DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Total Power International, Inc. Toll Free:877-646-0900(US) PH# 978-453-7272 www.total-power.com UNIVERSAL INPUT HARMONIC CORRECTION AC-DC OPEN FRAME AND ACTIVE CURRENT SHARING MULTI-OUTPUT 200 WATTS INTERNAL SWITCHING POWER SUPPLIES TPVP200 SERIES FEATURES: ACCOMMODATE UNIVERSAL AC SOURCES MEET IEC 61000-3-2 HARMONIC CORRECTION THIRD-WIRE LOADING SHARING MEET UNIVERSAL SAFETY STANDARDS EMI MEET CISPR PUB.22 CLASS B +5V STAND-BY GREEN POWER CE MARKING COMPLIANCE GENERAL SPECIFICATION Efficiency: Typ. 65-70%. Switching Frequency: Fixed frequency at 70K Hz. Circuit Topology: PWM fixed-frequency forward circuit. Transient Response: Output voltage returns in less than 3mS following a 25% load change. Safety Standard: UL 60950-1/EN 60950-1 Class I. Power Density: 3.0 Watts / Cubic Inch. Operating Temperature: 0 to +50°C under forced air flow for full load. Storage Temperature: -20 to +85°C. Temperature Coefficient: Typ. ±0.04%/ °C. Cooling: 30 cfm air flow is required to deliver the full power 200W. Construction: U-bracket construction format. Note: Due to requests in market and advances in technology, specifications subject to change without notification. OUTPUT SPECIFICATION Output Voltage: See Ratings Chart. Output Current: See Ratings Chart. Output Connector: Molex #5273 V-M connector. Output Wattage: Convection 150 watts. With 30 cfm forced air 200W. Line Regulation: Typ. 0.1%. Load Regulation: Main O/P VO1: Typ. ±1.0%. Stand-By Green Power: +5V/50mA available. Noise & Ripple: Typ. 1.0% peak to peak. OVP: Available at VO1 & VO2. Remote Sense: Installed in VO1 & VO2. Adjustability: Available at VO1 & VO2. Load Sharing: Active current sharing circuit at VO1. Overload Protection (OLP): Fully protected against output overload and short circuit. Consult the factory for OLP setting. SPECIFICATION INPUT SPECIFICATION Input Voltage: Typ. 90-264Vac with PFC. Input Connector: Molex #5273 V-M connector. Input Frequency: 47-63Hz. Inrush Current: Typ. 33A @230Vac. Input Current: 2.25A @115Vac, 1.0 A@230Vac. Dielectric Withstand: Meet IEC 60950-1. EMI: Meet CISPR PUB.22 Class B. Hold-up Time: 18mS @115Vac & 230Vac. Power Fail Signal: Installed. DC OK Signal: Installed in VO1 & VO2. Power Factor Correction: Meet Harmonic Correction per IEC 61000-3-2 PF typ. 0.97-0.99. Remote Inhibit: Installed. Enable active high. Over Temperature Protection: Thermostat @ 95°C. Earth Leakage: Less than 0.75mA. For the details of safety approval, please consult the factory. Total Power International, Inc.
Total Power International, Inc. Toll Free:877-646-0900(US) PH# 978-453-7272 www.total-power.com OUTPUT VOLTAGE / CURRENT RATINGS CHART MECHANICAL DIMENSIONS: MM [INCHES] WEIGHT: 1,164.0g (41.0 Oz.) TRIPLE OUTPUT (Under forced air cooling) DUAL OUTPUT (Under forced air cooling) TPVP200-20 25.0A +5.0V 10.0A +5.0V TPVP200-21 25.0A +5.0V 5.0A +12.0V TPVP200-22 25.0A +5.0V 4.0A +15.0V TPVP200-23 25.0A +5.0V 2.5A +24.0V TPVP200-290A 25.0A +5.0V 15.0A +3.3V TPVP200-290B 30.0A +3.3V 15.0A +5.0V TPVP200-291 30.0A +3.3V 5.0A +12.0V TPVP200-292 30.0A +3.3V 4.0A +15.0V TPVP200-293 30.0A +3.3V 2.5A +24.0V QUAD OUTPUT (Under forced air cooling) PENTAD OUTPUT (Under forced air cooling) INPUT & OUTPUT CONNECTORS PIN ASSIGNMENT AC INPUT DUAL/TRIPLE/QUAD/PENTAD OUTPUT ASSORTED SIGNALS ASSIGNMENT AC-L AC-N AC-G +VO1 DC- COM VO2 VO5 VO3 VO4 -VO3 -VO4 DC- COM Enable Power Fail DC- OK +5V S. B. VO1 VO1 –S VO1 ≡ VO2 VO2 CNTR & PIN# P1-L P1-N P1-G P2-1, 2,3 P2-4, 5,6,7 P2-8,
10 P3-5,6 P3-7,8 P4-5 P4-3 P4-1 P4-2 P4-4 P4-7 P4-8 P4-6 P4-10 P4-9
Mating connector: P1,2,3 Molex # 5195 or 5239 series. P4 Molex # 5264 series or equivalent. Total Power International, Inc.