxTR5050-xxxx) contained in the kit. All radiant flux and dominant wavelength values shown and specified are at If = 120 mA. Note: The radiant-flux values above are representative of the die in a Cree 5-mm lamp. C450TR5050-S18000 C450TR5050-0209 C450TR5050-0210 C450TR5050-0211 C450TR5050-0212 C450TR5050-0205 C450TR5050-0206 C450TR5050-0207 C450TR5050-0208 C450TR5050-0201 C450TR5050-0202 C450TR5050-0203 C450TR5050-0204 Dominant Wavelength (nm) 447.5 450 452.5445 455 220.0 200.0 180.0 Radiant Flux (mW)

Copyright © 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks, and TR and TR5050 are trademarks of Cree, Inc. 4 CPR3ER Rev. - Cree, Inc. Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com Characteristic Curves These are representative measurements for the TR5050 LED product. Actual curves will vary slightly for the various radiant flux and dominant wavelength bins. 25% 50% 75% 100% 125% 150% 175% 0 50 100 150 200 Relative Light Intensity If (mA) Relative Intensity vs. Forward Current 0 50 100 150 200 Dominant Wavelength Shift (nm) If (mA) Wavelength Shift vs. Forward Current 100 125 150 175 200 0 0.5 1 1.5 2 2.5 3 3.5 4 If (mA) Vf (V) Forward Current vs. Forward Voltage 70% 75% 80% 85% 90% 95% 100% 25 50 75 100 125 150 Relative Light Intensity Junction Temperature (°C) Relative Light Intensity Vs Junction Temperature 25 50 75 100 125 150 Dominant Wavelength Shift (nm) Junction Temperature (°C) Dominant Wavelength Shift Vs Junction Temperature -0.400 -0.350 -0.300 -0.250 -0.200 -0.150 -0.100 -0.050 0.000 25 50 75 100 125 150 Voltage Shift (V) Junction Temperature (°C) Voltage Shift Vs Junction Temperature 25% 50% 75% 100% 125% 150% 175% 0 20 40 60 80 100 120 140 160 180 Relative Light Intensity If (mA) Relative Intensity vs. Forward Current 0 20 40 60 80 100 120 140 160 180 Dominant Wavelength Shift (nm) If (mA) Wavelength Shift vs. Forward Current 100 120 140 160 180 0 0.5 1 1.5 2 2.5 3 3.5 4 If (mA) Vf (V) Forward Current vs. Forward Voltage

Copyright © 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks, and TR and TR5050 are trademarks of Cree, Inc. 5 CPR3ER Rev. - Cree, Inc. Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com Radiation Pattern This is a representative radiation pattern for the TR5050 LED product. Actual patterns will vary slightly for each chip. Copyright © 2010, Cree, Inc. (Confidential) pg. 2 Far Fields – TR500