TR0110A SSDI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: TR0110A DOC Solid State Devices, Inc.

14701 Firestone Blvd * La Mirada, Ca 90638

Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com DESIGNER’S DATA SHEET Part Number / Ordering Information 1/ SFT5152 __ __ SFT5154 __ __ └ Screening 2/ __ = Not Screened TX = TX Level TXV = TXV Level S = S Level Package 3/ __ = TO-5 S.5 = SMD.5 SFT5152 and SFT5154

10 AMP

100 VOLTS

10 WATTS

Features:

  • Radiation Tolerant
  • Fast Switching, 500 nsec max ton
  • High Frequency, Typical f t = 100 MHz
  • BVCEO 80 Volts Min
  • High Linear Gain, Low Saturation Voltage
  • 200ºC Operating Temperature
  • Designed for Complementary Use with SFT5151 and SFT5153
  • Replacement for 2N5152 and 2N5154
  • TX, TXV, S-Level Screening Available2/ - Consult Factory Maximum Ratings Symbol Value Units Collector – Emitter Voltage VCEO 80 Volts Collector – Base Voltage VCBO 100 Volts Emitter – Base Voltage VEBO 5.5 Volts Collector Current IC 10 Amps Base Current IB 2.5 Amps Total Device Dissipation @ TC = 50ºC Derate above 50ºC PD 10 66.6 W mW/ºC Operating & Storage Temperature Top & Tstg -65 to +200 ºC Maximum Thermal Resistance Junction to Case R θJC 15 ºC/W N O T E S : * Pulse Test: Pulse Width = 300µsec, Duty Cycle = 2% 1/ For Ordering Information, Price, Operating Curves, and Availability Contact Factory. 2/ Screening per MIL-PRF-19500 3/ For Package Outlines Contact Factory. 4/ Unless Otherwise Specified, All Electrical Characteristics @25ºC. Available parts: SFT5152, SFT5152S.5 SFT5154, SFT5154S.5 TO-5 SMD.5

NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: TR0110A DOC Solid State Devices, Inc. Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SFT5152 and SFT5154 Electrical Characteristic 4/ Symbol Min Max Units Collector – Emitter Breakdown Voltage* IC = 100mA BVCEO 80 –– Volts Collector – Base Breakdown Voltage IC = 200µA BVCBO 100 –– Volts Emitter – Base Breakdown Voltage IE = 200µA BVEBO 5.5 –– Volts Collector – Cutoff Current VCE = 40V ICEO –– 50 µA Collector – Cutoff Current VCE = 60V, VBE = 2V, TC = 150°C ICEV –– 25 µA Collector – Cutoff Current VCE = 60V VCE = 100V ICES –– 1.0 1.0 µA mA Emitter – Cutoff Current VEB = 4V VEB = 5.5V IEBO –– 1.0 1.0 µA mA SFT5152 VCE = 5V, IC = 50mA VCE = 5V, IC = 2.5A VCE = 5V, IC = 2.5A, TA = -55°C VCE = 5V, IC = 5A DC Current Gain * SFT5154 VCE = 5V, IC = 50mA VCE = 5V, IC = 2.5A VCE = 5V, IC = 2.5A, TA = -55°C VCE = 5V, IC = 5A hFE 200 200 Collector – Emitter Saturation Voltage * IC = 2.5A, IB = 250mA IC = 5.0A, IB = 500mA VCE(Sat) –– 0.75

1.5 Volts

Base – Emitter Saturation Voltage * IC = 2.5A, IB = 250mA IC = 5.0A, IB = 500mA VBE(Sat) –– 1.45

2.2 Volts

Common Emitter small signal gain VCE = 5V, IC = 0.1A, f= 1kHz SFT5152 SFT5154 hfe 20 50 –– –– Current Gain Bandwidth Product VCE = 5V, IC = 0.5A, f = 20MHz SFT5152 SFT5154 f T 60 70 –– MHz Output Capacitance VCB = 10V, IE = 0A, f = 1MHz cob –– 250 pF Base – Emitter Voltage* VCE = 5V, IC = 2.5A VBE(ON) –– 1.45 Volts Safe Operating Area VCE = 5V, IC = 2.0A, 1 sec VCE = 32V, IC = 310 mA, 1 sec VCE = 80V, IC = 12.5mA, 1 sec SOA1 SOA2 SOA3 ON Time OFF Time tON tOFF –– 500 1500 nsec Storage Time Fall Time VCC = 30V, VEB(Off) = 3.7V IC = 5A VEB(Off) = 3.7V, IB1 = IB2 = 0.5A, RL = 6 Ohms tS tf –– 1.4 0.5 µsec

NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: TR0110A DOC Solid State Devices, Inc. Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SFT5152 and SFT5154 TO-5 PIN ASSIGNMENT Package Pin 1 Pin 2 Pin 3 (Case) TO-5 Emitter Base Collector SMD.5 .030 MIN 2x .103 .087 2x .010 MAX .233 .217 .128 .112 .030 MIN 3x .020 .010 .304 .288 .408 .392 .304 .288 .135 .115 PIN ASSIGNMENT Package Pin 1 Pin 2 Pin 3 (Case) SMD.5 Emitter Base Collector