TPVP-103 TOTAL-POWER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

UNIVERSAL INPUT HARMONIC CORRECTION AC-DC OPEN FRAME SINGLE OUTPUT 100 WATTS INTERNAL SWITCHING POWER SUPPLIES TPVP103 SERIES FEATURES: „ 5" X 3" X 1" COMPACT SIZE & HIGH POWER DENSITY „ ACCOMMODATE UNIVERSAL AC SOURCES „ MEET IEC1000-3-2 HARMONIC CORRECTION (PFC) „ MEET UNIVERSAL SAFETY STANDARDS „ EMI MEET EN55022 & FCC CLASS B „ CE MARKING COMPLIANCE GENERAL SPECIFICATION Efficiency: Typ. 75-84%. various with output voltage. Switching Frequency: PWM 175K Hz. (PFC: 75K Hz.) Circuit Topology: Fixed Frequency Forward Circuit. Transient Response: 0.5mS following 25% load change. Safety Standard: IEC950/ UL1950 Class I. Power Density: 6.73 Watts / Cubic Inch. Operating Temperature: 0 to +50°C under 20 cfm forced air cooling for full load. Storage Temperature\\Humidity: -20 to +85°C, 95% non-condensing. Temperature Coefficient: ±0.04% /°C. Cooling: At least 20cfm moving air is required to achieve full rating power, ≥+50°C in a confined area. Construction: L-bracket format. Note: All measurements are at nominal input, full load, and +25°C unless otherwise specified. OUTPUT SPECIFICATION Output Voltage: See Ratings Chart. Output Current: See Ratings Chart. Output Power: 100W continuous. Various with output voltage & under forced air cooling. Output Connector: V-M Molex 0.156” connector for <12A output. M-T Mini Terminal Block for ≥12A output. Line Regulation: Typ. 0.1%. Load Regulation: Typ. ± 1.0%. Noise & Ripple: Typ. 1.0% peak to peak. OVP: Built-in. Adjustability: Available. Remote Sensing: Available. Overload Protection (OLP): Fully protect against output overload & short circuit. Consult the factory for OLP setting. SPECIFICATION INPUT SPECIFICATION Input Voltage: Typ. 90-264Vac with PFC. Input Connector: V-M connector & GND tag. Input Frequency: 47-63Hz. Inrush Current: Typ. 26A @ 230Vac. Input Current: Typ. 1.0A @115Vac, 0.5A @230Vac. Dielectric Withstand: Meet IEC950. EMI: Meet EN55022 & FCC Class B. Hold-up Time: Typ. 25mS @115Vac & 230Vac. Power Factor & Harmonic Correction: Meet IEC1000-3-2, PF typ. 0.97-0.99 @ full load. Turn-on Delay/Rise Time: 2 Sec./5mS. Earth Leakage: Less than 0.5mA @230Vac.

MODEL NO. DESCRIPTION: TPVP103 - X X X Y Y Y Remark: Please specify the V/A rating and c o n s u l t f o r M o d e l N o . O U T P U T C U R R E N T O U T P U T V O L T A G E SERIES NO. OUTPUT VOLTAGE / CURRENT RATINGS CHART DEFINED OUTPUT VOLTAGE (Vdc) OUPUT VOLTAGE (Vdc) / CURRENT (A) 3.3 Vdc ≤Any Voltage ≤12.0 Vdc 12.0Vdc<Any Voltage ≤24.0 Vdc SINGLE OUTPUT (Model No. for example) MAIN O/P VO1 ★@# MODEL NO. Min. Typ. Volt. Peak CONTINUOUS POWER TPVP103-033200 0.8A 20.0A 3.3V 25.0A 66W TPVP103-050180 0.6A 18.0A 5.0V 25.0A 90W TPVP103-120085 0.0A 8.5A 12.0V 11.0A 102W TPVP103-150068 0.5A 6.8A 15.0V 8.5A 103W TPVP103-240042 0.3A 4.2A 24.0V 5.0A 100W Symbol: "★" OVP built-in. "@" Adjustab le. "#" Remote sensing. Remark: Peak output, less than 60sec. with 10% duty cycle. MECHANICAL DIMENSIONS: MM [INCHES] WEIGHT: 319.0g (11.25 Oz.) INPUT & OUTPUT CONNECTORS PIN ASSIGNMENT AC INPUT SINGLE OUTPUT ASSIGNMENT LINE NEUTRAL GROUND VO1 DC-COM Remote Sensing CONNECTOR P2-1,2,3(<12A) P2-3,4(≧12A) P2-4,5,6(<12A) P3-1(+S) P3-2(-S) Mating connector: P1 & P2 Molex # 5195 or 5239 equivalent. P3 Molex # 5051 series or equivalent.