DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
SWITCHCRAFT, INC, 5555 N. Elston Ave. * Chicago, IL 60630 + 773 792-2700 * FAX: 773 792-2129 * www.switchcraft.com (. 401" SUBMINIATURE PHONE JACKS > S Vig v TR2A TRIPC MDPC2A MDSL2A MDSL2ARA MDPC2ARA SUBMINIATURE PHONE JACKS, TR2AAND TRIPC — SPECIFICATIONS - MICRO-JAX® Extremely small, rugged, shunted Micro-Jax® 2-conductorjack ELECTRICAL is 1/4 the size of a standard phone jack and weighs less than Contact Resistance: .10 ohms maximum (spring to plug). 1/20 ounce. Can be wired for open or closed circuit operation. Shunt Resistance: .10 ohms maximum. Internally keyed insulators interlock all parts and tip springs Dielectric Withstanding Voltage: 250 V AC. grip mating plugs positively. Mates with Switchcraft Shunt Tension: 60 grams minimum. Micro-Plug® phone plugs. Jacks mount through .190 inch MATERIAL diameter hole in chassis/panels up to .093 inches thick. For < 5s insulated mounting, a .281 inch diameter hole and .050 inch Mounting Bushing: Nickel-plated copper alloy. maximum panel thickness applies. Order insulating washer _!sulating Spacers: Rigid plastic. separately. Number P1617 (flat phenolic washer) and Number — SPrings: Nickel-plated.copper allloy. Integral contacts P1618 (swedged fiber washer). are plated. x ee . Tip, Shunt and Sleeve Terminals: Silver-plated Number TR1PC: 2-conductor open or closed circuit jack with copper alloy. . PC terminals. Open frame and enclosed versions available. Hardware: Supplied with one, P15331 nickel-plated Mates with Switchcraft® Micro Plug? numbers 850, 855, and 880. copper alloy hex nut, and one 29571 nickel-plated SUBMINIATURE ENCLOSED PHONE JACKS copper alloy flat washer. Micro-D Jax® 2-conductor jacks have insulated box construc- MATERIAL - TRIPC y tion and subminiature size. Threaded Bushing: Nickel-plated copper alloy. ( Number MDPC2A: 2-conductor closed circuit jack with PC Tip Spring: Copper alloy. zi . terminals. Mounts to single-, double-sided or multilayer boards Sleeve/Ground Terminal: Copper allloy tin-lead with either singly or in rows as close as .344 inch centers (+/- 01 nickel underplate. inches). Bushing is .10 inch inside diameter. MECHANICAL - TR1PC Number MDSL2A: Same as MDPC2A except, 1. solder lugs, _Life: 10,000 insertion/withdrawal cycles, minimum. 2. bushing is #10-48 threaded (nut and washer supplied), and !sertion/Withdrawal Forces: 11 ounces insertion, 11 ‘on .313 inch centers, sleeves or adjacent jacks may be in ENVIRONMENTAL - TR1PC + intimate contact. Mounts through a .203 inch diameter hole in Thermal Range: -55°C to +85°C (non-operating); -20°C to , chassis/panels up to .063 inches thick. +65°C (operating). Thermal Shock: Per MIL-STD-202, method 107. internal parts. Panel/chassis or PC boards mounting in rows, CAE eee itt Linea vasa if desired, on .351 inch centers. PC terminals need only .382 T ‘ 4 fypical inch behind-panel clearance. Jack | Mating Number MDPC2ARA: PC terminals mount/terminate directly Part Number Description Schematic! | Plug? to PC or multilayer boards. Bushing clears a .156 inch diameter panel hole. MDSL2ARA: Right-angle solder lugs and #10-48 threaded | MDPC2A | 5 conductor bushing for chassis/panel mount. Mounts in .203 inch MDSL2A (closed circuit) diameter hole in chassis/panels up to .063 inches thick. MDPC2ARA et phy ‘See Jack Schematics, ni LO ES ges | Eanes 5 2) et A By i} al w ( Y (a —— \\ Ee mt Z ae | 6 ca NOTE: Contact your Switcherat Representative for price and delivery.