TPVI-19 TOTAL-POWER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Total Power International, Inc. Total Power International, Inc Toll Free: 877-646-0900(US) PH# 978-453-7272 www.total-power.com UNIVERSAL INPUT AC-DC OPEN FRAME SINGLE & MULTI-OUTPUT 19-20 WATTS INTERNAL SWITCHING POWER SUPPLIES TPVI19 SERIES FEATURES: ACCOMMODATE UNIVERSAL AC SOURCES COMPACT OPEN FRAME FORMAT MEET UNIVERSAL SAFETY STANDARDS EMI MEET CISPR PUB. 22 & FCC CLASS B CE MARKING COMPLIANCE SPECIFICATION INPUT SPECIFICATION Input Voltage: Range typ. 90-264Vac. Rating 100 to 240Vac. Input Connector: Molex 5273(vertical). Mating Connector: Molex 5195 or equivalent. Input Frequency: 47-63Hz. Inrush Current: Typ. 20A @ 230Vac. Input Current: Typ. 0.70A @115Vac, 0.3A@230Vac. Dielectric Withstand: Meet IEC 60950-1. EMI: Meet CISPR PUB. 22 & FCC Class B. Hold-up Time: Typ. 40mS @115Vac, 150mS @230Vac. Earth Leakage: Less than 0.3mA @230Vac. OUTPUT SPECIFICATION Output Voltage: See Ratings Chart. Output Current: See Ratings Chart. Output Connecter: Molex 5273 or 41671. Mating Connector: Molex 5195 or 3069. Output Wattage: PCB 19 watts, L-Bracket 25 watts. Line Regulation: Typ. 0.1%. Load Regulation: Main VO1 typ. ±1-2% Aux. VO2 typ. ± 3-5% (stacked on). Noise & Ripple: Typ. 1.0% peak to peak. OVP: Built-in at Main VO1. Adjustability: Available at Main VO1. Overload Protection (OLP): Fully protected against output overload and short circuit. OLP set at about 125-150% rating output wattage. Consult the factory for OLP setting. GENERAL SPECIFICATION Efficiency: Typ. 70%. Switching Frequency: 40K Hz. Circuit Topology: Free-running flyback circuit. Transient Response: Output voltage returns in less than 3ms following a 25% load change. Power Density: 1.26-1.58 Watts /Cubic Inch. Operating Temperature: 0 to +50 °C. Storage Temperature: -20 to +85 °C. Temperature Coefficient: Typ. 0.04% / °C. Cooling: Free air convection cooling. Safety Standard: UL 60950-1/EN 60950-1 Class I. Construction: PCB or L-Bracket format. Note: Due to requests in market and advances in technology, specifications subject to change without notification. For the details of safety approval, please consult the factory.
Total Power International, Inc. Total Power International, Inc Toll Free: 877-646-0900(US) PH# 978-453-7272 www.total-power.com MODEL NO. MAIN VO1 @ Typ. Volt. Max. AUX. +VO2 †or -VO3 Typ. Volt. Max. TPVI19-20 3.0A +5V 4.0A 0.20A -5V 1.0A TPVI19-20(L-B) 4.0A +5V 5.0A 0.50A -5V 1.0A TPVI19-21 2.6A +5V 3.0A 0.50A ±12V 1.0A TPVI19-21(L-B) 4.0A +5V 5.0A 0.50A ±12V 1.0A TPVI19-22 2.6A +5V 3.0A 0.40A ±15V 0.8A TPVI19-22(L-B) 4.0A +5V 5.0A 0.40A ±15V 0.8A TPVI19-23 2.6A +5V 3.0A 0.25A +24V 0.5A TPVI19-23(L-B) 4.0A +5V 5.0A 0.25A +24V 0.5A OUTPUT VOLTAGE / CURRENT RATINGS CHART SINGLE OUTPUT DUAL OUTPUT 1.2A TRIPLE OUTPUT MODEL NO. MAIN VO1 @ Typ. Volt. Max. AUX. VO2 † Typ. Volt. Max. AUX. VO3 Typ. Volt. Max. Remark: (1) At least 20% of typical main output current is required to maintain stated regulation. (2) Max. current can't be drawn from all output at the same time. MECHANICAL DIMENSIONS: MM [INCHES] WEIGHT: PCB 148.0g(5.2 Oz.) L-B 223.0g(7.9 Oz.) PCB FORMAT L-B FORMAT INPUT & OUTPUT CONNECTORS PIN ASSIGNMENT AC INPUT SINGLE SINGLE/DUAL/TRIPLE OUTPUT ASSIGNMENT AC-L AC-N AC-G VO1 DC COM VO1 VO2 VO3 DC COM CONNECTOR or PIN# P1-L P1-N P1-G P2-3,4 P2-1,2 P2-2 P2-3 P2-4 P2-1 Mating connector: P1 Molex 5195 or 5239 series. P2 Molex 5195, 5239 or 3069 series. MODEL NO. MAIN VO1 @ Typ. Volt. Max. TPVI19-10 4.0A 5V 5.0A TPVI19-10(L-B) 4.6A 5V 5.0A TPVI19-11 1.5A 12V 1.5A TPVI19-11(L-B) 2.0A 12V 2.5A TPVI19-12 1.2A 15V 1.3A TPVI19-12(L-B) 1.6A 15V 1.7A TPVI19-13 0.8A 24V 1.0A TPVI19-13(L-B) 1.0A 24V