TPVP93 TOTAL-POWER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

UNIVERSAL INPUT HARMONIC CORRECTION AC-DC OPEN FRAME SINGLE & MULTIPLE OUTPUT 50-100 WATTS INTERNAL SWITCHING POWER SUPPLIES TPVP93 SERIES FEATURES: „ ACCOMMODATE UNIVERSAL AC SOURCES „ MEET IEC1000-3-2 HARMONIC CORRECTION „ MEET UNIVERSAL SAFETY STANDARDS „ EMI MEET CISPR PUB. 22 CLASS B „ CE MARKING COMPLIANCE SPECIFICATION INPUT SPECIFICATION Input Voltage: Typ. 90-264Vac with PFC. Input Connector: Molex V-M connector. Input Frequency: 47-63Hz. Inrush Current: Typ. 23A @230Vac. Input Current: Typ. 1.5A@115Vac, 0.8A@230Vac. Dielectric Withstand: Meet IEC950. EMI: Meet CISPR PUB.22 Class B. Hold-up Time: Typ. 43mS @ 115Vac & 230Vac. Over Temp. Protection (OTP): Optional for U-Bracket format. Power Factor Correction: Meet Harmonic Correction Earth Leakage: Less than 0.63mA. Overload Protection (OLP): Fully protected against output overload and short circuit. Consult the factory for OLP setting. OUTPUT SPECIFICATION Output Voltage: See Ratings Chart. Output Current: See Ratings Chart. Output Connector: Molex V-M connector. Output Wattage: Typ. 50 Watts. convection. Max. 93 Watts under forced air flow. Line Regulation: Typ. 0.1-0.5%. Load Regulation: Main VO1: typ. ±1-2.0%. A u x . V O 2 : t y p . ± 3 - 5 . 0 % ( S t a c k e d o n ) . Noise & Ripple: Typ. 1% peak to peak. OVP: Installed in main VO1 only. Adjustability: Available at main VO1. OR-ing Diodes: Installed in VO1 & VO2. GENERAL SPECIFICATION Efficiency: Typ. 75%. Switching Frequency: Fixed freq. at 65K Hz. Circuit Topology: PWM Fixed-frequency Forward Circuit. Transient Response: Output voltage returns in less than 0.5mS following a 25% load change. Safety Standard: UL1950/ EN60950 Class I. Power Density: 2.5-5.0 Watts / Cubic Inch PCB format. 1.7- 3.37 Watts / Cubic Inch U-Bracket format. Operating Temperature: 0 to +50°C at full load and 30 cfm forced air flow for full load. Storage Temperature: -20 to +85°C. Temperature Coefficient: Typ. 0.04% /°C. Cooling: At least 20 cfm forced cooling air is required for 90 watts and up load Construction: PCB or U-bracket open frame format.

OUTPUT VOLTAGE / CURRENT RATINGS CHART MECHANICAL DIMENSIONS: MM [INCHES] WEIGHT: PCB 358.0g(12.6 Oz.) U-Bracket 541.0g(19.0 Oz.) SINGLE OUTPUT MAIN VO1 @⊙ MODEL NO. Convect- Cooling Volt. 30cfm air cooling TPVP93-S033250 12.0A 3.3V 25.0A TPVP93-S050200 10.0A 5.0V 20.0A TPVP93-S120085 4.2A 12.0V 8.5A TPVP93-S150068 3.4A 15.0V 6.8A TPVP93-S240043 2.1A 24.0V 4.3A TPVP93-S280038 1.8A 28.0V 3.8A TPVP93-S360030 1.5A 36.0V 3.0A TPVP93-S480022 1.2A 48.0V 2.2A DUAL OUTPUT MODEL NO. Convect- Cooling Volt. 30cfm air cooling Convect- Cooling Volt. 30cfm air cooling TRIPLE OUTPUT MAIN VO1@⊙ AUX. VO2 ⊙● or ■ AUX. VO3 ● MODEL NO. Convect- Cooling Volt. 30cfm air cooling Convect- Cooling Volt. 30cfm air cooling Convect- Cooling Volt. 30cfm air cooling Symbol: "★" OVP built-in "@" Adjustable "#" Remote sensing " ●" Post Regulator " ■" couple common choke "⊙" Installed with OR-ing diodes. INPUT & OUTPUT CONNECTORS PIN ASSIGNMENT AC INPUT DUAL OUTPUT ASSIGNMENT AC-L AC-N AC-G VO1 VO2 DC COM CNTR & PIN L N GND P2-7,8 P2-1 P2-2,3, 4,5,6 Mating connector: Molex 5195 or 5239 series INPUT & OUTPUT CONNECTORS PIN ASSIGNMENT AC INPUT DUAL OUTPUT TRIPLE OUTPUT ASSIGNMENT AC-L AC-N AC-G VO1 VO2 DC COM VO1 VO2 VO3 DC COM CNTR & PIN P1-L P1-N G P2-1,2 P2-6,7 P2-3, 5,6 Mating connector: Molex 5195 or 5239 series U-Bracket PCB